• 대한기계학회논문집B
• /
• 제38권11호
• /
• pp.899-905
• /
• 2014

본 연구는 고효율 청정 조리용기 개발을 위한 기초 연구로서 기-액 상변화를 이용하여 조리용기의 등온성을 향상시키고자 $100-200^{\circ}C$의 작동온도 범위에 적합한 작동유체를 선정하고 이들 작동유체의 열전달 특성실험을 수행하였다. 이를 위하여 2 상 밀폐 열사이폰을 제작하고 두 가지 작동유체에 대한 비등 및 응축 열전달 특성과 시동특성에 대한 실험하였으며, 실험 결과로부터 2 가지 유체를 혼합한 2 성분 유체 열사이폰의 시동 및 열전달 성능의 상호 보완 가능성을 분석하였다.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.723-731
• /
• 2000

유해유기화합물질 처리시 처리효율을 증대시키기 위하여, 본 연구에서는 GAC를 이용한 RSTA에서 phenol과 4-nitrophenol 의 경쟁흡착을 연구하였다. 이성분계 흡착등온시 phenol은 Freundlich 흡착동온식 적용이 불가능하였다. 그리고 활성탄 주입량이 적어짐에 따라 또 흡착질의 농도가 증가함에 따라 두 성분간의 경쟁흡착은 심화되었다. RSTA를 이용한 연속식 실힘에서는 유입유량이 감소할수록 두 성분간의 경쟁흡착성향은 증가하는 것으로 나타났다. 수축 각 변화에 따른 경쟁흡착실험에서는 수축각이 커질수록 파과시간이 증가하였으며, 활성탄 충전층 수를 변화시킨 실험에서는 충전층 수를 증가시킴에 따라 각 성분의 흡착효율 및 phenol에 대한 4-nitrophenol 경쟁흡착능은 증가하였다. RSTA에서의 이러한 성능 증대는 유체의 정제와 분리에 적용할 수 있을 것이다.

• Journal of Pharmaceutical Investigation
• /
• 제23권3호
• /
• pp.179-186
• /
• 1993

In vitro dissolution test and pharmacokinetic study in human volunteers were conducted to evaluate the pharmacokinetic characteristics of 150 mg furbiprofen sustained-release capsule (FPSR-150). As a reference product, 50 mg flurbiprofen conventional-release capsule (FPCR-50) was used. Dissolution tests of two products were run using the paddle method in 450 : 540 (v/v %) mixture of simulated gastric and intestinal fluids (K.P. VI) by adjusting medium pH according to time. FPCR-50 was dissolved very rapidly, and it took about 1.5 hr for FPCR-50 to be dissolved over 90%, whereas 15 hr for FPSR-150. Also, in pharmacokinetic study, ten healthy male volunteers were administered one capsule of FPSR-150 or two capsules of FPCR-50 (FPCR-l00) with randomized two period cross-over study. Significant differences between FPCR-l00 and FPSR-150 were found in mean times to reach peak concentration, mean resident times and mean terminal phase halflives, while not in AUC/Dose (Student's t-test). In ANOVA for AUC/Dose to compare the bioavailabilities of two FP products, there was no significant difference. From the comparison of the simulated steady-state plasma concentration-time curves following multiple medications of FPCR-50 (3 capsules a day, dosing interval=8 hrs) and FPSR-150 (1 capsule a day) based on the above results obtained from single doses of two FP products, it was noted that the medication of FPSR-150 is more useful in clinical application rather than FPCR-50.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.44-44
• /
• 2003

Growth mechanism of carbon nanotubes(CNTs) synthesized by chemical vapor deposition is abided by two growth modes. These growth modes are classified by the position of activated catalytic metal particle in the CNTs. Growth mode can be also affected by interaction between substrate and catalytic metal and induced energy such as thermal and plasma. We studied the reaction of catalytic metal to the substrate and growth mode of CNTs. Various substrates such as Si(100), graphite plate, coming glass, sapphire and AAO membrane are used to study the relation between catalytic metal and substrate in the synthesis of CNTs. For catalytic metal, thin film was deposited on various substrate via sputtering technique with a thickness of ∼20nm and magnetic fluids with none-sized particles were dispersed on AAO membrane. After laying process on AAO membrane, it was dried at 80$^{\circ}C$ for 8 hour. Synthesizing of CNTs was carried out at 900$^{\circ}C$ in NH3/C2H2 mixture gases flow for 10minutes.

• 한국산업보건학회지
• /
• 제16권2호
• /
• pp.91-100
• /
• 2006

The purpose of this study was to validate alternative method by using non-carcinogenic, and less toxic solvents than NIOSH analytical method 5524 for measuring the airborne MWFs in workplaces. In laboratory tests, the ETM solvents(mixture of same volume for ethyl ether, toluene, and ethanol) were selected. The alternative method of analyzing MWFs, referred to as the ETM solvent extraction method, showed 0.04 mg/sample as LOD, and 0.15 mg/sample as LOQ. The analytical precision (pooled CV, coefficient of variation) of the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was 1.5%, 2.0%, 2.6%, 1.6%, respectively, which was similar to the precision (2.6%) of NIOSH analytical method (NIOSH 0500) for total dust. The analytical accuracy by recovery test, spiked mass calculated as extractable mass, was almost 100%. As the result of storage stability test, metalworking fluid samples should be stored in refrigerated condition, and be analyzed in two weeks after sampling. The 95% confidence limit of the estimated total standard error for the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was ${\pm}12.6%$, ${\pm}12.5%$, ${\pm}14.0%$, and ${\pm}13.6%$, respectively, which satisfied the OSHA sampling and analytical criteria.

• KSBB Journal
• /
• 제27권4호
• /
• pp.207-214
• /
• 2012

Emulsions are mixture of immiscible liquids in which one is dispersed in all over the other. They have been applied to many applications including cosmetics, foods, drug delivery system (DDS), fine chemicals, and chemical separations. Especially, emulsion technology is one of the most useful technique to formulate cosmetics such as eye cream, foundation, and foam cleansing. In general, the emulsions can be generated by mechanical agitation of two immiscible fluids. However, the emulsions obtained by conventional method have limited in stability, monodispersity, and complicate process. We describe here preparation techniques of representative cosmetic emulsions such as liposome, liquid crystal emulsion, nanoemulsion, multiple emulsion, and pickering emulsion. Furthermore, various factors which can control the physical properties of each cosmetic emulsions are briefly discussed.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.153-156
• /
• 2010

나노유체로 기공이 채워진 규사와 같은 2상 물질의 고온에서의 유효 열전도도를 비정상열침법을 사용하여 측정하였다. 본 연구의 나노유체는 물과 0.1% 체적률의 입경이 45 nm 인 알루미나 나노입자의 혼합유체이다. 본 연구의 측정방법은 액체가 모래의 미세한 기공 내에 존재하므로, 열전도도의 측정에서의 액체의 대류에 의한 문제가 적다. 본 연구의 모래에 대한 예측모델을 사용하여 나노유체와 모래입자의 2상 물질의 유효 열전도도의 측정결과로부터, 고온의 나노유체의 열전도도를 결정하였다. 실험결과, $30^{\circ}C\sim80^{\circ}C$의 온도 범위에서 순수한 물에 대한 본 연구의 나노유체의 열전도도의 증가율은 4.87% ~ 5.48% 의 범위에서 변화하는 것으로 나타났다.