• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.141-147
• /
• 2005

The development of automobile, vessel, rail road, and machine industry leads an increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 700,000 tons a year, but most WFS has been buried itself and only $5{\~}6\%$ WFS is recycled as construction materials. Therefore, it is necessary for most WFS to research other ways which can be used in a higher value added product. The study on recycling it as a fine aggregate for concrete or green sand has been in progress in America and Japan since 1970s and 1980s respaectively. In this study, two types of WFS were used as a fine aggregate for concrete. Nine types of concrete aimed at the specified strength of 30 MPa were mixed with washed seashore coarse sand in which salt was removed, and WFS and then appropriate mixture proportion of concrete was determined. Moreover, basic properties such as air contents, setting time, bleeding, workability and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

• 대한세포병리학회지
• /
• 제14권2호
• /
• pp.96-101
• /
• 2003

Synovial sarcoma is a rare soft tissue tumor accounting for 5-10% of soft tissue sarcomas. Most arise in the extremities and trunk, and a small proportion occur in the abdominal wall, head and neck legion, and mediastinum. It manifests different phenotypic subtypes that render their cytologic evaluation challenging. Moreover, cytomorphologic description of the epithelial component of synovial sarcoma is rare in Korea. We report a case of biphasic synovial sarcoma on the right lower extremity in a 49-year-old woman diagnosed by fine needle aspiration cytology. The aspirate was moderately cellular and composed of a mixture of tissue fragments and dissociated cells with bland chromatin, inconspicuous nucleoli, and oval to spindle-shaped cytoplasm. Mitosis was rare. A monolayer sheet of epithelial component was seen. The cells in this monolayer sheet had more abundant distinct cytoplasm, round nuclei, and prominent micronucleoli. Histologic examination showed a biphasic pattern consisting of mostly sarcomatous stroma and a few small glandular areas at the periphery of the tumor.

• 한국농공학회논문집
• /
• 제60권3호
• /
• pp.123-133
• /
• 2018

The purpose of this paper is to propose an experimental method to evaluate the resistance of abrasion about 24 MPa, 27 MPa, and 30 MPa compressive strength. These strength are used in the design and construction of concrete hydraulic structures in Korea. The mixing ratios of the ready mixed concrete strengths were investigated countrywide and set the representative mixture proportion ratios of the nine mixed types of OPC, FA and BFS. After making and curing the test specimens, the underwater abrasion test was performed. ASTM C 1138 International Standard was used to fabricate the test equipment, and the surface abrasion resistance of the specimen was tested using the test equipment. In the case of OPC, the 30% abrasion resistance improvement effect was observed at 72 hours as the water-binder ratio decreased. That was reason the coated cement bond strength of the specimen was strong. In the case of BFS and FA, it was improved by 9.9% and 3.8%, respectively, at 72 hours as the water-binder ratio decreased. It was due to the characteristics of the latent hydraulic and pozzolanic reactions. Generally, the relative abrasion resistance of concrete can be evaluated at 24 hours. However, in case of low strength (under 24 MPa), the surface mortar layer wears much faster at the first 12 hours, so it can be considered to evaluate the relative abrasion loss rate at this point.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.237-244
• /
• 2017

At present, in India, handling of solid waste has become a major challenge for the municipal authorities. Composting of solid waste, especially organic waste, can be one of the solutions to tackle the issue of handling solid waste. The present study is focused on agitated piles composting of flower waste (FW). Five combinations of FW with dry leaves (DL) and cow dung (CD) were prepared to conduct the study. Significant changes were observed due to the addition of bulking agent. The bulking material helps to reduce the production of leachate and also to maintain the aerobic condition within the piles. The reduction of total organic carbon was 21% in FW composting which increased by 36.48% during the composting of FW on addition of DL and CD. On the 120th day of composting, the pH of pile five (70 kg FW + 20 kg CD + 15 kg DL) was 7.33, electrical conductivity 2.77 mS/cm, total organic carbon 26.9%, total nitrogen 2.2%, and C:N ratio was 12. Appropriate proportion of waste mixture played an important role in providing favorable conditions for the microbial transformation of flower waste to stabilized compost. Finally, FW with the combination of CD and DL was found to be successful during pile composting.

• 한국수산과학회지
• /
• 제27권2호
• /
• pp.155-165
• /
• 1994

To evaluate the antioxidant effect of flavonoids and a-tocopherol on purified fish oil(up to $40\%$ of n-3 polyunsaturated fatty acids), lipid peroxidation, and fatty acids content during storage and upon heating were determined. The potential of these compounds for inhibiting and delaying both oxidation and lipoxygenase processes was also evaluated. The oxidation of fish oil was effectively inhibited by flavonoids and a-tocopherol. The antioxidizing effect of these compounds increased in proportion to their concentration. The addition of a-tocopherol and catechin-a-tocopherol mixture were prolonged induction period of lipid oxidation by 3.5 to 4 times. All other flavonoids also shown more than twice the prolonging effect. Lipoxygenase activity was decreased by catechin and a-tocopherol effectively.

