• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.410-416
• /
• 2006

For highly efficient operation of a Bunsen process section in an iodine-sulfur thermochemical hydrogen production cycle using nuclear heat, the process characteristics of $H_2SO_4-HI-H_2-O-I_2$ mixture system for separating into two liquid phases ($H_2SO_4$-rich phase and $HI_x$-rich phase) and the distribution of $H_2O$ to each phase were investigated.The experiments for process variables were carried out in the temperature range, from 298 to 353 K, and in the $H_2SO_4/HI/H_2O/I_2$ molar ratio of 1/2/14~20/0.5~8.0. As the results, for the $SO_2-I_2-H_2O$ Bunsen reaction system, the ranges between the starting point and the saturation point for two liquid phases separation were determined by calculation. The best result for the minimization of impurities (HI and $I_2$ in $H_2SO_4$ phase and $H_2SO_4$ in $HI_x$ phase) in each phase was obtained in an optimum condition with the highest temperature of 353 K and the highest $I_2$ molar composition. In this condition, the $HI/H_2SO_4$ molar ratio in the $H_2SO_4$-rich phase and the $H_2SO_4/HI_x$ molar ratio in the $HI_x$-rich phase were 0.024 and 0.028, respectively. For the distribution of $H_2O$ to each phase, it is appeared that the affinity between $HI_x$ and $H_2O$ was more superior to that between $H_2SO_4$ and $H_2O$. The affinity between $HI_x$ and $H_2O$ was decreased with increasing temperature but increased with increasing $I_2$ molar composition.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.715-721
• /
• 2007

Residual calcium concentration is high, in general, at the effluent of the fluoride removal process in the electronics industry manufacturing semiconductor and LCD. To increase the stability of the membrane process incorporated for reuse of wastewater, the residual calcium is required to be pre-removed. Hyperkinetic Vortex Crystallization(HVC) process was installed in the electronics industry manufecturing semi conductor as a pilot scale for accelerating calcification of calcium ion. Compared to the conventional soda ash method, the 31% higher calcium removal efficiency was achieved when HVC was applied at the same sodium carbonate dosage. In order to maintain the economic calcium removal target of 70% preset by manufacturer, the dosing concentration of the soda ash was 530 mg/L based on influent flowrate. The seed concentration in the reactor was one of the critical factors and should be maintained in the range of $800\sim1,200mg$ SS/L to maximize the calcium removal efficiency. The calcite production rate was 0.30 g SS/g $Na_2CO_3$ in the average. The economic HVC passing time of the mixture was in the range of $2\sim5$ times. Relatively, stable calcium concentration was maintained in the range of $30\sim72$ mg/L(average 49 mg/L) although the calcium concentration in the feed was severely fluctuated with $74\sim359$ mg/L(average 173 mg/L). The HVC process was characterized as environment-friendly technology reducing chemical dosage and chemical sludge production and minimizing maintenance cost.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.25-31
• /
• 2007

Characterizing the risk posed by a mixture of chemicals is a challenging task due to the chemical interactions of individual components that may affect their physical behavior and hence alter their exposure to receptors. In this study, cell tests that represent subsurface environment were carried out using benz[a]anthracene (BaA) and p-xylene focusing on phasetransforming interaction to verify increased mobility and risk of highly sorbed pollutants in the presence of less sorbed, mobile liquid pollutants. A transport model was also developed to interpret results and to simulate the same process on a field scale. The experimental results showed that BaA had far greater mobility in the presence of p-xylene than in the absence of that. The main transport mechanisms in the vadose zone were by dissolution to p-xylene or water. The transport model utilizing Defined Time Steps (DTS) was developed and tested with the experimental results. The predicted and observed values showed similar tendency, but the more work is needed in the future study for more precise modeling. The field-scale simulation results showed that transport of BaA to groundwater table was significantly faster in the presence of NAPL, and the oral carcinogenic risk of BaA calculated with the concentration in groundwater was 15${\sim}$87 times larger when mixed with NAPL than when solely contaminated. Since transport rate of PAHs is very slow in the subsurface without NAPL and no degradation of PAHs was considered in this simulation during the transport, the increase of risk in the presence of NAPL is expected to be greater for the actual contaminated site.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.137-145
• /
• 2008

