Yaqian Zong;Kai Zhou;Xinhui Duan;Bo Han;Hua Jiang;Chenggang He
Animal Bioscience
/
제36권12호
/
pp.1842-1852
/
2023
Objective: Hairy vetch is considered to improve the nutritional value of corn because of its high protein and mineral levels. To better understand the mechanism underlying hairy vetch regulated whole-plant corn silage fermentation, this experiment investigated the fermentation quality and bacterial community of whole-plant corn and hairy vetch mixture. Methods: Whole-plant corn and hairy vetch were mixed at ratios of 10:0 (Mix 10:0), 8:2 (Mix 8:2), 6:4 (Mix 6:4), 4:6 (Mix 4:6), 2:8 (Mix 2:8), and 0:10 (Mix 0:10) on a fresh weight basis. After ensiling 60 days, samples were collected to examine the fermentation dynamics, ensiling characteristics, and bacterial communities. Results: Mix 0:10, Mix 2:8, and Mix 4:6 showed poor fermentation characteristics. Mix 8:2 and Mix 6:4 silages showed high quality, based on the low pH, acetic acid, and ammonia nitrogen levels and the high lactic acid, crude protein, and crude fat contents. The bacterial diversity was affected by the mixing ratio of the two forage species. The genus Lactobacillus dominated the bacterial community in Mix 10:0 silage, whereas with the addition of hairy vetch, the relative abundance of unclassified-Enterobacter increased from 7.67% to 41.84%, and the abundance of Lactobacillus decreased from 50.66% to 13.76%. Conclusion: The silage quality of whole-plant corn can be improved with inclusion levels of hairy vetch from 20% to 40%.
Commercial gas stoves feed primary air to the burner and burn the fuel-air mixture in a partially premixed combustion. This mechanism produces carbon monoxide during combustion. In this study, design parameters of a commercial gas stove were optimized by considering the carbon monoxide emission. Gas consumption rate, carbon monoxide emission, and water boiling temperature as a heating performance were determined. Carbon monoxide emission was measured using a Korean Industrial Standards standard collector. Water boiling temperature was measured by first soaking the pot in water for approximately 10 min and then heating the pot filled with water. A thermocouple was installed inside the pot. Carbon monoxide increased as the nozzle diameter was increased and the burner-pot height was decreased. This result was due to the insufficient mixing between the fuel and air. Heating performance was enhanced when the nozzle diameter was increased and the burner-pot height was decreased. However, the heating performance deteriorated when the nozzle diameter was 1.8 mm and the burner-pot height was reduced to 50 mm. This phenomenon was due to the formation of a flame on the side of the pot. A merit factor was defined to find the optimal design parameters to satisfy gas consumption rate, carbon monoxide emission, and heating performance. Optimal design values were established to be a nozzle diameter of 1.5 mm and a burner-pot height of 60 mm.
비소와 납 함유량이 높은 인대광산 지역에 분포하는 여러 폐광석 적치장으로부터 유출된 침출수와 광산배수에 영향을 받은 수계에서 미량원소, pH 및 산화환원전위차의 계절적 및 공간적인 변화가 관찰되었다. 채광활동이 약 40년전이었고 폐광석 적치장이 유실되었기 때문에 이 수계는 심각하게 오염된 상태이었다. 침출수와 광산배수의 유입으로 인하여 수계 상류구간의 지표수는 비교적 약 산성 및 강한 산화환경 특성이 있으며, 아연(최대 $5.830mg/{\ell}$), 구리(최대 $1.333mp/{\ell}$), 카드뮴(최대 $0.031mg/{\ell}$) 및 황산염(최대 $173mg/{\ell}$) 함량의 계절적 및 공간적인 변화가 큰 특징이 있었다. 침출수에서 가장 함량이 높은 원소의 순서로 나열하면 아연($0.045-13.909mg/{\ell}$), 철($0.017-8.730mg/{\ell}$), 구리($0.010-4.154mg/{\ell}$) 및 카드뮴($n.d.-0.077mg/{\ell}$)이며, pH는 낮으며 황산염 함량(최대 $310mp/{\ell}$)은 높았다. 광산배수도 아연, 구리, 카드뮴 및 황산염 함량이 높았으며, pH는 연중 중성으로 일정하게 유지되었다. 침출수와 광산배수가 단기적인 수계 유량의 변동에 영향을 줄 수 없을 지라도 수계의 화학원소 함량에 강한 영향을 주었다. 수계 내 철(수)산화광물이 풍부하다는 것과 화학적 특성은 철(수)산화광물의 침전이 이 수계의 지표수로부터 미량원소를 제거하는 데 중요한 역할을 하고 있음을 지시하였다. 이 수계의 하류 구간에서의 공간적 및 계절적인 변화는 오염되지 않은 지류로부터 유입되는 지표수에 의해 크게 기인하였다. 또한, 이 구간에서의 미량원소의 함량은 어떠한 인위적인 처리 없이도 광산배수와 침출수가 배출되는 지점으로부터 가까운 거리에서 지류와 수리학적으로 혼합되어진 후 배경값과 거의 유사한 함량으로 낮아졌다. 비보존성 반응(즉 침전, 흡착, 산화, 용해 등)과 보존성 반응(예: 수리학적 혼합)은 미량원소가 강으로 이동되는 것을 크게 감소시키는 효과적인 자연저감 기작이었다.
