• Journal of the korean Society of Automotive Engineers
• /
• 제15권1호
• /
• pp.28-36
• /
• 1993

Present-day there are two of theories which have considerable scientific support to explain the knock phenomenon in S.I. engine, the detonation theory and the autoignition theory. But they still have some problems to explain effects of knock parameters, i.e.. compression ratio, spark timing, mixture quality, engine speed, ect, on knocking process in S.I. engine. Accordingly, it is essential to find out whish is more adequate theory of two and to develop the method of analyzing knock phenomenon, that is the aim of this paper. The Authors develop the method of predicting transient temperature and pressure at the end-gas zone during the combustion period and analyze knocking process by this method based on the knock theories. The caluculated values based on the autoignition theory show reasonablly correct relations between knock parameters and knock process but there is no evidence of knock occurred by detonation theory through the calculation according to the all parameters. The authors find out that the autoignition theory is more adequate than detonation theory to analyze knocking process in S.I. engine.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2336-2347
• /
• 2018

The azeotrope of methyl acetate methanol and water was isolated using extractive distillation with water as entrainer. The pressure-swing extractive distillation (PSED) process and vapor side-stream distillation column (VSDC) with the rectifier process were designed to separate the methyl acetate, methanol and water mixture. It was revealed that the VSDC with the rectifier process had a reduction in energy consumption than the PSED process. Four control schemes of the two process were investigated: Double temperature control scheme (CS1), $Q_R/F$ feedforward control of reboiler duty scheme for PESD (CS2), $Q_R/F$ feedback control scheme for VSDC (CS3), the feedback control scheme of sensitive plate temperature of side-drawing distillation column to dominate the compressor shaft speed (CS4). Feed flow and composition disturbance were used to evaluate the dynamic performance. As a result, CS4 is a preferable choice for separation of methyl acetate-methanol-water mixture. A control scheme combining the operating parameters of dynamic equipment with the control indicators of static equipment was proposed in this paper. It means using the sensitive plate temperature of side-drawing column to control the compressor shaft speed. This is a new control scheme for extractive distillation.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.732-738
• /
• 2008

Simulated moving bed (SMB) process is a continuous chromatographic technology used to separate a large amount of petrochemicals, fine chemicals, pharmaceuticals, and so on, drawing a great attraction of related industries. With the recent development of biotechnology, the SMB process has been adopted for the separation of various useful bio-products. Attempts to understand the separation mechanism of the SMB process in many aspects are reported in many publications. These researches have dealt with the improvement of SMB for easier operation and solving problem in process. The feed mixture fed into the SMB process may be of different concentration batch by batch rather than in uniform concentration. Retention behaviors of feed (psicose (A) and fructose (B) mixture) existing in the SMB unit in dynamic steady-state and feed (psicose (C) and fructose (D) mixture) newly injected into the SMB were analyzed. It was observed that the existing components, (A) and (B), were eluted relatively faster as the injection time of new feed was earlier during the port-switching period. In addition, the components (C) and (D) were eluted earlier as fresh feed was injected earlier in a port-switching time.

• Journal of Sericultural and Entomological Science
• /
• 제33권1호
• /
• pp.9-12
• /
• 1991

A study on dyeing-rate for single and mixture dyeing of silk with acid dyes was carried out. Single and mixture dyeings were performed with levelling and milling dyes at 7$0^{\circ}C$ and at pH 3, pH 4 and pH 5, respectively. The results of this study were summerized as follows : 1. C. I. Acid Orange 7. A) At pH 3, dyeing-rate was more fast in the single dyeing than in mixture dyeing at the beginning of dyeing process. B) At pH 4 and 5, dyeing-rates tend to get very similar in single and mixture dyeing. 2. C. I. Acid Blue 138 A) At all pH value, dyeing-rates were more fast in the mixture dyeing than single dyeing at the beginning of dyeing. B) As the time increased, the difference of dyeing-rate and adsorption amounts between single and mixture dyeing was not shown.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제24권2호
• /
• pp.238-245
• /
• 2014

Objectives: It was known that workers in synthetic leather company are mainly co-exposed to dimethylformamide(DMF) with methyl ethyl ketone(MEK) or toluene(TOL) instead of a single dimethylformamide. This study was examined to the physico-chemical properties in single DMF and binary mixture DMF with MEK or TOL. Materials: Physico-chemical properties were measured by Korean and American Standard Test Methods. Results: Boiling point, specific gravity and flash point in single DMF were significantly higher than binary mixture DMF with MEK or TOL and such difference was dependent on the mixing ratio of MEK and TOL, and low explosion limit in binary mixture DMF with TOL was only significantly lower than single DMF. However, Reid vapor pressure had significantly higher in binary mixture DMF with MEK or TOL compared with single DMF. Conclusions: Our results demonstrate that the binary mixture DMF with MEK or TOL synergistically increases volatilization of DMF. It was concluded that the interaction between DMF and MEK and/or TOL might play a key role in the volatilization process of DMF under environmental conditions of workplace.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제42권4호
• /
• pp.194-202
• /
• 2019