In this study, to reduce the flood damage caused by flood discharge exceeding project flood, the primary technology was applied to determining the optimal location and size for underground sluiceway. The Jungrang Stream was selected for this study because the stream was overflowed and the embankment section of the stream was destroyed owing to localized torrential rainfall in 1998 and 2001. Considering 200-year frequency storm, the inlets of the underground discharge channel were located at Seoul City limits, the confluence of Danghyun Stream, Wolgye 1-gyo, and the confluence of Mukdong Stream. The outlets were located at the estuary of Jungrang Stream and rightbank of Banpo Bridge in Han River. The transverse discharge according to the variation of overflow depth at the inlet of underground discharge channel was estimated and the effect of inundation reduction was analyzed. To examine the appropriate scale of the underground discharge channel, the 8 operation methods for the management of outlet discharge were compared considering four rules (only storage, the constant discharge rate, the constant discharge volume, and the mixture of the constant discharge rate and discharge volume). As a result, the effect of inundation reduction was most significantly improved when the inlet was located at the confluence of Danghyun Stream. The appropriate size of underground sluiceway for 200-year frequency storm was studied, and as a result, the appropriate diameters of the underground discharge channel were 12 m in case of only storage(Rule D), 9m in 50% of discharge(Rule E), 8 m in constant discharge volume(Rule F), and 7 m in mixture method(Rule G). This investigation process can be applied to design the underground discharge channel when the inundation damage is significant in coastal area due to embankment overflow. The underground discharge channel in Jungrang Stream can also be used as an underground road to link Seoul City to Uijeongbu City during dry season.

• Journal of Animal Environmental Science
• /
• v.14 no.2
• /
• pp.119-128
• /
• 2008

This experiment was conducted to investigate the effects of concentrated pig slurry using membrane filter on growth of tomato in nutriculture. Pig slurry was filtered by ultra filtration and concentrated by reverse osmosis process. Filtration of pig slurry was necessary to prevent the hose clogging in nutriculture. The concentrated pig slurry (CS) and nutrient solution (NS) were mixed by six different mixing ratios of 0:100, 20:80, 40:60, 60:40%, 80: 20 and 100%:0% based on nitrogen content. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of tomato. The concentration of nutrient solution was adjusted a range of $1.6{\sim}2.0mS/cm$ in EC. The plant height of tomato treated with CS 20+NS 80% was similar with NS 100% control plot. Plant height was highest in the plot of CS 20+NS 80%. The treatment of 100% concentrated pig slurry was lowest in the gowth characteristics of tomato. Number of cluster was very lower in 100% concentrated pig slurry compared with plot of chemical nutrient solution. In the beginning of growth stage, SPAD reading value was reduced in plot treated with CS 100%, but CS 20+NS 80% plot was higher compared to 100% concentrated pig slurry. SPAD value of tomato leaves was decreased as the amount of CS was increased. The SPAD value also in treatment of concentrated pig slurry was lower in the middle growth stage compared to control plot. The dry weight of stem and leaf were 107.4, 104.2g in plot of NS 100% and CS 20%+NS 80%, respectively. The fruit number and weight were decreased at high application plots of concentrated pig slurry, The fruit setting of tomato showed lowest in the plot treated with 100% concentrated pig slurry, and the growth of tomato severely decreased after application of 100% CS treatment. In conclusion, the growth characteristics such as plant height and fruit weight of tomato were not significantly different between the plots treated with mixture of 20% CS +80%NS and 100% nutrient solution treatment. In conclusion, the mixture solution of 20% of concentrated pig slurry and 80% of nutrient solution could be used as a nutrition solution of tomato nuticulture.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.593-606
• /
• 2003