광촉매인 나노크기의 산화아연(ZnO)과 흡착기능의 지지체인 Laponite, 결합제인 poly vinyl alcohol (PVA)를 혼합하여 붕산(boric acid)과 가교반응(crosslinking)을 통해 흡착과 광분해가 동시에 발생하며 회수가 불필요한 nano-ZnO/Laponite/PVA (ZLP) 광촉매 흡착볼을 개발하였다. ZLP 광촉매 흡착볼 제작을 위한 최적의 배합비는 Nano-ZnO:Laponite:PVA:deionized water의 구성비가 3:1:1:16 (by weight)으로 도출되었으며, PVA가 붕산과의 가교결합을 통해서 다층의 망(mesh network)과 막(film)을 형성하여 Laponite의 팽윤과 ZnO의 탈리 현상을 억제하는 것으로 사료된다. 수중안정성을 개선하고 비표면적을 높이기 위한 최적의 건조방법은 microwave를 활용하는 방법이며, SEM과 TEM의 분석을 통해 다양한 크기(55~500 ${\mu}m$)의 공극(pore)이 분포하며 ZnO의 균질한 분포를 확인할 수가 있었다. 메틸렌블루 광분해 특성은 반응 초기(40분)에는 Laponite와 메틸렌블루의 이온결합에 따른 흡착제거가 주요 제거 기작이며, 메틸렌블루의 흡착이 포화상태에 도달 후 광분해를 통한 제거가 발생함을 확인하여 흡착과 광분해가 동시에 발생하여 수중에 용해된 메틸렌 블루를 효과적으로 제거할 수 있음을 확인하였다. 본 연구를 통해 짧은 시간에 흡착과 광분해가 동시에 진행되어 난분해성 오염물질을 효과적으로 제거하는 광촉매 흡착볼의 제작이 가능하며, 나노물질의 탈리로 인해 발생하는 환경 및 수용체에 미치는 위해성도 최소화 할 수 있을 것으로 판단된다.
한국 남$\cdot$서해 및 동중국해 북부 해역에 나타나는 표층수온 전선의 위치, 형태, 시기별 변동상황, 전선형성기구 등을 규명하기 위하여 1991년부터 1996년까지 국립수산진흥원에서 NOAA 화상자료로부터 구한 표면수온분포도와 제주도청 어업지도선 등을 이용하여 월별로 관측한 제주해협 해양관측자료를 이용하여 분석 정리한 결과를 요약하면 다음과 같다. 1. 한국 남$\cdot$서해 및 동중국해 북부 해역에 형성되는 연안형 및 외해형 전선대 양상은 여러 가지 Pattern으로 구분되어 진다. 즉, 1월부터 4월까지 한국 남$\cdot$서 연안역에 나타나는 "L" 자형의 연안형 전선대와 제주도 남서쪽 해역에 북서에서 남동방향으로 길게 형성되는 빗금형 ($\setminus$)의 외해형 전선대가 제주도 서쪽 해역에서 서로 마주치지 않아 "L" 자의 "-"를 비스듬히 세운 형상의 동계형 (ㄴ) 전선대가 형성된다. 그리고 6월부터 8월까지 한국 남$\cdot$서해 연안역에만 전선이 나타나는 "L" 자형의 하계형전선대, 5월과 9월, 10원에 나타나는 한국 남$\cdot$서해의 "L" 자형 연안역 전선대와 제주도 남서해역의 외해형전선대가 제주도 주변에서 서로 마주쳐 "Y" 자가 왼편으로 누운 것과 같은 삼거리 모양의 춘$\cdot$추계형 ($\succ$) 전선대가 형성된다. 또 11월과 12월에 나타나는 한국 남해연안역의 직선형의 연안형 전선대와 제주도 남서해역의 외해형 전선대가 제주도 서쪽에서 마주쳐 "$\angle$" 모양으로 되는 늦가을형으로 대별된다. 2. 