• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.21-25
• /
• 2005

In order to implement high pixel density in AMLCDs, high aperture ratio is a very important design factor. We have implemented VGA panels with IPS and TN modes. IPS mode is a very attractive solution to meet the requirement for mobile phone displays. It provides much higher aperture ratio as well as wider viewing angle at extremely high pixel density over 400 ppi.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.535-542
• /
• 2005

This paper proposes an on-demand ad hoc routing protocol, Node Density Based Routing (NDBR), which enhances the routing performance applying a new method to establish alternate patlis. It is important to reserve alternate paths for the route from source to destination in mobile ad hoc networks that are susceptible to failure due to the movement or the power exhaustion of mobile nodes. NDBR aims to establish a route that contains more alternate paths toward the destination by involving intermediate nodes with relatively more adjacent nodes in a possible route, and introduces a new routing criterion called 'node density.' This approach can localize the effects of route failures, and reduce control traffic overhead and route reconfiguration time by enhancing the reachability to the destination node without source-initiated route re-discoveries at route failures. This paper describes the route setup procedure using node density and the route re-configuration procedures employing alternate path information at the intermediate nodes. We show the performance of our routing schemes through a series of simulations using the Network Simulator 2 (ns-2).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.3
• /
• pp.311-316
• /
• 2009

This paper presents the motion estimation algorithm on real-time for mobile surveillance robot using particle filter. the particle filter that based on the monte carlo's sampling method, use bayesian conditional probability model which having prior distribution probability and posterior distribution probability. However, the initial probability density was set to define randomly in the most of particle filter. In this paper, we find first the initial probability density using Sum of Absolute Difference(SAD). and we applied it in the partical filter. In result, more robust real-time estimation and tracking system on the randomly moving object was realized in the mobile surveillance robot environments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.339-339
• /
• 2012

현재 MOS 소자에 사용되고 있는 $SiO_2$ 산화막은 그 두께가 얇아짐에 따라 Gate Leakage current와 여러 가지 신뢰성 문제가 대두되고 있고, 이를 극복하고자 High-k물질을 사용하여 기존에 발생했던 Gate Leakage current와 신뢰성 문제를 해결하고자 하고 있다. 본 실험에서는 High-k(hafnium) Gate Material에 온도 변화를 주었을 때 여러 가지 전기적인 특성 변화를 보는 방향으로 연구를 진행하였다. 기본적인 P-Type Si기판을 가지고, 그 위에 있는 자연적으로 형성된 산화막을 제거한 후 Hafnium Gate Oxide를 Atomic Layer Deposition (ALD)를 이용하여 증착하고, Aluminium을 전극으로 하는 MOS-Cap 구조를 제작한 후 FGA 공정을 진행하였다. 마지막으로 $300^{\circ}C$, $450^{\circ}C$로 30분정도씩 Annealing을 하여, 온도 조건이 다른 3가지 종류의 샘플을 준비하였다. 3가지 샘플에 대해서 각각 I-V (Gate Leakage Current), C-V (Mobile Charge), Interface State Density를 분석하였다. 그 결과 Annealing 온도가 올라가면 Leakage Current와 Dit(Interface State Density)는 감소하고, Mobile Charge가 증가하는 것을 확인할 수가 있었다. 본 연구는 향후 High-k 물질에 대한 공정 과정에서의 다양한 열처리에 따른 전기적 특성의 변화 대한 정보를 제시하여, 향후 공정 과정의 열처리에 대한 방향을 잡는데 도움이 될 것이라 판단된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.8-11
• /
• 2007

The new technologies in mobile display developed in SEC are briefly reviewed. For a differentiation, SEC's LTPS line is based on SLS (Sequential Lateral Solidification) technology. In this paper, the characteristics of SEC's SLS in recent and future mobile displays were discussed. The microstructure produced by SLS crystallization is dependent on SLS process conditions such as mask design, laser energy density, and pulse duration time. The microstructure and TFT (Thin Film Transistor) performance are closely related. For an optimization of TFT performance, SLS process condition should be adjusted. Other fabrication processes except crystallization such as blocking layer, gate insulator deposition and cleaning also affect TFT performance. Optimized process condition and tailoring mask design can make it possible to produce high quality AMOLED devices. The TFT non-uniformity caused by laser energy density fluctuation could be successfully diminished by mixing technology.

• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1077-1088
• /
• 2013

As broadcasting is the process that a node sends a packet to all nodes in the network. it is basic process used for discovering of a routes to a node and disseminating of control information message in Mobile Ad hoc NETwork (MANET). In this paper, we propose dynamically adjusted probabilistic mechanism based on distance ratio and node density for broadcasting in MANETs. The distance ratio can be calculated as the ratio of the radio strength length to the distance from sender of a node, and node density can be get from 1-hop nodes of neighbours. A mobile node receiving broadcast packets determines the probability of rebroadcasting considering distance ratio and node density of itself. Rebroadcast probability will be set as low value to a node which is located in nearby area of sender and has high 1-hop node density, So it reduces packets transmission caused by the early die-out of rebroadcast packets. Compared with the simple flooding and fixed probabilistic flooding by simulation, our approach shows better performances results. Proposed algorithm can reduce the rebroadcast packet delivery more than 30% without scanting reachability, where as it shows up to 96% reachability compared with flooding.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.49.1-49
• /
• 2001

The skin color model is a very important concept in face detection, face recognition and face tracking. Usually, this model is obtained by estimating a probability density function of skin color distribution. In many cases, it is assumed that the underlying density function follows a Gaussian distribution. In this paper, a new method for non-parametric estimation of the probability density function, by using feed-forward neural network, is used to estimate the underlying skin color model. By using this method, the resulting skin color model is better than the Gaussian estimation and substantially approaches the real distribution. Applications to face detection and face ...

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.373-374
• /
• 2007

• ETRI Journal
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2007

In this paper, we analyze the algorithm of the methodology developed by ITU for the calculation of spectrum requirements of IMT-Advanced. We propose an approach to estimate user density using traffic statistics, and to estimate spectrum efficiencies using carrier-to-interference ratio distribution and capacity theory as well as experimental data under Korean mobile communication environments. We calculate the IMT-Advanced spectrum requirements based on the user density and spectral efficiencies acquired from the new method. In the case of spectral efficiency using higher modulation and coding schemes, the spectrum requirement of IMT-Advanced is approximately 2700 MHz. When applying a $2{\times}2$ multiple-input multiple-output (MIMO) antenna system, it is approximately 1500 MHz; when applying a $4{\times}4$ MIMO antenna system, it is approximately 1050 MHz. Considering that the development of new technology will increase spectrum efficiency in the future, the spectrum requirement of IMT-Advanced in the Korean mobile communication environment is expected to be approximately 1 GHz bandwidth.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1729-1732
• /
• 2007

We introduce a mobile-type 3D display that achieves a full directional motion parallax and the real time interactions between the observer and the 3D image at the same time. These effects can be unique specified to the mobile-type 3D display.