• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.790-796
• /
• 2011

This study was designed to investigate the influence of ratio of anionic/nonionic surfactant mixture on detergency of particulate soil under various solutions. The detergency of the particulate soil was determined by adhesion of particle to fabric and its removal from fabric separately. The PET fabric and ${\alpha}-Fe_2O_3$were used as materials of textile and model of particulate soil, respectively. The detergency was investigated as a function of surfactants concentration, ionic strength, kinds of electrolyte and mole numbers of oxyethylene ether of nonionic surfactant in different ratio of anionic/nonionic surfactant mixture. Although some deviations exist, the adhesion of particle to fabric generally increased with decreasing its removal from fabric. The detergency of particulate soil on PET fabric was relatively higher in anionic/nonionic surfactant mixed solution than in each single surfactant solution, but the influence of ratio of anionic/nonionic surfactant mixture on detergency of particulate soil was low. Generally the detergency of particulate soil on fabric was at its maximum at 0.1% surfactant concentration, $1{\times}10^{-3}$ ionic strength, $Na_5P_3O_{10}$ electrolytes and 10 mole numbers of oxyethylene ether of nonionic surfactant, regardless of ratio of anionic/nonionic surfactant mixture.

• 한국염색가공학회지
• /
• 제11권4호
• /
• pp.31-38
• /
• 1999

The purpose of this study is to develop multifunctional fabric that has improved antimicrobial activity and reduction rate of gas by treatment of mixture of chito colla and crosslinking material for polyester. The surface morphology of treated PET fabric was studied by scanning electron microscopy(SEM). The properties of the PET fabric, such as antimicrobial activity, whiteness, moisture regain, water absorption and static voltage, and handle were investigated. Antimicrobial activity of treated PET fabric was proved 99%. The surface of treated PET fabric showed harshness and irregularity. The whiteness of treated PET fabric on the baking condition was decreased as time and temperature was increased. The moisure regain of treated PET fabric equally was maintained. Water absorption and static voltage of treated PET fabric were improved. KOSHI of treated PET fabric was increased compared with the untreated PET fabric H/W of treated PET fabric was improved compared with the untreated PET fabric and 2HB/B of treated PET fabric were reduced.

• 한국농공학회논문집
• /
• 제62권4호
• /
• pp.23-31
• /
• 2020

Recently, meteorological disasters have been increasing by climate change, excessive rainfall, and landslide. The purpose is to develop new fabric concrete that can prevent and recover from damages because some of areas are vulnerable to meteorological disaster. Specifically, this technology can minimize time and space constraint when repairing the concrete structure and installing a formwork. The structure of fabric concrete is a mixture of fabric concrete and a high-speed hardened cement, Silica sand, wollastonite mineral fiber, fabric material and waterproof PVC fabric. In this study, the ratio of mechanical properties and durability of the fabric concrete mixture was evaluated by deriving the binder: silica sand mix ratio of the fabric concrete mixture and substituting part of the cement amount with wollastonite mineral fiber. Best binder in performance evaluation: Silica sand mix ratio is 6: 4 and the target mechanical performance and durability are the best when over 15% wollastonite binder is replaced by silicate mineral fiber.

• 한국의류산업학회지
• /
• 제7권4호
• /
• pp.445-451
• /
• 2005

Up to the present, fabric finishing methods have been mainly employed for the application of chitosan. However, the coated chitosan acid salt is prone to be detached from the fabric during the laundering process. In order to improve the wash fastness, chitosan treated fabrics are being subjected to thermal curing. In this study, chemical crosslinking reaction by epichlorohydrin was introduced to improve the problem of the thermal curing. An improvement of the wash fastness is expected since the coated chitosan component on the fabric become insoluble by the introduction of the crosslinking. The demerit of the single chitosan treatment (inferior handle due to the excessive stiffness, etc.) was supplemented by the application of chitosan-polyurethane mixture solution. The mixture ratios were adjusted to 1 : 0, 1 : 0.25, 1 : 0.5, 1 : 1, and 1 : 2 for the chitosan/PU mixture. Physical and mechanical properties of the finished fabric specimens were measured using the Kawabata Evaluation System(KES), and hand values were calculated accordingly based on the translational formulas.

• 한국의류학회지
• /
• 제37권7호
• /
• pp.962-971
• /
• 2013

We compared the effectiveness of amidase (amano acylase, AA) and an endopeptidase, (trypsin, TR) in modifying the hydrophobicity of polyamide fabric. We evaluated the number of amino groups released into the reaction mixture in order to optimize the treatment conditions. We found that a large number of amino groups were released into the reaction mixture due to the cleavage of amide bonds by AA hydrolysis; however, the TR hydrolysis exhibited a relatively lower activity compared to AA hydrolysis. In AA and TR hydrolysis, significant differences were observed in the K/S values and moisture regain. Amide bonds in polyamide fabric were hydrolyzed by AA hydrolysis effectively. Compared to TR, AA formed more hydrolysis product (amino groups) on the fabric surface. Thus, the hydrophobicity of polyamide fabric was modified using AA hydrolysis (as verified by the wettability test) without any deterioration of fiber strength.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.997-1007
• /
• 2005

