• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.428-435
• /
• 2004

With the rapid and wide-spread use of cellular telephones much attention has been focussed on propagation in the urban area crowed with buildings and houses. It is often surrounded by hills, forests, and mountains. The importance of surface scattering intereference between transmitters and receivers on the rough surfaces has been interested and investigated. Therefore, a prediction method is necessary to estimate the influence of rough surfaces on microwave radio propagation. Moreover, most of the mobile communications are performed based on the digital communication system rather than the analog one. In this case, we must pay more careful attention to the signal delay caused by the phase delay due to the multi-path propagation. In this paper we have analyzed numerically scattering of electromagnetic waves from building walls by using FVTD(Finite Volume Time Domain) method. We consider three different types of rough surfaces such as periodic, random, and composite structures. We calculate the bistatic normalized radar cross section (NRCS) for horizontal and vertical polarization, and we take account of the conventional optical reflection which corresponds to the n-th Bragg reflection for periodic structures. In addition, we investigated what conditions are needed in order to be able to ignore the higher order Bragg reflection for the periodic structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.517-531
• /
• 1999

This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.26-34
• /
• 2002

Mobile telecommunication systems such as IS-95 and IMT-2000 employ frame based communication using frames up to 20 msec in length and the receiving end has to store the whole frome before it is being processed. The size of the frame buffer ofter dominates those of the processing unit such as soft decision Viterbi decoder. The frame buffer for IMT-2000, for example, has to be increased 80 times as large as that of IS-95. One of the parameters deciding the number of bits in a frame will be obviously the number of bits in soft quantization. Start after striking space key 2 times. This paper has studied a new aspect of offset and quantization step size on BER performance and proposes a new 3-bit soft quantization algorithm which shows similar performance as that of 4-bit soft decision Viterbi receiver. The optimal offset values and step sizes for the other practical quantization levels ---16, 8, 4, 2--- have also been found. In addition, a new optimal symbol metric table has been devised which takes the accumulation value of various repeated signals and produces a rescaled 3-bit valu.tart after striking space key 2 times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6B
• /
• pp.954-961
• /
• 2010

Stream cipher was worse than block cipher in terms of security, but faster in execution speed as an advantage. However, since so far there have been many algorithm researches about the execution speed of block cipher, these days, there is almost no difference between them in the execution speed of AES. Therefore an secure and fast stream cipher development is urgently needed. In this paper, we propose a 32bit output fast stream cipher, AA32, which is composed of ASR(Arithmetic Shifter Register) and simple logical operation. Proposed algorithm is a cipher algorithm which has been designed to be implemented by software easily. AA32 supports 128bit key and executes operations by word and byte unit. As Linear Feedback Sequencer, ASR 151bit is applied to AA32 and the reduction function is a very simple structure stream cipher, which consists of two major parts, using simple logical operations, instead of S-Box for a non-linear operation. The proposed stream cipher AA32 shows the result that it is faster than SSC2 and Salsa20 and satisfied with the security required for these days. Proposed cipher algorithm is a fast stream cipher algorithm which can be used in the field which requires wireless internet environment such as mobile phone system and real-time processing such as DRM(Digital Right Management) and limited computational environments such as WSN(Wireless Sensor Network).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.33-43
• /
• 2010

Recently, users want to use real-time multimedia services, such as internet, VoIP, etc., using their IEEE 802.11 wireless lan mobile stations. In order to provide such services, a handoff among access points is essential to support the mobility of a node, in such an wide area. However, the legacy handoff methods of IEEE 802.11 technology are easy to lose connections. Also, the recognition of a disconnection and channel re-searching time make the major delay of the next AP to connect. In addition, because IEEE 802.11 decides the selection of an AP depending only on received signal strength, regardless of a node direction, position, etc., it cannot guarantee a stable bandwidth for communication. Therefore, in order to provide a real-time multimedia service, a node must reduce the disconnection time and needs an appropriate algorithm to support a sufficient communication bandwidth. In this paper, we suggest an algorithm which predicts a handoff point of a moving node by using GPS location information, and guarantees a high transmission bandwidth according to the signal strength and the distance. We implemented the suggested algorithm, and confirmed the superiority of our algorithm by reducing around 3.7ms of the layer-2 disconnection time, and guaranteed 24.8% of the communication bandwidth.