• 한국표면공학회지
• /
• 제28권1호
• /
• pp.55-63
• /
• 1995

Alkaline solutions such as $NH_4$OH, choline and TMAH (($CH_3$)$_4$NOH) have been introduced in semiconductor wet processing of silicon wafers to control ionic and particulate impurities following etching in acidic solutions. These chemicals usually mixed with hydrogen peroxide and/or surfactants to control the etch rate of silicon. The highest etch rate was observed in $NH_4$OH solutions at a pH in alkaline solutions. It indicates that the etch rate depends on the content of $OH^{-}$ as well as cations of alkaline solutions. STM/AFM techniques were used to characterize the effect of alkaline solutions on silicon surface roughness. In SC1 (mixture of $NH_4$OH : $H_2$$O_2$ : $H_2$O) solutions, the reduction of the ammonium hydroxide proportion from 1 to 0.1 decreased the surface roughness ($R_{rms}$) from 6.4 to $0.8\AA$. The addition of $H_2$$O_2$ and surfactants to choline and TMAH reduced the values of $R_{p-v}$ and $R_{rms}$ significantly. $H_2$$_O2$ and surfactants added in alkaline solutions passivate bare silicon surfaces by the oxidation and adsorption, respectively. The passivation of surfaces in alkaline solutions resulted in lower etch rate of silicon thereby provided smoother surfaces.s.ces.s.

• 동아시아식생활학회지
• /
• 제27권2호
• /
• pp.159-167
• /
• 2017

In this study, quality characteristics of yakju fermented with byeo-nuruk prepared using rice, wheat, and water were investigated. Five different mixture ratios were considered for byeo-nuruk preparation. A comparative analysis of commercial yakju and byeo-nuruk yakju was also performed. The results showed no significant differences in pH, total acidity, and total soluble solids of byeo-nuruk yakju immediately following fermentation. The byeo-nuruk yakju alcohol content increased with increasing wheat proportion. Lactic and succinic acid were the major organic acids of byeo-nuruk yakju, and the major volatile components were isoamyl alcohol and linalool. Yakju prepared using material D had the highest volatile component content and high preference evaluation scores for taste and overall acceptability. Compared to commercial yakju, byeo-nuruk yakju had less total acidity, soluble solids, and volatile acids, whereas its pH level and amino acid content were higher. No significant differences were observed between commercial yakju and byeo-nuruk yakju in terms of sensory evaluation.

• 농업과학연구
• /
• 제41권2호
• /
• pp.141-147
• /
• 2014

Diacylglycerol-oil (DAG oil) and four kinds of fatty acids [C16:0, C18:0, perillar oil-hydrolyzate(C18:3, 59.7%) and docosahexaenoic acid(DHA, C22:6, 63.7%)] were enzymatically esterified with 1:0.5, 1:1 and 1:1.5 molar ratio (DAG oil: fatty acids) to produce structured DAG. The reaction mixture were catalyzed by addition of sn-1,3 specific Lipozyme RMIM with 10 wt% of total substrates, and reacted for 1, 3, 6 and 24 hr at $62^{\circ}C$ with 220 rpm on the shaking water bath. The produced DAG were analyzed by TLC. In the result, the proportion of each fatty acid [(C16:0, C18:0, perilla oil-hydrolysate(C18:3, 59.7%) and DHA(C22:6, 63.7%)] on DAG products were increased as molar ratios of substrate increased. Among them, DHA showed the least reaction rate in which 24.2 % of DHA was found in the structured DAG molecules after 24 hr reaction with 1:1.5 molar substrate amount ratio.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.725-733
• /
• 2008

A thixotropic grout has been developed for the use of filling a tail void in the shield TBM and as well as various ground voids. The grout developed in this study is a mixture of inorganic substance, cement and some functional additives. Its engineering characteristics was investigated by measuring a viscosity and unconfined compressive strengths. The optimum mix proportion for an effective thixotropic grout was proposed through several repeated laboratory tests. The various physical properties such as thixotropy, unconfined compressive strengths, and durability of the thixotropic grout and the gels produced from the grout were compared with those of the well-known waterglass-type grout such as L.W.. The thixotropic grout developed in the study exhibited an excellent performance for back-filling of tail voids in the shield TBM based on experimental results compared to the existing waterglass grout.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.447-448
• /
• 2009

본 논문에서는 과산화수소($H_2O_2$) 분해 반응을 이용, 이산화망간($MnO_2$) 및 탄산수소나트륨($NaHCO_3$)을 촉매제로 사용하여 콘크리트 기포발생 유도를 극대화 하였다. 또한 기포콘크리트 초경량화를 이루기 위한 최적배합 도출 및 소요강도 확보 등의 다양한 실험을 통해 경량기포콘크리트의 물리적 역학적 특성을 알아보았다. 실험결과 전반적으로 KS F 4039 및 KS F 2459규정에 있는 품질기준에 충분히 만족하는 결과를 보였다.