• 상하수도학회지
• /
• 제26권1호
• /
• pp.149-157
• /
• 2012

Experiments for As(V) removal using synthesized $Ca{\cdot}Al$-monosulfate was performed from the water contaminated with arsenate. Monosulfate is known as LDHs (Layered Double Hydroxides) which is one of the anionic clay minerals. Monosulfate was synthesized mixing $C_3A$ (tricalcium aluminate), gypsum (calcium sulfate), and water with an intercalation method. The product form the synthesis was characterized by FE-SEM, WDXRF, PXRD, and FT-IR. Experiments with different doses of monosulfate were carried out for kinetic. As a result of experiment, the concentration of As(V) was reduced from 0.67 mM to 0.19 mM (0.67mM of monosulfate) and 0.178 mM (1.34 mM of monosulfate). The concentration of sulfate was increased with As(V) decrease. The result of PXRD showed that the d-spacing of inter layer ($d_{003}$ peak) was shifted from 8.927 ${\AA}$ to 8.095 ${\AA}$ because the sulfate in the inter layer of monosulfate was exchanged arsenate with water molecules bonded. From the FT-IR results, a new single band (800 cm-1) was observed after the reaction of monosulfate and As(V). The arsenic removal can be regarded as anion exchange mechanism that is one of the characteristics of LDHs from the results of PXRD and FT-IR analysis.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• 한국지반신소재학회논문집
• /
• 제13권2호
• /
• pp.11-20
• /
• 2014

대단위 부지조성을 위해 해안연약지반을 매립후 공기단축 및 안정된 부지를 조성하고자 대부분 연직배수재를 이용하여 지반 개량을 시행한다. 이 과정에서 연약지반내 설치한 연직배수재를 통하여 지반내 간극수가 지표면의 수평배수층으로 이동하여 외부로 배출된다. 과거에는 이 수평배수층 재료로 모래를 사용하였으나 근래에는 재료 품귀 및 단가 상승으로 쇄석으로 조성하는데 상부 성토층과 혼재를 방지하기 위하여 토목섬유(P.P. Mat)를 설치한다. 토목섬유의 설치시 재료비 및 시공비가 발생하여 토목섬유 적용 필요성에 대하여 실내에서 모형토조를 이용하여 단계별로 하중을 달리하고 유입량을 변화시켜 실험한 결과 토목섬유 적용에 따른 통수능에는 큰 차이가 없음을 알 수 있었다.

• 한국물환경학회지
• /
• 제35권3호
• /
• pp.234-247
• /
• 2019

In a deep lake and reservoir, thermal stratification is of great importance for characteristics of hydrodynamic mixing of the waterbody, and thereby influencesvertical distribution of dissolved oxygen, substances, nutrients, and the phytoplankton community. The purpose of this study, was to project the effect of a future climate change scenario on water temperature, stratification strength, and thermal stability in the Soyanggang Reservoir in the Han River basin of South Korea, using a suite of mathematical models; SWAT, HEC-ResSim, and CE-QUAL-W2(W2). W2 was calibrated with historical data observed 2005-2015. Using climate data generated by HadGEM2-AO with the RCP 4.5 scenario, SWAT predicted daily reservoir inflow 2016-2070, and HEC-ResSim simulated changes in reservoir discharge and water level, based on inflow and reservoir operation rules. Then, W2 was applied, to predict long-term continuous changes of water temperature, in the reservoir. As a result, the upper layer (5 m below water surface) and lower layer (5 m above bottom) water temperatures, were projected to rise $0.0191^{\circ}C/year$(p<0.05) and $0.008^{\circ}C/year$(p<0.05), respectively, in response to projected atmospheric temperature rise rate of $0.0279^{\circ}C/year$(p<0.05). Additionally, with increase of future temperature, stratification strength of the reservoir is projected to be stronger, and the number of the days when temperature difference of the upper layer and the lower layer becomes greater than $5^{\circ}C$, also increase. Increase of water temperature on the surface of the reservoir, affected seasonal growth rate of the algae community. In particular, the growth rate of cyanobacteria increased in spring, and early summer.