전선의 단기변동 경향은 수일 이내에는 그 위치가 크게 이동하지 않고, 또 한국 남해 연안역 전선대보다 제주도 남서해역 전선의 위치 변화가 크다. 한국 남해연안역에는 주년 연안형 전선대가 출현하며 이 전선대는 대체로 동계에 연안역에 가장 접근하고 춘$\cdot$추계에 가장 남쪽으로 이동하는 남북 이동을 하며, 제주도 남서해역 외해형 전선대는 대마난류 분포범위의 계절변화와 같이 동계에는 가장 서쪽에, 춘 추계에는 가장 동쪽에 형성되는 동서방향 이동이 있고 한국 남서해역 연안형 전선대도 주년 나타나지만 3월, 4월, 11월에 가장 약화된다. 3. 제주해협에는 추자도에서 여서도 또는 청산도를 잇는 선 부근에 주년 표층수온 전선이 형성되고, 또 11월$\~$1월을 제외한 시기에 제주도 연안에는 하계에 환(Ring-shaped)의 조석전선이 나타나며 특히 5월과 10월에는 제주도 동쪽과 남쪽에 제주도 연안수와 대마난류수간에 전선이 형성되어 한국 남해의 연안형 전선대와 제주도 남서해역의 외해형 전선대를 연결하고 있다.
A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.
본 연구는 저비용 고효율 중금속 흡착제를 개발하기 위해 바이오매스 전소발전소에서 배출된 바이오차를 이용하여 바이오차 비드를 다양한 혼합조건으로 제조하고, 등온흡착과 동적흡착 모델을 활용하여 Pb 처리 효율을 조사하였다. 바이오차 비드의 Pb 흡착 효과를 확인하기 위해 다양한 조건에서 흡착실험을 수행하였다. Freundlich 등온흡착 모델로 흡착특성을 분석해 본 결과 Pb에 대한 바이오차 비드의 흡착패턴은 L형이었다. Langmuir 등온흡착 모델을 통한 바이오차 비드의 최대 흡착량(a)은 2.5% 바이오차 비드(2.5-BB) 처리구에서 28.736 mg/g로 가장 많았다. Pb에 대한 바이오차 비드의 동적흡착 특성을 조사한 결과 반응 8시간에 포화에 도달하였고, 화학적 흡착이 우세하였다. Pb 흡착량은 Pb 용액의 pH가 3일 때 가장 낮았으며, pH 4-5.5에서는 유사한 Pb 흡착량을 보였다. 2.5% 바이오차 비드(2.5-BB) 처리구의 투입량이 26.6 g/L일 때 Pb 제거 효율이 97.9%로 가장 높았다. 이상의 결과를 미루어 볼때, 바이오차 비드는 바이오차의 장점을 살린 저비용 고효율 흡착제로서 활용이 가능할 것으로 판단된다.
본 연구는 장기 해양관측(1966-1995)자료, 위성관측자료 및 수치모델기법을 이용하여 한국 남서해역에서 하계에 형성되는 조석전선괴 저수온역의 시공간적 변화를 파악하였다. 한국 남서 연안해역에서는 6월과 8월에 대흑산도~진도간 해역의 표면에서 주변 해역보다 $2{\sim}3^{\circ}C$ 낮은 저수온역이 분포하면서 조석전선역이 형성됨을 확인할 수 있었다. 수온수평경도가 $0.3^{\circ}C$/km 이상인 조석전선은 성층계수 2.0~2.5 범위이며, $0.03^{\circ}C$/km 이상인 저수온역은 성층계수 2.5~3.0의 범위와 일치하였다. 소조시에서 대조시까지 조석주기가 변하는 동안 조석전선의 위치변동은 전선은 25~75km, 저수온역의 범위는 60~90km로 조류의 세기에 정비례하여 이동 범위가 커지는 것으로 나타났다. 또한, 남서쪽 외해역으로 저수온역이 확장되는 원인은 진도 남서쪽으로 향하는 10cm/s 이상의 강한 조석잔차류에 의한 것으로 판단된다.
