• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.183-191
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used mixture which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Journal of Animal Environmental Science
• /
• v.11 no.2
• /
• pp.125-134
• /
• 2005

This study was conducted to evaluate changes of microbial population, pepsin digestibility of protein and in vitro digestibility of nutrients of food waste mixture pasteurized and cured using a rotary drum system. A pasteurization process (30 min at $80^{\circ}C$) tended to decrease microbial populations and eliminated (P<0.05) molds in food waste mixture. The subsequent curing process increased (P<0.05) lactic acid bacteria counts which were reduced by the heated pasteurization process. The heated pasteurization process decreased (P<0.05) pepsin digestibility of protein in food waste mixture. In vitro digestibilities of dry matter and organic matter were high in the order of bakery by-product, wheat bran, food waste (=barley bran). These results indicate that food waste mixture pasteurized and cured using a semi-dehydration rotary drum system may be an effective animal feed resource.

• Journal of Global Scholars of Marketing Science
• /
• v.13
• /
• pp.135-158
• /
• 2004

On-line consumers have some visit behavior characteristics when they visit internet-shopping mall between visit-stage and purchase-stage. Therefore, information of on-line consumers have influenced on internet-shopping mall's profitabilities at site manager's perspectives. For examples, Are any on-line consumers continuous visiting under any situations? Or are any on-line consumers purchased on any specific internet-shopping mall? Expecially in this paper, researcher tried to understand visit behavioral characteristics of on-line consumers using two-stage mixture regression analysis. Throughout this process, it could be proposed method, which could be reinforced competitiveness of internet-shopping mall by segmental decision-making method. Additionally, it is expected that visit behavioral characteristics' information could be supplied strategic implications between visit-stage and purchase-stage Throughout empirical test it could be proved two-stage decision-making process, which decision-making process of on-line consumers would be processed visit-stage and purchase-stage. In this study, researcher proposed suitable response strategy after understanding visiting behavioral characteristics of on-line consumers. This paper has some academical contributions, which visit behavioral characteristics of on-line consumers could be grasped the meaning by site stickiness and navigation pattern.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.57-61
• /
• 2003

In the combustion modeling of non-premixed flames, the mixture fraction conserved scalar approach is widely utilized because reactants are mixed at the molecular level before burning and atomic elements are conserved in chemical reactions. In the mixture fraction approach, combustion process is simplified to a mixing problem and the interaction between chemistry and turbulence could be modelled by many sophisticated combustion models including the flamelet model and CMC. However, most of the mixture fraction approach is restricted to one mixture system. In this study, the flamelet model based on the two-feed system is extended to the multiple fuel-feeding systems by the two mixture fraction conserved scalar approach.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.345-348
• /
• 2005

This paper presents the result of adiabetic temperature rise and fundamental properties of concrete combining admixtures. According to results, difference of setting time with I5.5hours is observed between S-P and R-F30 mixture. Based on the adiabetic temperature rise test, 8$^{circ}C$of heat producted occurs between E-P and R-F30 mixture. is applied to estimate the temperature rising under adiabetic curing condition, which exhibits closer consistency with tested value. The function mentioned above can account for the effect of dormant period in hydration process at early stage on hydration heat production. It reveals that the consideration of placing layer based on the mixture adjustment(E-P mixture at top layer and R-F30 mixture at bottom layer) in mass concreting will contribute to reduce hydration heat as well as alleviate tensile stress discrepancy between placing layer.

• Journal of the Korean Society of Combustion
• /
• v.1 no.2
• /
• pp.21-29
• /
• 1996

Flame propagation characteristics of propane-air mixtures were experimentally investigated in constant-volume combustion chambers. Flame propagation process was observed as a function of mixture strength, initial mixture temperature and initial mixture pressure in quiescent mixtures. A cylindrical combustion chamber and a spherical combustion chamber contain a pair of parallel windows through which optical access into the chamber can be provided. Laser two beam deflection method was adopted to measure the local flame propagation, which gave information on the flame size and flame propagation speed. Pressure development was also measured by a piezoelectric pressure transducer to characterize combustion in quiescent mixtures. Burning velocity was calculated from flame propagation and pressure measurements. The effect of flow on flame propagation was also investigated under flowing mixture conditions. Laser two beam method was found to be feasible in measuring flame propagation of quiescent mixtures. Flame was observed to propagate faster with higher initial mixture temperature and lower initial pressure. Combustion duration was shortened in the highly turbulent flowing mixtures.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.120-131
• /
• 1995

