• 한국생활과학회지
• /
• 제19권6호
• /
• pp.1063-1070
• /
• 2010

This study examined 12 types of towels with differing fabric material, function, quality, printing, pile length, twist, etc. from a towel company which manufactures and distributes products domestically. After 3 months of use by consumers, a consumer satisfaction survey was administered and results analyzed. Four types of towels were assigned to each group and the towels were used every day for 3 months. Participant feelings after using the towel for the first time and after using it for three months were investigated. The questionnaire consisted of 26 questions on a 5-point Licket-type scale. The first 13 questions measured perceptions of absorption, touch, fine fiber loss, contamination, deformation, drying speed, and design. Other questions compared differences between the two towel types in terms of their material, function, quality, printing, pile length, and degree of twisting. Results showed that, with regards to weight, consumers preferred towels between 130~150g and a thickness of around 1.7~1.8mm. The bamboo towel was considered superior to the cotton towel in terms of sense of touch and did not happen linter after washing. The antibacterial towel was considered better than the cotton towel in terms of absorption but in terms of contamination, participants felt the antibacterial towel became dirty more easily than the cotton towel. We thought that it might be influence of the color of towel. Low-quality towels became stiffer and misshapen more easily than higher-quality towels. But the study showed that the consumers did not perceive significant differences in the towels' quality. Printed towels became thinner and their color changed more with washing. The consumers preferred the design of jacquard towels to printed towels. Towels with short piles was happened more linter than the towel with long pile after washing. Non-twisted towel were better than the highly-twisted towel in terms of sense of touch and absorption but the non-twisted towel happened more linter after washing and became dirty more easily.

• 한국응용과학기술학회지
• /
• 제19권1호
• /
• pp.10-18
• /
• 2002

In this study, it should be mentioned that Lipid-LCG can be prepared with the main compound of hydrogenated lecithin in oil-in water emulsion. The results of its physical property and stability are as follows. First, the best suitable compositions of Lipid-LCG are made from 4.0wt% of the hydrogenated lecithin, 4.0wt% of cetostearyl alcohol as emulsifier and gelling agent, 3.0wt% of butylene glycol and 2.0wt% glycerin as moisturizers, 3.0wt% of cyclomethicone, 3.0wt% of isononyl-isononanoate, 3.0wt% of capric/caprylic triglycerides, 3.0wt% of macadamia oil as emollients. Second, As the optimum conditions to form Lipid-LCG, which figured out 6.0 ${\pm}$ 1.0 for pH level, 32kg/mm, min for hardness to make a .essence to be formed the ternary phase of liquid crystal(multi-lamellar type). Third, as the analytical result of this system, it obtained that particle size is $1{\sim}8{\mu}m$ level, and is certified with it at 400 and 1,000 magnifications by microscope. The stability of Lipid-LCG is very stable on condition of a low temperature ($4^{\circ}C$), a room temperature ($25^{\circ}C$) and a high temperature ($40^{\circ}C$), which is not to be split in for a long time(for 3-month). We produced our own moisturizing essence, which has a good affinity to skin by means of this system.

• 식물분류학회지
• /
• 제41권3호
• /
• pp.235-241
• /
• 2011

Five unrecorded species (Oedipodium griffithianum, Myurella tenerrima, Trachypus bicolor, Coscinodon humilis, Meteorium miquelianum subsp. atrovariegatum) with one unrecorded family and two unrecorded genera, were reported as new to the Korean moss flora. The monotypic family Oedipodiaceae consisting of a single genus and single species was distinguished from Splachnaceae by small plants that were 10 mm in length simple or sometimes branched, obovate-spathulate to ${\pm}$ orbicular, costa ending below the apex and entire margins except for the lower long-ciliate portion The species was first found at the top of the Mt. Seorak at an altitude of 1708 m. The two genera, Myurella and Coscinodon were found in the Korean Peninsula. Myurella tenerrima (Theliaceae) was found around the top of Jung-bong on Mt. Jiri. It was mixed with other mosses in the crevices of rocks in the alpine regions. The species is similar to M. sibirica, yet it can be distinguished by the position of papilla in the median laminal cells. Coscinodon humilis (Grimmiaceae) were found on the ridge of Mt. Gaya. C. humilis has a variety of hyaline apex according to leaf position and forms a capsule so it can be distinguished by family. Trachypus bicolor and Meteorium miquelianum subsp. atrovariegatum are unrecorded species. T. bicolor (Trachypodaceae) were found on the ridge of Mt. Gaya. T. bicolor is similar to T. humilis but distinguished by the costal lengths of the leaves. M. miquelianum subsp. atrovariegatum (Meteoriaceae) was found in Gageo-do. This species was distinguished by the plant form and morphology of stem leaves in the same genus.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.156-161
• /
• 2002