• The Journal of Information Systems
• /
• v.24 no.1
• /
• pp.95-117
• /
• 2015

With the active smartphones user exceeding 500 million by the end of 2014, China has now become the largest smartphone market in the world. Smartphone companies provide variety of information through a range of applications, such as communications, entertainment, games, and so on. There were many studies conducted about the user acceptance and continuous intention of mobile service. However, it is still not quite clear what factors attract people to reuse smartphone in China. This paper examines the continuous intention of smartphone about Chinese customers. This study incorporates perceived enjoyment as a additional construct into a extended TAM model, by integrating a hedonic service of smartphone. We propose a research model that reflects the individual characteristics and usage contexts of smartphone, such as innovativeness, social influence, and service quality, and analyze the structural relationship between the main variables through empirical study. This study empirically investigated a research model and conducted a survey of smartphone service users in China. Our study proved that perceived enjoyment has a positive influence on continuous intention to use smartphone services. This paper provides the managers an insight that smartphone companies should take more consideration on how to provide more enjoyable service and attract customers to reuse their services.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.337-351
• /
• 2018

This paper discusses 5G IOT, Augmented Reality, Cloud Computing, Big Data, Future Autonomous Driving Vehicle technology, and presents 5G utilization of Pyeongchang Winter Olympic Games and Jeju Smart City model. The reason is that 5G is the main artery of the 4th industry.5G is the fourth industrial aorta because 5G is the core infrastructure of the fourth industrial revolution. In order for the AI, autonomous vehicle, VR / AR, and Internet (IoT) era to take off, data must be transmitted several times faster and more securely than before. For example, if you send a stop signal to LTE, which is a communication technology, to a remote autonomous vehicle, it takes a hundredth of a second. It seems to be fairly fast, but if you run at 100km / h, you can not guarantee safety because the car moves 30cm until it stops. 5G is more than 20 gigabits per second (Gbps), about 40 times faster than current LTE. Theoretically, the vehicle can be set up within 1 cm. 5G not only connects 1 million Internet (IoT) devices within a radius of 1 kilometer, but also has a speed delay of less than 0.001 sec. Steve Mollenkov, chief executive officer of Qualcomm, the world's largest maker of smartphones, said, "5G is a key element and innovative technology that will connect the future." With 5G commercialization, there will be an economic effect of 12 trillion dollars in 2035 and 22 million new jobs We can expect to see the effect of creation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.341-350
• /
• 2003

In this paper, we evaluate the performance of a moving average (MA) channel estimation filter when space-time block coding transmit diversity (STBC-TD) is applied to the wideband direct sequence code division multiple access (WCDMA) forward link. And we present the infinite impulse response (IIR) filter scheme that can reduce the required memory buffer and the channel estimation delay time. This paper also compares the performance between MA filter scheme and IIR filter scheme in various Rayleigh fading channel environments through the bit error rate (BER) and the frame error rate (FER). Extensive computer simulation results show that transmission with STBC-TD provides a significant gain in performance over no transmit diversity technique, particularly at pedestrian speeds. If STBC-TD technique is employed in the channel estimator based on MA filter, it provides considerable performance gains against Rayleigh fading and reduces the optimum filter tap number. Consequently, the channel estimation delay time and the complexity of the receiver are reduced. In addition, the channel estimator based on IIR filter has the advantages such as little memory requirement and no delay time compared to the MA scheme. However, IIR filter coefficients is very sensitive to the mobile speed change and it exerts a serious influence upon the performance. For that reason, it is important to set uP the optimum IIR filter coefficients.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1387-1394
• /
• 2004

Turbo code, a kind of error correction coding technique, has been used in the field of digital mobile communication systems. And it is well known about the fact that turbo code has better the BER performance as the number of decoding iterations increases in the AWGN channel environment. However, as the number of decoding iterations is increased under the several channel environments, any further iteration results in very little improvement, and it requires much delay, computation and power consumption in proportion to the number of decoding iterations. In this paper, it proposes the efficient iterative decoding stop criterion algorithm which can largely reduce the average number of decoding iterations of turbo code. Through simulations, it is verifying that the proposed algorithm can efficiently stop the iterative decoding by using the variance value of error probability for the soft output value, and can largely reduce the average number of decoding iterations without BER performance degradation. As a result of simulation, the average number of decoding iterations for the proposed algorithm is reduced by about 2.25% ~14.31％ and 3.79％ ~14.38% respectively compared to conventional schemes, and power consumption is saved in proportion to the number of decoding iterations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.152-164
• /
• 2015

A rapid development of semiconductors, sensors and mobile network technologies has enable that the embedded device includes high sensitivity sensors, wireless communication modules and a video processing module for vehicular environment, and many researchers have been actively studying the smart car technology combined on the high performance embedded devices. The vehicle is increased as the development of society, and the risk of accidents is increasing gradually. Thus, the advanced driver assistance system providing the vehicular status and the surrounding environment of the vehicle to the driver using various sensor data is actively studied. In this paper, we design and implement the smart vehicular camera device providing the V2X communication and gathering environment information. And we studied the method to create the metadata from a received video data and sensor data using video analysis algorithm. In addition, we invent S-ROI, D-ROI methods that set a region of interest in a video frame to improve calculation performance. We performed the performance evaluation for two ROI methods. As the result, we confirmed the video processing speed that S-ROI is 3.0 times and D-ROI is 4.8 times better than a full frame analysis.