Thermodynamic analysis of extraction process from the constant pressure LNG(Liquefied Natural Gas) vessel was performed in this study. LNG was assumed as a binary mixture of 90% methane and 10% ethane by mole fraction. The thermodynamic properties such as temperature, composition, specific volume and the amount of cold energy were predicted during extraction process. Pressure as a parameter ranges from 101.3kPa to 2000kPa. The result shows the peculiar phenomena for the LNG as a mixture. Both vapor and liquid extraction processes were investigated by a computer model. The property changes are negligible in the liquid extraction process. For the vapor extraction process, the temperature in the vessel increases rapidly and the extracted composition of methane decreases rapidly near the end of extracting process. Specific volume of vapor has the maximum and that of liquid has the minimum during the process. When pressure is increased, specific volume of vapor decreases and that of liquid increases. It was found that specific volume of vapor phase had a major effect on the heat absorption at constant pressure during vapor extraction process. If the pressure of the vessel increases, the total cold energy which can be utilized from LNG decreased.

• Journal of Hydrogen and New Energy
• /
• v.20 no.5
• /
• pp.397-403
• /
• 2009

The catalysis of carbon black was investigated for the production of hydrogen by the catalytic decomposition of propane-butane mixture gas in this study. The thermal and the catalytic decompositions of hydrocarbons were performed at the temperature range of 500 - $1100^{\circ}C$, respectively. The conversions of hydrocarbons and the mole traction of hydrogen increased with increasing the reaction temperature and the conversion of hydrocarbons in the catalytic decomposition process was approximately liked with that obtained by the thermal decomposition. However, the mole traction of hydrogen produced in the catalytic decomposition process was higher than that obtained from the thermal decomposition. Therefore, it was concluded that the catalysis for the decomposition of hydrocarbons is occurred over carbon black used as catalyst. The mole traction of hydrogen produced by the catalytic decomposition of hydrocarbons also increased with increasing the mole ratio of $C_3H_8/C_4H_{10}$ in propane and butane mixture gas at $700^{\circ}C$. Therefore, it was concluded that the catalytic decomposition of the high propane mixture gas is more effectively for the production of hydrogen.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.12
• /
• pp.1927-1931
• /
• 2008

In this study, the enzymatic process for biodiesel production was optimized using a mixture of immobilized Rhizopus oryzae and Candida rugosa lipases. The optimal temperature and agitation speed for biodiesel production were $45^{\circ}C$ and 300 rpm, respectively. The optimal ratio of R. oryzae and C. rugosa lipases in the mixture was 3:1 (w:w). When 3 mmol of methanol was the initial reaction medium and 3 mmol of methanol was added every 1.5 h during biodiesel production, biodiesel conversion was over 98% at 4 h. In addition, when the immobilized lipase mixture was reused, biodiesel conversion exceeded 80% after 5 reuses.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.178-185
• /
• 2005

The synergistic effect of ethylene/propane mixture on soot formation is studied experimentally using a concentric co-flow diffusion burner, which provides the stratified fuel mixture. The soot volume fraction, soot particle diameter, number density and PAH concentrations are measured with various fuel supply configurations and compared to the homogeneously mixed case. When propane is supplied through the inner nozzle, an increase of soot formation is observed. However, when propane is supplied through the outer nozzle, a decrease is observed. The reaction path of PAH's formed from the pyrolysis process of propane is likely to be responsible to the observed differences. When propane is supplied through the outer nozzle, PAH's are formed in the relatively near oxidation region and exposed to the oxidization environment; on the other hand, when propane is supplied through the inner nozzle, PAH's are not likely to be oxidized and thus get involved in soot formation process. The synergistic effect in ethylene/propane diffusion flames is found to be affected not only by the com position of the mixture but also by the way of mixing.