• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.50-56
• /
• 2014

In this paper, we proposed a Ku-band antenna that can be mounted on UAV. A proposed antenna structure has small size and light weight. It is considered long distance communication environment(LOS) and equipped UAV. Proposed antenna is designed $16{\times}2$ aperture coupled microstrip patch array antenna for high gain characteristics. In the measurement results, VSWR is less than 1.5 and the gain is over 21dBi in the bandwidth. Mechanical specifications of antenna assembly are ${\phi}250{\times}200mm$ of size and 3kg of weight.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.876-884
• /
• 2015

In this paper, a switched beamforming antenna system at 28 GHz frequency band is described for $5^{th}$ generation wireless communication. The butler matrix is used as a beamforming system and it produces linear spaced phase difference at four output ports. Array antenna is designed that can be steered in desired 4 different directions 28 GHz frequency band. Operation of designed butler matrix that composed of couplers and feedline is explained. The antenna system is designed in RO3003 substrate that has a height of 5 mil and dielectric constant of 3. The size of butler matrix is $20.3{\times}13.0mm^2$ and size of array antenna is $21.2{\times}19.9mm^2$. This system can be steered from $-34^{\circ}$ to $33^{\circ}$ and minimum sidelobe level is 12.9 dB.

• Journal of electromagnetic engineering and science
• /
• v.14 no.1
• /
• pp.43-45
• /
• 2014

We propose a printed circuit board (PCB)-embedded antenna for millimeter-wave chip-to-chip communication. The antenna is 0.18 mm in height which is 1/20 wavelength at 80 GHz. In order to realize such a low profile, a zeroth-order resonator antenna with a periodic array of four unit cells is employed, and its geometry is optimized to cover an 8-GHz bandwidth from 76 to 84 GHz. With this;the antenna is capable of radiating in a direction parallel to the board length despite the short distance between the ground and the radiator. Simulation and measurement results show that the optimized design has low reflection coefficients and consistent radiation patterns throughout the target bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.913-919
• /
• 2008

A new design and its experimental results of a microstrip-fed ultra-wideband tapered slot antenna(TSA) for millimeter-wave systems are presented. By utilizing the ultra-wideband microstrip-to-CPS transition(balun), ultra-wideband characteristics of the inherent TSA are retrieved. Also, the design procedure of the TSA is simplified by performing simple impedance matching between balun and antenna. The proposed TSA is shaped by using the Fermi-Dirac tapering function and corrugated at the outer edge. The implemented antenna demonstrates ultra-wideband performance for frequency ranges from 23 to over 58 GHz with the relatively high and flat antenna gain of 12 to 14 dBi and low sidelobe levels. In addition, a 4-element linear antenna array for phased-array systems and mm-wave sensor applications is also presented.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.371-374
• /
• 2005

This paper presents the design and fabrication of a cost effective and broad band 8$\times$8 stacked patch array antenna which are backed by a metal cavity operating at 400Hz based on 4 layers LTCC technology. Gain of antenna can be enhanced by using a metal cavity, which can be easily implemented by using LTCC substrates and vias. The broadband performance can be obtained by varying the dimension of patch and the number of layers. Furthermore, to keep the feeding network as smal1 as possible and reduce radiation from feeding network a mirrored patch orientation and embedded micro strip line are adopted, The fabricated antenna is $40\times45\times0.4$ $mm^3$in size. It shows gain 20.4dBi, beam width 10.7deg and impedance bandwidth of l0dE return loss 3.35GHz (40.9$\sim$44.25 GHz), which is about 8% of a center frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2362-2372
• /
• 1996

This paper deals with the design and development of an Injection-Locking Coupled Oscillators(ILCO), which functions like phase-shifter in the Active Intergrated Phased Array Antenna(AIPAA). This linear array 2-element ILCO consists of two Injection Locking Hair-pin Resonator Oscillators(ILHRO) and an unilateral amplifier. The first and second elements of the ILCO have same frequency tuning range but locking bandwidths of 11.5MHz and 14MHz respectively. A phase shift of .DELTA..PHI.=158.4.deg.(-78.0.deg. to 80.4.deg.) could be obtained inthe second element of ILCO when the first elementof the ILCO was in the reference locking mode(.DELTA..PHI.=0.deg.). When the ILCO is applied to the AIPAA, the predicted beam scanning angle value will be 38.4.deg.. Each ILCO gives good frequency stability and lower AM, FM, and PM noise charactheristics in the mutual coupling lockingmode. The ILCO can not only play a part as the phase shifter for the AIPAA but it can also be usedas the power combining device in the mm-wave frequency range and as a part of a T/R MMIC module.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1402-1409
• /
• 2008

In this paper, a low temperature co-fired ceramic cavity backed antenna in order to improve the performances of radiation and bandwidth for the antenna with high relative dielectric constant is proposed. Low temperature co-fired ceramic cavity consisted of several ground planes with closely spaced metallic vias connected. It is shown that the size of a low temperature co-fired ceramic cavity has the effects on the performances of radiation and bandwidth for the antenna. The proposed 2x4 low temperature co-fired ceramic cavity backed antenna is $10{\times}20\;mm^2$ in size. Measured results show antenna gain of $11.8{\sim}14.1\;dBi$ and bandwidth of 13 %(7.9 GHz) in the $57{\sim}64\;GHz$ band.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.11-17
• /
• 2017

In this paper, an 8-direction switched beamforming antenna system at 28GHz frequency band is described for 5th generation wireless communication. This system is composed of an $8{\times}8$ Butler matrix and an 8-element patch array antenna. The antenna system switches beams in 8-direction in the wide range of ${\pm}40^{\circ}$. The antenna spacing is $0.65{\lambda}$ to achieve ${\pm}40^{\circ}$ steering range. Designed results show that the 8-direction beams are placed at ${\pm}6^{\circ}$, ${\pm}17^{\circ}$, ${\pm}28^{\circ}$, ${\pm}40^{\circ}$ offset from the center. Parasitic radiation effect from the large dimension Butler matrix need to be suppressed by employing a stripline structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.386-391
• /
• 2006

In this paper, a design of V-type Linearly Tapered Slot Antenna(V-LTSA) with uniplanar microstrip-to-coplanar stripline(CPS) transitions is presented. The effect of reducing and increasing with taper width G, teper length L and opening angle are also considered at 5.8 GHz. In the result of a simulation by using CST-MWS, the return loss characteristic came very wide band about 4.3GHz, or 1.8 Octave. Proposed V-LTSA design schemes are expected to be a good antenna for microwave and millimeter-wave communcations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.67-73
• /
• 2010

In this paper, the effect of a finite substrate on the mutual coupling of a pair of microstrip patch antennas along the H -plane is investigated. The mutual coupling of a pair of microstrip patch antennas can be reduced using the interference effect due to the phase difference by a variety of routes of the surface wave. In the case of the substrate with $\varepsilon_r$=10 and thickness of 3.2 mm, the mutual coupling is reduced by 4.85 dB on the substrate size with the strong mutual coupling, while the mutual coupling is reduced by 34.28 dB on the substrate size with the weak mutual coupling when the distance between the antenna centers is varied from 0.5 $\lambda_0$ to 1.0 $\lambda_0$. In the case of optimization substrate size, the decreasing rate of the mutual coupling with the increase of the distance between the antenna centers is very large. Good agreements between the image method and full wave simulation results are obtained.