The textile finishing methods utilizing chitosan have been mostly focused on the applications in the improvement of the dyeing of cotton fabrics, or the improvement of hand of the cotton or wool fabrics. On the other hand, it Is difficult to find the application examples in the synthetic fiber fabrics including polyester and nylon fabrics. The aim of this study is to improve the stiffness and the poor wash fastness of the fabrics treated only with chitosan. We tried to improve the softness by employing chitosan and polyurethane mixture solution and to prevent the detachment of the chitosan from the fabric. The treatment was applied to cotton, polyester, and nylon fabrics. The change of the properties of the treated fabrics were investigated. The optimum finishing condition was sought by changing the mixture ratio of the chitosan/PU(polyurethane) solutions. The adjusted ratios of the chitosan/PU solutions were 1 : 0, 1 : 0.25, 1 : 0.5, and 1 : 2 during the mixture solution preparation. Using the KES(Kawabata Evaluation System), the physical and mechanical properties of the finished fabric specimens were analyzed, and hand values of the specimens were calculated through the use of translational formulas. According to the chemical composition of the fibers, chitosan solution or chitosan/PU mixture exhibited wide range of coating effect. Since the chitosan acid solution has high polarity, the bonding force with the cotton fibers is high. By the appropriate addition of PU in the chitosan treatment of cotton, KOSHI and HARI values of the fabric improved. The air permeability of the chitosan/PU treated cotton fabric specimen improved, resulting in the highest value at the mixture of chitosan : PU=1:0.25.

• 한국의류학회지
• /
• 제32권4호
• /
• pp.651-658
• /
• 2008

Conjoint analysis estimates how much each of the attributes is valued on the basis of the choices consumers make among product concepts that are varied in systematic ways. The purposes of this research were to evaluate the relative importance of each fabric constituent characteristic for the consumer's utility or preference, to compare with the relative importance between the trained and the untrained panelists, and to identify the combinations of the constituent characteristic of knit fabric which offer consumers greater utility. Conjoint analysis was conducted using data taken from 54 trained and 54 untrained panelists, who rated preference for 12 different knit fabrics. The stitch length had a greater effect on knit fabric preference than the mixture ratio of fiber. There was no difference on effect of knit constituent characteristics for preference between the trained and the untrained panelists. Total, trained and untrained group preferred a knit fabric that had a higher acrylic mixture ratio and a short stitch length.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.63-68
• /
• 2008

The hand of the sensitive mixture fabrics was analysed and discussed with measured mechanical properties of two kinds of woven fabrics according to the characteristics of air-jet loom. The 16 mechanical properties such as tensile, bending, shear, compression and surface were measured using KES-FB system and their differences of the mechanical properties between domestic and foreign looms were analysed with the deviation according to the position of the specimen. And also these mechanical properties according to the domestic and Japan air-jet looms were analysed and discussed with warp and weft insertion tensions during weaving. This research is aiming to make a data base of fabric mechanical properties and, these analysed data are given to weaver as a basic research data related to the effects of loom characteristics to the sensitive mixture fabrics required from weaving fields.

• 복식
• /
• 제57권10호
• /
• pp.24-34
• /
• 2007

The purpose of this study is to examine the pieces of 100 fabrics excavated from unknown woman's tomb Incheon, by analyzing woven methods, names of the fabrics, the kinds and the shapes of the patterns. The characteristics to assume the period of the fabrics are as follows. The geumsundan which was woven peacock insignia at chest and back area was excavated for the first time from the tomb of Joseon. Peacock insignia woven with satin weave using supplementary golden wefts, wrapped gold thread. These kind of fabrics were usually imported in the $15^{th}$ century, according to the old documents, 'Nogeoldae' 'Joseonwangjosilrok' written at the end of Goryeo or early in Joseon. Thus, these relics are from about $15^{th}$ century. From this tomb, the mixture fabric of cotton and ramie are excavated. According to another excavated cases, the mixture fabric of cotton and ramie appears from the period before the Japanese Invasion of Korea in 1592, and after the invasion, there are usually mixture fabric of cotton and silk. This also tells that these fabrics show the characteristics of those from the early period of Joseon Dynasty. The rounded patterns of Jangot is only shown from the fabrics of late Goryeo Dynasty, and the cloud pattern of an upper garment with a squared neckline is shown from the early Joseon Dynasty. So, the patterns from these excavated costumes are ranged from the late Goryeo Dynasty to the early Joseon Dynasty. To assume the period through the overall study above, these relics show the characteristics of the $15^{th}$ century fabric.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.55-66
• /
• 1998

In order to investigate the detergency effects of various detergents to stained polyester & cotton fabric with solid soils such as carbon black, liquid paraffin and fat, the optimum washing conditions according to the types of washing agent, the assesment of detergency effect by the measurement of reflectance after and before washing were studied. The detergency effect of various detergents to stained polyester and cotton fabric increased by using the mixtures of bleaching and enzyme detergent. In order to obtain the excellent detergency effect, 2-step treatment, the pre-washing with bleaching agent and bleaching-enzyme mixture detergent treatment is preferred. In comparison of the detergency to polyester and cotton fabric, it is assumed that the detergency to polyester stained fabric was superior than that to cotton stained fabric because of the difference of adhesive force between soil material and fabric in preparing solid stained fabric.