• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.1-9
• /
• 2009

Relay-assisted multiple input technique has become a promising candidate for next generation broadband wireless communications. In this paper, we propose channel selective relay-based multiple input transmission system. In the proposed system, single carrier frequency division multiple access (SC-FDMA) and orthogonal frequency division multiple access (OFDMA) are adopted for uplink and downlink transmissions, respectively. The performance of relay-based system can be improved by using the subcarriers selectively based on the channel condition between relay station (RS) and mobile station, or between RS and base station. Simulation results show that the proposed relay-based system considerably outperforms the conventional relay-based system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.414-420
• /
• 2009

In this paper, we investigate throughput performance of OFDMA-based relay systems according to the "sub-cell coverage configuration" of the base station (RS) and the relay station (RS). RS is exploited for improved quality of the received signal with a tradeoff of additional radio resource consumption which may result in degradation of the throughput performance of the system. Therefore, "radio resource reuse" may be necessary for high performance in relay systems. However, it also causes system performance degradation since resource reuse between RSs incurs channel interference. Therefore, effective resource reuse also should be considered for "high throughput coverage configuration" when relays are employed. We relate the resource reuse patterns of neighboring RSs to sub-cell coverage configuration. We determine the sub-cell coverage of the system depending on the ratio of received signal-interference-noise-ratio (SINR) of the mobile station (MS) from the BS and RS, respectively. Simulations illustrate the throughput performance as the function of SINR ratio, and it has different optimal point depending on the resource reuse patterns. Therefore, the "resource reuse pattern" and the "effective sub-cell coverage configuration" should be considered together for the high throughput performance of the relay system.

• Information and Communications Magazine
• /
• v.24 no.5
• /
• pp.15-26
• /
• 2007

최근 WiBro/WiMAX에서 기지국의 용량증대와 셀의 크기를 확정하는 것을 목적으로 하는 RS(Relay Station)에 대한 표준화가 IEEE 802.16j에서 이루어지고 있다. RS는 기존의 아날로그 중계와 달리 수신신호를 복조 및 복호화한 후 특정 처리과정을 거친 후 다시 부호 및 부호화하여 전송하는 기능을 갖는다. 초고속 휴대인터넷서비스를 제공하고 있는 초고속 무선인터넷서비스 시장에 대한 수요의 증대로 WiBro/WiMax시장의 활성화와 IEEE 802.16j에 대한 표준화의 진척에 따라 WiBro용 RS(Relay Station)상용제품이 조만간 출시 될 것으로 보인다. 본고에서는 WiBrro용 MMR(Mobile Multi-hop relay)기술의 표준화 동향과 요소기술, MMR망의 성능분석에 대해서 기술한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.530-538
• /
• 2010

In this paper, estimation methods of cell searching and DoA (Direction of Arrival) for mobile relay stations with a uniform linear array are proposed. The proposed methods can improve the performance of cell searching and DoA estimation by removing the effect of STOs when there exist symbol timing offsets (STOs) between the signals received from adjacent base stations,. Also, the proposed methods can improve the performance of DoA estimation significantly when there exists Doppler frequency shift caused by movement of the mobile relay station. The performances and computational complexities of the proposed cell searching and DoA methods are evaluated by computer simulation under Mobile WiMAX environments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.59-64
• /
• 2014

This paper address the scheme for WiMAX backhaul in mobile communication network. These days most ISPs has implemented Wi-Fi backhaul using T1/E1 and DSL. if WiMAX is installed as the alternative to the mobile backhaul, it can decrease the costs drastically for the installation and operations. And it will be one of the best cost-effective solutions to cover the service areas which has not the wired communication infrastructure. WiMAX can be used for Base station, Subscriber Station, and Relay. In this paper, the performance is measured for downstream and upstream using NAT and port forwarding functions by configuring WiMAX server and WiMAX SS.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.634-639
• /
• 2008

In mobile communication networks, the main power consumption is due to the actual transmissions power. Therefore, power efficiency network structures have gained considerable importance in mobile multi-hop systems and networks in recent years. In this paper, the performance of mobile multi-hop wireless system with M-QAM signal and forward error control (FEC) technique are analyzed The FEC technique uses extra processing power related to encoding and decoding, it is need complex functions to be built into the communication node. The probability of receiving a correct bit and codeword for relaying a data frame over h hop relay station to the final station is evaluated as a function of channel parameter and number of hops, and the distance between the different station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1156-1164
• /
• 2008

In this paper, we propose a bi-directional coding method (BTC) using time reversal mirror for effective data exchange between mobile stations and basestations. In conventional relay systems, while one node transmits data, other nodes should keep silent to avoid interference. Thus, to interchange data between basestations and mobile stations, it needs four stages. However, using the proposed BTC method, a relay station transmits a probe source before data transmission, and using this information, mobile stations and basestations transmit data to the relay station simultaneously. Therefore, since it exchanges data in only two steps, the system achieves improved system capacity. In addition, owing to no need for complex calculation, the relay system can be implemented with low complexity. The simulation results demonstrate that the proposed method achieves enhanced system capacity.

• Journal of Communications and Networks
• /
• v.17 no.1
• /
• pp.84-92
• /
• 2015

Multi-hop relay networks have been widely considered as a promising solution to extend the coverage area and to reduce the deployment cost by deploying the relay stations (RSs) in mobile communication systems. Suitable deployment for the RSs is one of the most important features of the demand nodes (DNs) to obtain a high data transmission rate in such systems. Considering a tradeoff among the network throughput, the deployment budget, and the overall coverage of the systems, efficient RS deployment schemes and corresponding algorithms must be developed and designed. A novel cluster-based RS deployment scheme is proposed in this paper to select the appropriate deployment locations for the relay stations from the candidate positions. To make an ideal cluster distribution, the distances between the DNs are calculated when deploying the RSs. We take into account the traffic demands and adopt a uniform cluster concept to reduce the data transmission distances of the DNs. On the basis of the different candidate positions, the proposed scheme makes an adaptive decision for selecting the deployment sites of the RSs. A better network throughput and coverage ratio can be obtained by balancing the network load among the clusters. Simulation results show that the proposed scheme outperforms the previously known schemes in terms of the network throughput and the coverage ratio. Additionally, a suitable deployment budget can be implemented in multi-hop relay networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.40-46
• /
• 2007

In this paper, the effect of a Doppler Spread caused by a mobile station (MS) is analyzed for transparent mobile multi-hop relays (MMR) systems based on orthogonal frequency division multiplexing (OFDM). The exact expression of interchannel interference (ICI) power and the upper bounds of ICI power are derived for OFDM systems with cooperative MMR or non-coopeartive throughput enhancement (TE) MMR. Also, the exact signal-to-interference ratio (SIR) and its lower bound as well as ICI power and its upper bound, derived in this paper, are evaluated by computer simulation with the OFDM parameter set used for mobile WiMax (WiBro) systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.307-314
• /
• 2010

In this paper, a receive diversity combining technique is proposed for single-carrier frequency division multiple access (SC-FDMA)-based cooperative relay systems when discrete Fourier transform (DFT) spreading sizes for mobile station (MS) and relay station (RS) are different. The proposed technique is composed of a DFT spreading size adjustment block, a phase rotation compensation block, a channel phase compensation block, and a receive diversity combining block. The proposed technique is robust to multipath channels and can be operated with a relatively small computational complexity because receive diversity combining is performed with scalar operations in the frequency-domain. It is shown by computer simulation that the proposed receive diversity combining techniques achieve a performance gain over the conventional maximal ratio combining (MRC) techniques for SC-FDMA-based cooperative relay systems.