It depends on the joint configuration, dimensions and constraints on the joint whether the residual stress at the root of single-sided butt weld is tensile or not. Therefore, recommendation is generally made that high R ratio should be used in the fatigue test of this type of joint in order to prevent excessively long life caused by compressive residual stress. in this research, the residual stress profile in butt weld joint was obtained through compliance method, using successive extension of a slot and measurement of the variation of strain during the slot extension. The residual stress profile was firstly assumed to be the linear summation of Legendre polynomials up to 9th order excluding 0th and 1st order. Strain variation on the surface was measured while the slot was being extended by cutting to find out the 8 unknown coefficients of each polynomial tenn. The cut was made by the electric discharge machine. It was concluded that the residual stress near the surface stayed positive, however, it turned into the negative value as soon as it passed through 2 or 3 mm depth. Several fatigue tests were also carried out under zero stress ratio. Test results showed that fatigue life coincides well with the design cuive of butt joint in British Standards, which supports that it is tensile residual stress that exists near the weld root.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.561-569
• /
• 2002

Laser has been called a "Quantum Machine" because of its mechanism of generation since the development on July 7,1960.by T.H.Maiman. We can now use this machine as a tool for manufacturing in industries. At present, 45kW CO2 laser, 10kW Nd:YAG laser, 6kW LD pumped YAG laser and 4kW direct diode laser facilities are available for welding a heavy steel plate of 40mm in thickness and for cutting metals at high speed of 140m/min. Laser Materials Processing is no longer a scientific curiosity but a modern tool in industries. Lasers in manufacturing sector are currently used in welding, cutting, drilling, cladding, marking, cleaning, micro-machining and forming. Recently, high power laser diode, 10kW LD pumped YAG laser, 700W fiber laser and excimer laser have been developed in the industrialized countries. As a result of large numbers of research and developments, the modem laser materials processing has been realized and used in all kinds of industries now. In the present paper, metallurgical studies on laser materials processing such as porosity formation, hot cracking and the joint performances of steels and aluminum alloys and dissimilar joint are discussed after the introduction of laser facilities and laser applications in industries such as automotive industry, electronics industry, and steel making industry. The wave towards the use of laser materials processing and its penetration into many industries has started in many countries now. Especially, development of high power/quality diode laser will be accelerate the introduction of this magnificent tool, because of the high efficiency of about 50%, long life time and compact.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.136-138
• /
• 2006

Recently a lots of problems have observed in high densified and high integrated electronic components. One of them is ion migration phenomena, which induce the electrical short of electrical circuit. Ion migration phenomena has been observed in the field of exposing the specific environment and using for a long time. Also as the RoHS restriction was started in July 1st, 2006, Pb-free solder was utilized in electronics assemblies. In this case, it is very important to compatible between components and printed circuit board(PCB), thus surface treatment materials of PCB was changed to Sn, Sn-3.0Ag-0.5Cu, Cu. Therefore these new application become to need to reevaluate the sensitivity about electrochemical ion migration. This study was evaluated the occurrence time of electrochemical ion migration using by water drop test. We utilized PCB(printed circuit board) having a comb pattern as follows 0.1, 0.318, 0.5, 1.0 mm pattern distance. Sn-3.0Ag-0.5Cu and Sn-37Pb were electroplated on the comb pattern. 6.5V and 15.0V were applied in the comb pattern and then we measured the electrical short time causing by occurring the ion migration. In these results, we evaluate the sensitivity and derived the prediction models of ion migration occurrence time depending on the pattern materials, applied voltage and pattern spacing of PCB conductor.

• 한국광학회지
• /
• 제8권2호
• /
• pp.149-153
• /
• 1997

InGaAsP/InP 격자도움형 방향성 결합기(GACC)필터를 제작하고, 필터의 도파로 구조에 대해서 중심파장, 파장대역폭, TE/TM 편광의존성 그리고 파장가변특성 등을 측정하였다. 필터가 좁은 파장대역폭을 갖도록 도파로의 구조를 설계하였다. 균일한 두께와 폭을 갖는 도파로를 제작하기 위해 reactive ion etching 방법을 이용하였다. 제작된 InGaAsP/InP GACC 필터의 출력 스펙트럼은 TM편광에서 1494.0 nm의 중심파장과 1.3 mn의 파장대역폭을 가졌고, TE편광에서는 1530.6 nm의 중심파장과 1.5 nm의 파장대역폭을 보였다. 이 파장대역폭은 지금까지 보고된 1.5mu.m파장대역 부근에서 GACC필터가 갖는 대역폭 중 가장 좁은 것이다. 또한 100 mA의 전류인가에 대한 8 nm정도의 중심파장 이동을 관찰하였다. 그리고 제작된 여러 가지 도파로 구조에 대해 측정한 GACC필터의 동작특성과 계산한 결과가 잘 일치함을 보였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제42권2호
• /
• pp.67-71
• /
• 2015