This study was conducted to develop effective manufacturing methods of a total mixed ration(TMR) composed of broiler litter(BL) and bakery by-product(BB) for ruminants. Five experiments included a small-scaled manufacture of TMR using a deepstacking method(Exp. 1), its pelletization(Exp. 2), its field-scaled manufacture(Exp. 3), a field-scaled manufacture using an ensiling method(Exp. 4), and a mixing process of deepstacked BL and BB prior to feeding(Exp. 5). BL and BB were mixed at a ratio which makes total digestible nutrients of the TMR 69%. For each experiment, temperature, appearance and physico-chemical properties were recorded and analyzed. The chemical composition data revealed that the mixture of BL and BB showed nutritionally additive balance which resulted from a considerable increase(P<0.05) of organic matter and a desirable decrease(P<0.05) of protein and fiber up to the requirement level for growing ‘Hanwoo’ steers. Deepstacking of BL and BB in Exp. 1 and 3 resulted in a sufficient increase of stack temperature for pasteurization, little chemical losses, appearance of white fungi on the surface, and partial charring due to excess stack temperature. For Exp. 2, its pelleting, which was successful using a simple, small-scaled pelletizer, resulted in a little loss(P<0.05) of organic matter and an increase(P<0.05) of indigestible protein(ADF-CP). Ensiling the mixture in Exp. 4 made little effect on chemical composition; however, one month of the ensiling period was not enough for favorable silage parameters. Deepstacking BL alone in Exp. 5 tended(P<0.1) to decrease true protein : NPN ratio and hemicellulose content and increase ADF-CP content due to the heat damage occurred. Deepstacking or ensiling of BL-BB mixtures and simple incorporating of BB into deepstacked BL prior to feeding could be practical and nutrients-preservative methods in TMR manufacture for beef cattle, although ensiling needed further hygienic evaluation.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.374-381
• /
• 2015

Occurrences of coastal dredged materials are ever increasing due to port construction, navigational course maintenance and dredging of polluted coastal sediments. Ocean dumping of the coastal dredged materials has become virtually prohibited as London Treaty will be enacted as of the year 2012. It will be necessary to treat and recycle the dredged materials that may carry organic pollutants and heavy metals in a reasonable and effective process: collection of the dredged materials, liquid and solid separation, and treatment of organic compounds and heavy metals. In this study we have developed a continuous bioreactor system that can treat a mixture of silt and particulate organic matter using a microbial consortium (BM-S-1). The steady-state operation conditions were: pH (7.4-7.5), temperature ($16^{\circ}C$), DO (7.5-7.9), and salt concentration (3.4-3.7%). The treatment efficiencies of SCOD, T-N and T-P of the mixture were 95-96%, 92-99%, and 79-97%. The system was also effective in removal of heavy metals such as Zn, Ni, and Cr. Levels of MLSS during three months operation period were 11,000-19,000 mg/L. Interestingly, there was little sludge generated during this period of operation. The augmented microbial consortium seemed to be quite active in the removal of the organic component (30%) present in the dredged material in association with indigenous bacteria. The dominant phyla in the treatment processes were Proteobacteria and Bacteroidetes while dominant genii were Marinobacterium, Flaviramulus, Formosa, Alteromonadaceae_uc, Flavobacteriaceae_uc. These results will contribute to a development of a successful bioremediation technology for various coastal and river sediments with a high content of organic matter, inorganic nutrients and heavy metals, leading to a successful reuse of the polluted dredged sediments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.2
• /
• pp.181-188
• /
• 1989

The present study has been carried out to investigate the effect of Bactokil(made from didecyldimethyl ammonium chloride isopropanol and water) and Taipet-F (made from natural vitamin E, L-ascorbic acid, glyceride and gallic acid) on retarding lipid oxidation in boiled-dried anchovy. To process boiled-dried anchovy, boiled anchovy dried in cabinet drier $(dry-bulb\;temperature\;40^{\circ}C)$ for 1 hour were fronted with the Bactokil, the Taipet-F and mixture of Bactokil and Taipet-F, respectively. Anchovy fronted with chemicals were redried for 8 hours, packed in polyethylene film bag, and then stored at room temperature $(24{\pm}3^{\circ}C)$. These products were compared with control(untreated with chemicals) during storage. The changes in volatile basic nitrogen of each product was negligible during storage. The thiobarbituric acid and peroxide values of each product increased up to 10 days of storage, and then decreased. In color value of each product, L value increased, while n, b and ${\bigtriangleup}E$ values decreased during storage. The changes in brown pigment formation of each product increased up to final stage of storage. From the results of chemical analysis and sensory evaluation, the product treated with Taipet-F(0.5%, v/v) was the most effective on retarding lipid oxidation of the boiled -dried anchovy, followed by the product treated withthe mixture of Bactokil (0.04%, v/v) and Taipet-F (0.5%, v/v), the product treated with Bactokil(0.04%, v/v) and control, in the order named.

