• Journal of Information Technology Services
• /
• v.7 no.2
• /
• pp.181-195
• /
• 2008

The rapid growth of mobile communication technology has provided the expansion of mobile internet services, particularly mobile realtime transaction takes much weight among mobile fields. There is an increasing demand for various mobile applications to process transactions in a mobile computing fields. Thus, During transmission in wireless networks a base station failure inevitably causes data loss of the base station buffer. It is required to compensate the loss for communication. The existing methods for a base station failure are not adequate because they all suffer from too much overhead and resolve only the link failure. In this paper, we study an efficient recovry systems for a mobile DBMS. We propose SLL (Segment Log List) that enables the mobile host to compensate data loss efficiently in the case of base station failure. In SLL, a base station deliveries an output information of data cells to a mobile host. when a base station fails, the mobile host can retransmit just next data cells. We also prove the efficiency of new method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.341-349
• /
• 2010

In this paper, we studied on the optimization of the output power of Mobile WiMAX (IEEE 802.16) base station considering the technical condition of base station and wireless channel condition. The optimum power of base station can be estimated based on the link budget calculation of downlink and uplink in the Mobile WiMAX communication system. We investigated the optimum output power of base station in the case of 2Tx-2Rx base station with $2{\times}2$ MIMO(multiple input multiple output) technology, 2Tx-4Rx base station with improved receiver sensitivity, and 4Tx-4Rx base station with beamforming technology.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.815-820
• /
• 2001

This paper presents a distributed mobile architecture aimed to support the mobility of mobile station. The proposed architecture considers three significant objects；mobile station (MS), mobile agent (MA) which logically represents mobile station in the wireline network, and trace agent (TA) to represent application server (AS) providing application service to mobile station. The mobile agent is made closely coupled with the mobile station while the trace agent is made closely coupled with the application server. During the handoff process, a flow control mechanism is considered to correct packet loss and out-of-sequence packets problem. The result of analytic additional time delay due to handoff processing is presented and simulation was performed to check the additional time delay as well as the correctness of handoff algorithm.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.297-300
• /
• 2004

In cellular communication, subscriber authentication is an essential technique. The mobile station should operate in conjunction with the base station to authenticate the identity. In CDMA system, authentication is the process by which information is exchanged between a mobile station and base station for the purpose of confirming the mobile station. A successful authentication process means that the mobile station and base station process identical sets of shared secret data(SSD). SSD can be generated by authentication algorithms. The cryptographic hash function is a practical way of authentication algorithms. In this paper, we propose and implement MD5 and SHA-1 with modified structure.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.5
• /
• pp.103-108
• /
• 2016

In this paper, we propose a resource allocation scheme that guarantees transmission rate for each mobile stations by mitigating interference between a base station-to-mobile station link and a relay station-to-mobile station link. Specifically, we dynamically adjust the boundary between access zone and relay zone using signal to interference plus noise ratio. Moreover, we cluster the mobile stations under sever interference and manage the channel quality of these mobile stations by allocating additional radio resource. Our simulation results show that the proposed scheme can improve the efficiency of radio resources and ensure fairness among mobile stations.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.65-68
• /
• 2000

In this paper, design parameters are investigated and design procedure is established for PCS mobile station, especially for receiver RF block. And simulation environment to analyze parameters of the receiver RF block to determine whether it satisfies the receiver standard, IS-98C, is calculated. Design parameters are simulated and optimized. With simulated results, PCS mobile station is implemented and tested. Measured results show good agreement with simulation Design procedure can be used to get optimum characteristics for each of receiver block. By using optimum characteristics, mobile station can be designed more efficiently.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.121-124
• /
• 1999

In a packet-switched wireless cellular network, a packet destined to a mobile station is queued at a base station and then broadcast over the base station's cell. When an active mobile station leaves a cell, there re-main packets which are destined to the mobile and not yet delivered to it at the cell's base station. For application which are sensitive to packet losses, such back- logged packets must be forwarded to the new base station. Otherwise, an end-to-end retransmission may be required. However, an increase in packet delay is incurred by employing the packet forward scheme, since a packet may be forwarded many times before it is delivered to the destined mobile station. For an enhanced quality-of-service level, it is preferred to reduce tile packet delay time. In this paper, we develop an analytical approximation method for deriving mean packet delay times. Using the approximation and simulation methods, we investigate the effect of network parameters on the packet delay time.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.94.4-94
• /
• 2001

An acoustic ranging system was applied for reckoning the location of an agricultural vehicle in the field. The system has a number of fixed stations and a mobile station such as an agricultural vehicle. The mobile station comprises a radio frequency modulator-demodulator (RF MODEM), a buzzer, and a personal computer. The fixed station comprises an (RF MODEM), a microphone, an amplifier for the microphone, and a personal computer with a soundboard. The mobile station transmits a 7-bit ASCII code and, activates the buzzer simultaneously. The propagation delay time at the fixed station is caused by the difference ...

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2093-2095
• /
• 2002

Nowadays, there are actually lots of changes in wireless communications of Korea. But it is not an exact PTP(Peer to Peer) Communication. In other words, a mobile station which can find fixed station can be connected with wireless internet server or other services, oppositely fixed station cannot approach to mobile station. Even though it exists, it is difficult to communicate with full duplex. We can service using CDMA 1X techniques such as cellular based SMS (Short Message Service) service or very simple MPRG Services. In this paper, we propose a system, using DirectX based mobile/fixed station stand alone program, depending on bandwidth of wireless service provider, tranceiving high resolution moving picture or reliable data regularly by a fixed connection each other.