Reliability analysis of the components frequently starts with the data that manufacturer provides. If enough failure data are collected from the field operations, the reliability should be recomputed and updated on the basis of the field failure data. However, when the failure time record for a component contains only a few observations, all statistical methodologies are limited. In this case, where the failure records for multiple number of identical components are available, a valid alternative is combining all the data from each component into one data set with enough sample size and utilizing the useful information in the censored data. The ROK Navy has been operating multiple Patrol Killer Guided missiles (PKGs) for several years. The Korea Multi-Function Control Console (KMFCC) is one of key components in PKG combat system. The maintenance record for the KMFCC contains less than ten failure observations and a censored datum. This paper proposes a Bayesian approach with a Dirichlet mixture model to estimate failure time density for KMFCC. Trends test for each component record indicated that null hypothesis, that failure occurrence is renewal process, is not rejected. Since the KMFCCs have been functioning under different operating environment, the failure time distribution may be a composition of a number of unknown distributions, i.e. a mixture distribution, rather than a single distribution. The Dirichlet mixture model was coded as probabilistic programming in Python using PyMC3. Then Markov Chain Monte Carlo (MCMC) sampling technique employed in PyMC3 probabilistically estimated the parameters' posterior distribution through the Dirichlet mixture model. The simulation results revealed that the mixture models provide superior fits to the combined data set over single models.

• Journal of Korean Society of Water and Wastewater
• /
• 제21권5호
• /
• pp.641-647
• /
• 2007

This study aims to find out optimum condition for hydrogen production and organic removal when treating food and swine wastewater together. For this purpose, various batch tests were conducted by changing mixture ratio from 6:4 (food wastewater:swine wastewater) to 1:9 without pretreatment process. For hydrogen production through anaerobic fermentation, the mixture ratios of R-1 (6:4), R-2 (5:5) and R-6 (1:9) were out of pH range appropriate for hydrogen production and mixture ratios of R-3 (4:6), R-4 (3:7), and R-5(2:8) showed appropriate hydrogen production where their pH ranges were 5.1~5.5. Especially in case of R-3, it consistently maintained appropriate pH range for hydrogen production for 72hr and produced maximum hydrogen. The characteristics of hydrogen production and cumulative hydrogen production according to each mixture ratio showed that R-1, R-2 and R-6 did not produce any hydrogen, and maximum hydrogen productions of R-3, R-4 and R-5 were 593ml, 419ml and 90ml, respectively. Total cumulative hydrogen productions of R-3, R-4 and R-5 were 1690ml, 425ml and 96ml, respectively. Based on previous results, it was concluded that, the most appropriate mixture ratio of food wastewater and swine wastewate rwas 4:6 (R-3). The experiment for COD removal rate to evaluate organic removal efficiency revealed that R-3, R-4 and R-5 showed high removal efficiencies during the highest hydrogen production amount and the highest efficiency was 41% with R-3.

• Journal of Korea Water Resources Association
• /
• 제52권11호
• /
• pp.895-904
• /
• 2019

It has been well recognized that extreme rainfall process often features a nonstationary behavior, which may not be effectively modeled within a stationary frequency modeling framework. Moreover, extreme rainfall events are often described by a two (or more)-component mixture distribution which can be attributed to the distinct rainfall patterns associated with summer monsoons and tropical cyclones. In this perspective, this study explores a Mixture Distribution based Nonstationary Frequency (MDNF) model in a changing rainfall patterns within a Bayesian framework. Subsequently, the MDNF model can effectively account for the time-varying moments (e.g. location parameter) of the Gumbel distribution in a two (or more)-component mixture distribution. The performance of the MDNF model was evaluated by various statistical measures, compared with frequency model based on both stationary and nonstationary mixture distributions. A comparison of the results highlighted that the MDNF model substantially improved the overall performance, confirming the assumption that the extreme rainfall patterns might have a distinct nonstationarity.

• Journal of Energy Engineering
• /
• 제23권3호
• /
• pp.1-6
• /
• 2014

The more or less homogeneous fuel-air mixture that exists at the end of the compression process is ignited by an electric ignition spark from a spark plug shortly before top dead center. The actual moment of ignition is an optimization parameter; it is adapted to the engine operation so that an optimum combustion process is obtained. Brake mean effective pressure (BMEP) of the spark ignition energy control device (IECD) than conventional spark system at the stoichiometric mixture is increased about 9%. For lean burn engine, the lean limit is extended about 25% by using the IECD. It was considered the stability of combustion by the increase of flame kernel according to the high ignition energy supplies in initial period and discharge energy period lengthen by using the IECD.

• Journal of Power System Engineering
• /
• 제21권3호
• /
• pp.12-18
• /
• 2017

Diesel and gasoline engines will be used as main power system of automobiles. Recently, engine downsizing is widely applied to both gasoline and diesel engines in order to improve fuel economy and exhaust emissions. Engine downsizing means small engine combustion chamber with higher combustion pressure. Therefore, spray and combustion process should be investigated under these high pressure and temperature conditions. In this study, constant volume combustion chamber which enables easy optical access from six directions was developed. Combustion chamber was designed to resist maximum pressure of 15 MPa and maximum temperature of 2,000 K. Combustible pre-mixed mixture was introduced into combustion chamber and ignited by spark plugs. High pressure and temperature were implemented by combustion of pre-mixed mixture. Three initial conditions of different pressure and density were tested. High repeatability of combustion process was implemented which was proven by low standard deviation of combustion pressure.