• Journal of Nutrition and Health
• /
• v.3 no.3
• /
• pp.129-135
• /
• 1970

From the previous studies, F-P-4 formula was found to be comparable to full fat dry milk in its nutritive value and feeding performance. However, an attempt was made in order to make sure whether or not any possibility might exist, by which further improvement of nutritive quality and simultaneous reduction of product costs may be achieved. Using F-P-4 as a control, modifications were made in new formulas, F-P-5, F-P-6 and F-P-7 by reducing FPC, eliminating yeast from the mixture, and by enriching with methionine as needed. In particular, F-P-7 is completely free of FPC, hydrogenated oil and yeast. Yet, levels of total protein and fat were kept equal to those of F-P-4 in all formulas. An animal feeding test for all formulas using 10 female rats per group for 8 weeks and an infant feeding trial for F-P-5 and F-P-6 with 5 of each female infants under age of one for one month were conducted along with F-P-4 as a control. Almost the same results were obtained with F-P-4, 5 and 6, but F-P-7 showed the lowest body weight gain. FER of F-P-5 and 6 was 0.20 as was with F-P-4, while that of F-P-7 was 0.16. Acceptability to infants was excellent; growth, appearance and biochemical data were normal. As an example F-P-4 packed in 0.04mm polyethylene bags was used for storage study at $25^{\circ}C$ and relative humidity of $65{\sim}85%$ for 8 months. Although viable bacterial counts and vitamin C contents were reduced, peroxide and TBA values were increased gradually during such storage. Since there are also significant changes in color and organoleptic quality, the expected shelf life under the given conditions is considered to be about 2 months and thus further works are needed both on the product and packaging in order to improve the storage stability. Either elimination of yeast form F-P-4, that is F-P-5, or partial replacement of FPC with methionine, that is F-P-6 may well reduce material costs about 10%. Considering blending process of ingredients, F-P-5 is thus found to be the best formula developed. While F-P-7 free of FPC is inferior in its nutritive quality than that of others, but significantly superior than of rice. Furthermore, the material cost of the product can be reduced about 20% from that of F-P-4. And thus this vegetable blend is considered to be useful as a low cost supplementary food mixture for growing children.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.1-10
• /
• 2014

In this study, two different types of dredged fill injection methods are introduced and filling experiments were conducted to analyze the impact of each technique to the distribution and deposition of dredged soil fill and how it influence the final tube shape. Two transparent plastic tubes were fabricated to observe the deposition behavior of the deposited fill material. Both tubes measured 4.0 meters in length (L) and has vinyl tube diameters (D) of 0.5m and 0.7m. T-type and I-type inlet system are also introduced in this paper. The influence of this inlet systems to the distribution and deposition behavior of dredged soil fill inside the vinyl tubes were observed during the experiment. After the sedimentation of the slurry mixture, the water on top of the soil sediments are removed and the slurry mixture was re-injected into the vinyl tube, this process was carried out repeatedly. The shape changes of the vinyl tube, e.g. the changes in both tube height and width, are constantly monitored after each slurry injection and water draining phases. Crater formation was observed in the case of I-Type inlet system and a non-uniform sediment distribution occurred. For the diffusion deposit of soil particles to long distance are minimal shape technique using the T-Type inlet system. Therefore the undrain filling height ratio ($H/D_0$) was found to be around 0.54 to 0.64 and the horizontal strain ratio ($W/D_0$) ranges from 1.45 to 1.54. The filling soil height is proportional to dredged-material filling phases, but, horizontal strain ratio is constant or inversely reduced so that the center of tube body is raised in the upward direction.