The surface sediments from the manganese nodule exploration area of Korea in the Clarion-Clipperton fracture zone were investigated to understand the resource potential of and emplacement mechanism for rare earth elements (REEs). The sediments are categorized into three lithological units (Unit I, II and III from top to bottom), but into two groups (Unit I/II and Unit III) based on the distribution pattern of REEs. The distribution pattern of REEs in Unit I/II is similar to that of Post-Archean Australian Shale (PAAS), but shows a negative Ce anomaly and enrichment in heavy REEs (HREEs). In Unit III, the HREE enrichment and Ce anomaly is much more remarkable than Unit I/II when normalized to PAAS, which are interpreted as resulting from the absorption of REEs from seawater by Fe oxyhydroxides that were transported along the buoyant plume from remotely-located hydrothermal vents. It is supported by the PAAS-normalized REE pattern of Unit III which is similar to those of seawater and East Pacific Rise sediments. Meanwhile, the PAAS-normalized REE pattern of Unit I/II is explained by the 4:1 mixing of terrestrial eolian sediment and Unit III from each, indicating the much smaller contribution of hydrothermal origin material to Unit I/II. The studied sediments have the potentiality of a low-grade and large tonnage REE resource. However, the mining of REE-bearing sediment needs a large size extra collecting, lifting and treatment system to dress and refine low-grade sediments if the sediment is exploited with manganese nodules. It is economically infeasible to develop low-grade REE sediments at this moment in time because the exploitation of REE-bearing sediments with manganese nodules increase the mining cost.
The coal formation of the Deokpyeong area are interbedded along metapelites of the Ogcheon Supergroup, which are composed mainly of graphite, quartz, muscovite and associated with small amounts of biotite, chlorite, pyrite and barite. The ratios of $SiO_2/Al_2O_3$, $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ of the coaly metapelite are variable and wide range from 1.80 to 10.21, from 27.8 to 388.8 and from 7.6 to 61.8, respectively. These coal formation were deposited in basin of marine environments, and the REE of these rocks are not influenced with metamorphism and hydrothermal alterations on the basis of $Al_2O_3$ versus La, La against Ce, the ratios of La/Ce (0.19 to 0.99) and Th/U (0.02 to 4.75). These rocks also show much variation in $La_N/Yb_N$ (1.19 to 22.89), Th/Yb (0.14 to 21.43) and La/Th (0.44 to 13.67), and their origin is explained by derivation from a mixture of sedimentary and igneous rocks. The wide range in trace and REE element characteristics as Co/Th (0.12 to 2.78), La/Sc (0.33 to 10.18), Sc/Th (0.57 to 5.73), V/Ni (8 to 2347), Cr/V (0.02 to 0.67) and Ni/Co (1.56 to 32.95) of these coaly metapelites argues for inefficient mixing of the various source lithologies during sedimentation. Deep to pale green barium-vanadium muscovites (vanadium-oellacherite) have been found in this coal formations. Modes of occurrence and grain size of muscovite are heterogeneous, but most of the barium and vanadium-bearing muscovites occur along the boundaries between graphite and quartz grains, ranging from 200 to $350{\mu}m$ in length and from 40 to $60{\mu}m$ in width. Results of X-ray diffraction data of the minerals characterized to be monoclinic system with $a=5.249{\AA}$, $b=8.939{\AA}$, $c=20.924{\AA}$ and ${\beta}=95.894^{\circ}$. Representative chemical formula of the muscovite was $(Na_{0.09}K_{1.44}Ba_{0.46})(Al_{2.75}Ti_{0.07}V_{0.56}Fe_{0.08}Mg_{0.50})(Si_{6.12}Al_{1.88})O_{22}$. The V possibly substitute octahedral Al, and the Ba is coupled substitution of $K^+Si^{4+}=Ba^{2+}Na^+Ca^{2+}$, which compositional ranges of V and Ba are from 0.42 to 0.69 and from 0.34 to 0.56 based on $O_{22}$, respectively. Formation mechanism of the barium-vanadium muscovites in the coaly metapelite is shown that the formed by high pressure and temperature from regional metamorphism origanated during diagenesis at the interface between a basinal brine and organic matter.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.