• 에너지공학
• /
• 제24권1호
• /
• pp.114-122
• /
• 2015

수평 성층류 2상 유동에서 기체의 속도가 액체의 속도보다 상대적으로 큰 고유속 유동조건에서는 불규칙한 파형들이 생성되고 이때 상 경계면에서는 액적이탈이 발생한다. 한국원자력연구원(KAERI)에서는 이러한 상 경계면에서의 액적이탈 현상을 기구학적으로 예측하기 위하여 전단력, 표면장력, 그리고 중력 항으로 구성되는 새로운 액적이탈 모델을 제시하였다. 그러나 이 액적이탈 모델 내부에는 아직 결정되지 않은 모델 계수가 존재한다. 모델 계수를 결정하기 위해서는 두 상 사이의 계면파 특성과 관련되는 물리변수들에 대한 실험데이터의 확보가 필요하다. 주요 물리변수들에는 파의 기울기, 파의 빗변길이, 파의 속도, 파의 주파수, 그리고 파장이 있다. 본 연구에서는 계면파 특성과 관련된 주요 물리변수들을 측정하기 위하여 폭 40 mm, 높이 50 mm, 길이 4.2 m의 수평사각유로에서 가시화실험을 수행하였다. 실험은 1기압의 물-공기 성층류 유동에서 액적이탈이 발생되는 조건에서 수행되었다. 본 실험에서 계면 형상을 2차원적으로 가시화하고 계면파에서 국소적인 물속도 분포를 측정하기 위하여 유로 측면에서 PIV기법을 적용하였다. 추가적으로, 가시화실험을 통해 획득한 계면 이미지로부터 측정된 계면 높이를 검증하기 위하여 평행 와이어 전도도 센서를 개발하였다. 가시화방법과 센서를 통해 측정된 수위를 비교한 결과, 두 가지 방법론에 의해 측정된 수위결과가 잘 일치함을 확인하였다. 최종적으로 개발된 측정기법을 적용하여 액적이탈 조건에서 계면파 특성과 관련된 주요 물리변수들을 측정하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2961-2966
• /
• 2007

When the pressure at the weak spot established at a certain part of a high pressure vessel or piping system exceeds a design pressure, this weak spot is burst, and the pressurized gas emitted through the weak spot will cause a compression wave system. In this connection, in the present study, an experimental study by using a conventional shock tube facility is performed to estimate the effects of the material of diaphragm, curvature radius and thickness of materials on the valve opening time in diaphragm. Pressure sensor having 500kHz in natural frequency is installed at 35mm downstream of the rupture diaphragm to measure the static pressure history of propagating and being accumulated compression wave. 4 kinds of materials are used as diaphragm that is aluminium, copper, stainless steel and zinc. The diaphragm radii of curvature R are ${\infty}$, 120mm and 60, respectively. And the depth for $90^{\circ}$ groove is 0.04mm. It is found that the smaller the tensile strength and elongation of the rupture diaphragm is, the smaller the radius of curvature of the rupture diaphragm is, and for the same conditions the thinner the thickness of the rupture diaphragm is, the shorter the valve opening time becomes. Also, the tensile strength, elongation and the radius of curvature of the rupture diaphragm for the same conditions are smaller, the maximum pressure rise caused by the coalescences of the compression wave is smaller. Finally the pressure ratio is higher, the valve opening time is shortened and gradient of pressure increment is more steepen.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1463-1466
• /
• 2007

Visco-elastic damping material for reducing heavy-weight floor impact noise and vibration in reinforced concrete structures was tested according to its thickness in the damping layer. The effect of damping material was compared with 20, 15, 10 and 5mm thickness. The wave propagation characteristics was measured for suggestion of an efficient method to reduce the floor impact noise. The method was proposed using the flexural wave propagation characteristics. The result showed that reduction of the thickness of damping layer made a slight difference; the natural frequency moved to higher frequency and the amplitude increased at low frequencies with 5mm thickness of damping material.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.833-836
• /
• 1999

In this paper, a wideband MMIC LNA was designed using low Q matching network. Gains of 9.8~12.2 ㏈, and noise figures of 1.7~2.1 ㏈ were obtained from the fabricated wideband MMIC LNA in the frequency ranges of 1.5~2.5㎓. And maximum output power of 10.83 ㏈m were obtained at the center frequency of 2 ㎓. The chip size of the fabricated wideband MMIC low noise amplifier is 1.4 mm$\times$1.4 mm.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1992년도 정기총회 및 추계학술발표회
• /
• pp.2-29
• /
• 1992