Objective: Elevated serum progesterone (P) levels on triggering day have been known to affect the pregnancy rate of in vitro fertilization (IVF). This study aimed to identify the possible factors influencing serum P levels on triggering day in stimulated IVF cycles. Methods: Three hundred and thirty consecutive fresh IVF cycles were included in the study. All cycles were first attempts and were performed in a single infertility center. The indications for IVF were male factor infertility (n=114), ovulatory infertility (n=84), endometriosis (n=61), tubal infertility (n=59), unexplained infertility (n=41), and uterine factor infertility (n=39). A luteal long protocol of a gonadotropin-releasing hormone (GnRH) agonist (n=184) or a GnRH antagonist protocol (n=146) was used for pituitary suppression. Ovarian sensitivity was defined as the serum estradiol level on triggering day per 500 IU of administered gonadotropins (OS[a]) or the retrieved oocyte number per 500 IU of administered gonadotropins (OS[b]). Results: Univariate analysis revealed that the serum P level on triggering day was associated with the serum estradiol level on triggering day (r=0.379, p<0.001), the number of follicles ${\geq}14mm$ (r=0.247, p<0.001), the number of retrieved oocytes (r=0.384, p<0.001), and ovarian sensitivity (OS[a]: r=0.245, p<0.001; OS[b]: r=0.170, p=0.002). The woman's age, body mass index, antral follicle count, and basal serum follicle stimulating hormone and estradiol levels were not associated with serum P level on triggering day. The serum P level on triggering day did not show significant variation depending on the type or cause of infertility, pituitary suppression protocol, or the type of gonadotropins used. Conclusion: The serum P level on triggering day was closely related to the response to ovarian stimulation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권3호
• /
• pp.40-48
• /
• 2013

Cryoablation device is a surgical instrument to produce the cooling effect to destroy detrimental biological tissue by utilizing low temperature around 110 K. Usually, this device has the concentrated cooling region, so that it is suitable for concentrated and thick target. Accordingly, it is hard to apply this device for the target which is distributed and thin target. In this study, the design procedure of a closed-loop cryoablation device with multiple J-T expansion part is developed for the treatment of incompetent of great saphenous vein. The developed cyoablation device is designed with the analysis of 1-dimensional (1-D) bio-heat equation. The energy balance is considered to determine the minimum mass flow rate of refrigerant for consecutive flow boiling to develop the uniform cooling temperature. Azeotropic mixed refrigerant R410A and zeotropic mixed refrigerant (MR) of R22 ($CHClF_2$) and R23 ($CHF_3$) are utilized as operating fluids of the developed cryoablation device to form the sufficient temperature and to verify the quality of the inside of cryoablation probe. The experimental results of R410A and the zeotropic MR show the temperature non-uniformity over the range are $244.8K{\pm}2.7K$ and $239.8K{\pm}4.7K$ respectively. The experimental results demonstrate that the probe experiences the consecutive flow boiling over the target range of 200 mm.

• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1213-1226
• /
• 2013

$PM_{10}$ concentration is related to the meteorological variables including to local and synoptic meteorology. In this study the $PM_{10}$ concentrations of Busan in 2007~2011 were analyzed and the days of yellow sand or rainfall which is more than 5 mm were excluded. The sections of $PM_{10}$ concentration were divided according to 10-quantiles, quartiles and 90-quantiles. The 90-quantiles of daily $PM_{10}$ concentration were selected as high concentration dates. In the high concentration dates the daily mean averaged cloudness, mean daily surface wind speed, daily mean surface pressure and PBL height were low and diurnal variation of surface pressure and daily maximum surface temperature were high. When the high $PM_{10}$ dates occurred, the west and south wind blew on the ground and the west wind blew strongly on the 850 hPa. So it seemed that long range transboundary air pollutants made effects on the high concentration dates. The cluster analysis using Hysplit model which is the backward trajectory was made on the high concentration dates. As a result, 3 clusters were extracted and on the short range transboundary cluster the daily mean relative humidity and cloudness were high and PBL height was low.