• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.436-443
• /
• 2001

In order to investigate the mixing of dissimilar grades during the arbitrary grade transition in bloom caster, a computational model has been developed. The model is fully transient and consists of two sub models, which account for mixing in the bloom tundish, mixing in the strand. The developed model was verified using concentration histories measured on 1 : 1 scale bloom tundish water model. The result of numerical model showed good agreement with the experimental results of water model. By using this numerical model, the mixing of dissimilar grades in bloom caster has been simulated. As that result, the characteristics of the steel mixing in the bloom tundish and strand was showed and the amount of the intermixed grade bloom was predicted.

• 상하수도학회지
• /
• 제18권2호
• /
• pp.128-136
• /
• 2004

The overall objective of this research was to find out the role of rapid mixing conditions in the species of hydrolyzed Al(III) formed by different Al(III) coagulants. When an Al(III) salt is added to water, monomers, polymers, or solid precipitates may form. Different Al(III) coagulants (alum and PACl) show to have different Al species distribution over a rapid mixing condition. During the rapid mixing period, for alum, formation of dissolved Al(III) (monomer and polymer) increases, but for PACl, precipitates of $Al(OH)_{3(s)}$. increases rapidly. Also, for alum, higher mixing speed favoured Al(III) polymers formation over precipitates of $Al(OH)_{3(s)}$ but for PACl, higher mixing speed formed more precipitates of $Al(OH)_{3(s)}$. At A/D and sweep condition, both $Al(OH)_{3(s)}$ and dissolved Al(III) (monomer and polymer) exist, concurrent reactions by both mechanism appear to cause simultaneous precipitation.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.958-967
• /
• 2006

The overall objective of this research was to find out the role of rapid mixing conditions in the species of hydrolyzed Al(III) formed by Al(III) coagulants and to evaluate the distribution of hydrolyzed Al(III) species by coagulant dose and coagulation pH. When an Al(III) salt was added to water, monomers, polymers and solid precipitates may form. Different Al(III) coagulants (alum and PSOM) show to have different Al(III) species distribution over a rapid mixing condition. During the rapid mixing period, for alum, formation of dissolved AI(III) (monomer and polymer) increases, but for PSOM, precipitates of $Al(OH)_{3(S)}$ increases rapidly. During the rapid mixing period, for high coagulant dose, Al-ferron reaction increases rapidly. The kinetic constants, Ka and Kb, derived from AI-ferron reaction. The kinetic constants followed very well the defined tendencies for coagulation condition. For pure water, when the rapid mixing time increased, the kinetic constants, Ka and Kb showed lower values. Also, for raw water, when the rapid mixing time increased, the kinetic constants, Ka and Kb showed lower values. At A/D(Adsorption and Destabilization) and sweep condition, both $Al(OH)_{3(S)}$ and dissolved Al(III) (monomer and polymer) exist, concurrent reactions by both mechanism appear to cause simultaneous precipitation.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.924-925
• /
• 2005

• 한국해양환경ㆍ에너지학회지
• /
• 제12권4호
• /
• pp.227-234
• /
• 2009

강에서 유출된 담수가 연안지역에 영향을 미치는 영역을 결정하는 요인 중 하나인 담수풍선의 특성을 비정규격자계를 사용하는 유한체적모델(FVCOM)을 이용하여 연구하였다. 강에서 바다로 유출된 담수는 하류 쪽(강에서 바다를 보면서 오른쪽)으로 이동하는 연안경계류와 강 하구에서 반시계방향으로 회전하며 시간이 지남에 따라 커지는 와류형태의 담수풍선(bulge)을 만든다. 이 담수풍선의 중심에서 수직운동이 유도되어 담수가 해저면 까지 이동한다. 조석을 고려하면 담수풍선이 사라지고, 연안경계류의 폭이 넓어진다. 간단한 염분비교방법을 이용하여 조석에 의한 성층 및 혼합의 변화를 비교하여 조석이 연직혼합을 강화시킴을 정량적으로 평가하였다. 담수가 방출되기 시작한 초기에는 조석에 의한 왕복운동에 의해 조석이 고려된 경우에 수평혼합이 더 크게 나타나나, 일정시간이 지나면 수직혼합에 의해 하구역의 염분이 낮아져 있어, 강 하구에서 담수의 왕복운동이 전체적인 수평 확산계수에 미치는 영향이 작아진다. 조석이 없는 경우 연직혼합 없이 주로 표층에서만 관성불안정에 의해 수평 확산/혼합이 이루어져 수평 확산계수가 시간이 지남에 따라 계속 증가한다.