According to the increase of occupation density of microwave frequency band on use microwave environments have been congested extensively. For shielding unnecessary electromagnetic wave of preventing the electromagnetic wave reflection a good conductor a low resistive material or a lossy material is mainly used. As a method to measure the absorbing characteristics of microwave absorber the fundamental microwave measuring method can be used. There is however a big problem in measuring errors since the wavelength of microwave is very short especially as in the case as microwave absorber for RADAR. Therefore this research aimed to a converting adaptor of 20mm${\Phi}$ coaxial tube from a Type-N connector to 20mm${\Phi}$ coaxial tube and to use it for designing microwave absorber and evaluating absorbing characteristics. Furthermore the measurements of absorbing characteristics and material constants have performed and reviewed which were carried out by using the coaxial tube in the short type and by using rectangular waveguide respectively As a result the validity of the measured values have been confirmed.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.184-187
• /
• 2005

In this paper, the transducer instead of mechanical dynamic structure was used to generate ultrasonic wave and the horn-shape amplifier was utilized to solve the energy decaying problem of ultrasonic wave with propagating it through the media. The analyses of ultrasonic wave and a fluid for the selected structure of a cleaning head were carried out Based on simulator results, the distance between a horn and the substrate of 4 mm and the horn diameter of 10 mm were determined to maximize the energy of ultrasonic waves. The cool ins structure was also considered to reduce the heat from the transducer and the horn.

• 전기전자학회논문지
• /
• 제16권2호
• /
• pp.127-130
• /
• 2012

In this paper, we reported on a single balanced monolithic diode mixer using Marchand balun for millimeter-wave applications. The single balanced monolithic mixer was fabricated using drain-source-connected pseudomorphic high electron mobility transistor (PHEMT) diodes considering the PHEMT MMIC full process. The average conversion loss is 16 dB in the RF frequency range of 81~86 GHz at LO frequency of 75 GHz with LO power of 10 dBm. The RF-to-LO isolation characteristics are greater than -30 dB and the total chip size is $1.0mm{\times}1.35mm$.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.73-82
• /
• 1995

Black locust trees(Robinia pseudo-acacia L.) are growing widely in Korea and have been used to get honey and animal feed, but they have seldom been used as manufacturing materials. This study was carried out to evaluate the possibility of using black locust as bent-wood furniture materials. Softening methods were steaming and micro-wave heating. The specimens of 15${\times}$15${\times}$350mm were all air-dried. For softening, specimens were steamed at 100$^{\circ}C$ for 7 min, or microwave heated for 35 seconds. It is known that microwave heating softens wood much faster than steaming. The bending processing conditions are showed in Table 7. The minimum solid-bending radii of black locust were 40mm for steaming and 150mm for micro-wave heating, respectively. In conclusion the steamed black locust, showed very good solid bending properties, but the bending properties of micro-wave heated black locust were not sufficient for bent-wood furniture.

• 한국농공학회논문집
• /
• 제60권1호
• /
• pp.59-65
• /
• 2018

The object of this paper was to analyze combined load acting on agricultural reservoir. This study was carried out to 3-D numerical modeling for displacement characteristic and seismic acceleration characteristic. The results of study were analyzed and summarized as follow. It was found that the displacement caused by combined load acting on railway and agricultural reservoir did not reflect the effect of load and the seismic wave consistently. The ground accelerations that occur in railway and dam were amplified because 3-D numerical analysis program interprets ground as an elastic body. Actual ground shows characteristics of elasticity and plasticity, so measured values will show different tendency. As a result of analyzing displacement characteristics, it is considered to be related to stiffness. The Ofunato seismic wave, the displacement (77.1 mm) of the body satisfied the allowable displacement (220 mm), but The Hachinohe seismic wave (282.8 mm) did not. It is considered that displacement caused by combined load is affected not only by acceleration but also by characteristics of materials.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권3호
• /
• pp.779-800
• /
• 2024

Unmanned Aerial Vehicle (UAV) networks, also known as drone networks, have gained significant attention for their potential in various applications, including communication. UAV networks for communication involve using a fleet of drones to establish wireless connectivity and provide communication services in areas where traditional infrastructure is lacking or disrupted. UAV communication networks need to be highly secured to ensure the technology's security and the users' safety. The proposed survey provides a comprehensive overview of the current state-of-the-art UAV network security solutions. In this paper, we analyze the existing literature on UAV security and identify the various types of attacks and the underlying vulnerabilities they exploit. Detailed mitigation techniques and countermeasures for the protection of UAVs are described in this paper. The survey focuses on the implementation of novel technologies like Q-learning, blockchain, IRS, and mmWave. This paper discusses network simulation tools that range in complexity, features, and programming capabilities. Finally, future research directions and challenges are highlighted.