• Journal of the korean society of oceanography
• /
• 제32권1호
• /
• pp.17-27
• /
• 1997

Miami Isopycnic Coordinate Ocean Model is applied to the East Sea to estimate the renewal time of the upper Intermediate Water The model gives about 10 years of renewal time. Extrapolating this result to the whole water mass below, including the upper Intermediate Water, leads to about 81.4 years of renewal time, which is quite comparable to that obtained by Kim and Kim (1997) based on the recent observations. Deep winter mixing occurs in the north of the basin. The areas of the largest water mass conversion, from the upper mixed to the intermediate below, are along the periphery of the deep mixing zone. Large portion of the renewed Intermediate Water then advects along the Korean and Japanese coasts. It is concluded that the high-oxygen content Intermediate Water found off the Korean coast (Kim and Chung, 1984) is in part locally formed but mostly advected from the deep mixing zone.

• 한국환경과학회지
• /
• 제3권3호
• /
• pp.229-239
• /
• 1994

북태평양에 위치한 일본근애의 수괴분포에 대한 특성을 중층수에 중점을 두어 일본 해상 기상청이 관측한 정이 해양관측정선에서 얻어진 자료를 사용하여 검토하였다. 쿠로시오해역의 T-S도상에서 분산은 비교적 작게 나타나고 있다. 쿠로시오해역에서 고온, 고염분층에서부터 저온, 저염분측으로 이동하고 있다. 혼합해역에서 수형의 분한은 북으로 이동함에 따라 고염분측의 이동보다 저온, 저염분측으로 급격히 증가하고 있다. 염분극소층에서 해수의 써모스테릭 아노말리(thermosteric anomaly)는 해양관측정선이 북에서 남으로 이동함에 따라 감소하고 있다. 이러한 사실은 해수가 염분극소층을 따라 남하하는 것이 아니고, 염분극소층이 두 해수의 수직적인 경계임을 제시하고 있다. 여기서 오야시오수와 쿠로시오수의 두 전형적인 수괴를 정의하고 있따. 염분극소층보다 깊은 부분의 T-S도는 전형적인 오야시오수와 쿠로시오수가 같은 양으로 혼합하는데 대해, 염분극소층보다 상층에서는 전혀 다름 양상을 나타내고 있다. 염분극소층 해수의 써모스테릭 아노말리가 북에서 남으로 이동함에 따라 뚜렷이 감소해 간다. 이러한 사실은 왜 염분극소층에서 써모스테릭 아니말리의 값이 북에서 남쪽으로 이동함에 따라 감소하는지를 설명해 주고 있다.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.26-31
• /
• 1997

Abstract A series of permeability tests was performed on the mixtures with specific mixing rates of sand and bentonite using modified rigid-wall permeameter. Sand-bentonite mixtures were permeated by organics, ethanol and TCE. Permeability of bentonite with several mixing rates had a tendency to decrease up to initial one pore volume and permeability was thereafter converged to a constant value. When sand-bentonite mixtures was permeated by water, permeability was decreased at the beginning but it was thereafter converged to a constant. Among several mixing rates, permeability was greatly decreased at 15% of mixing rate. When sand-bentonite mixtures with 15% mixing rate was permeated by ethanol, permeability was about 10 times larger value than permeability of water. Peameability was shown greater values when permeated by TCE (TrichloroEthylene) followed by ethanol. Suitable mixing rate of sand-bentonite for a liner of waste landfills was detected.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.32-43
• /
• 1997

Abstract A series of permeability tests was performed on the mixtures with specific mixing rates of sand and bentonite using modified rigid-wall permeameter. Sand-bentonite mixtures were permeated by organics, ethanol and TCE. Permeability of bentonite with several mixing rates had a tendency to decrease up to initial one pore volume and permeability was thereafter converged to a constant value. When sand-bentonite mixtures was permeated by water, permeability was decreased at the beginning but it was thereafter converged to a constant. Among several mixing rates, permeability was greatly decreased at 15% of mixing rate. When sand-bentonite mixtures with 15% mixing rate was permeated by ethanol, permeability was about 10 times larger value than permeability of water. Peameability was shown greater values when permeated by TCE (TrichloroEthylene) followed by ethanol. Suitable mixing rate of sand-bentonite for a liner of waste landfills was detected.

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.210-217
• /
• 2011

In results of accomplishing fundamental study to improve the flocculant-mixing of the Flash-Mixer in Onsan Water-Treatment Plant at the small cost, We obtained 8.9% of mixing-efficiency from the field data and 3.2% of the characteristic flow-ratio as the available maximum volume-ratio in this Water-Treatment Plant. The optimum elements with the deflector diameter of 400 mm and deflector angle of $145^{\circ}$ at the flow ratio of 3.2% could be obtained from the expanded study on the ground of the fundamental study. Finally, the efficiency could be improved about 510% from 8.9% to 45.4% and the average turbidity could be improved about 14%.