• 한국환경과학회지
• /
• 제11권5호
• /
• pp.419-436
• /
• 2002

The current paper reports on the enhancement of O$_3$, CO, NO$_2$, and aerosols during the Asian dust event that occurred over Korea on 1 May 1999. To confirm the origin and net flux of the O$_3$, CO, NO$_2$, and aerosols, the meteorological parameters of the weather conditions were investigated using Mesoscale Meteorological Model 5(MM5) and the TOMS total ozone and aerosol index, the back trajectory was identified using the Hybrid Single-Particle Lagrangian Integrated Trajectory Model(HYSPLIT), and the ozone and ozone precursor concentrations were determined using the Urban Ashed Model(UAM). In the presence of sufficiently large concentrations of NO$\sub$x/, the oxidation of CO led to O$_3$ formation with OH, HO$_2$, NO, and NO$_2$ acting as catalysts. The sudden enhancement of O$_3$, CO, NO$_2$ and aerosols was also found to be associated with a deepening cut-off low connected with a surface cyclone and surface anticyclone located to the south of Korea during the Asian dust event. The wave pattern of the upper trough/cut-off low and total ozone level remained stationary when they came into contact with a surface cyclone during the Asian dust event. A typical example of a stratosphere-troposphere exchange(STE) of ozone was demonstrated by tropopause folding due to the jet stream. As such, the secondary maxima of ozone above 80 ppbv that occurred at night in Busan, Korea on 1 May 2001 were considered to result from vertical mixing and advection from a free troposphere-boundary layer exchange in connection with an STE in the upper troposphere. Whereas the sudden enhancement of ozone above 100 ppbv during the day was explained by the catalytic reaction of ozone precursors and transport of ozone from a slow-moving anticyclone area that included a high level of ozone and its precursors coming from China to the south of Korea. The aerosols identified in the free troposphere over Busan, Korea on 1 May 1999 originated from the Taklamakan and Gobi deserts across the Yellow River. In particular, the 1000m profile indicated that the source of the air parcels was from an anticyclone located to the south of Korea. The net flux due to the first invasion of ozone between 0000 LST and 0600 LST on 1 May 1999 agreed with the observed ground-based background concentration of ozone. From 0600 LST to 1200 LST, the net flux of the second invasion of ozone was twice as much as the day before. In this case, a change in the horizontal wind direction may have been responsible for the ozone increase.

• 한국산학기술학회논문지
• /
• 제21권9호
• /
• pp.92-102
• /
• 2020

최근 도로 교통소음 대책으로 다공성포장이 새로운 대안으로 주목받고 있다. 다공성포장은 아스팔트 혼합물 속에 세립자의 비율을 줄여서 여러 개의 공극을 형성하게 하는 포장을 말한다. 이 공극으로 물이 배수되게 하여 교통사고를 줄이고 타이어 노면의 마찰 소음을 줄여주는 역할을 하게 된다. 저소음포장이 일반적으로 활발히 적용되기 위해서는 소음저감 효과에 대한 많은 검증이 필요하다. 본 연구에서는 단층 저소음포장과 복층 저소음포장의 소음저감 효과를 분석하기 위해서 수행되었다. 먼저 단틍 저소음포장과 복층 저소음포장이 시공되어 있는 세종구간을 선정하고 도로변에서 도로교통 소음을 측정하는 방식인 SPB방법으로 교통소음을 측정하였다. 교통영향요소로는 교통량, 속도 그리고 중차량 혼입률을 측정하였다. 측정결과, 복층저소음포장이 단층저소음포장보다 평균 7.95dB(A) 작게 평가되었다. 95% 신뢰도 수준에서는 7.57dB(A) 작게 평가되었다. 도로교통 소음에 미치는 영향요소로는 속도나 대형차 혼입률 보다는 교통량이 가장 크게 영향을 미쳤다. 교통량이 증가할수록 소음은 모두 증가했지만 두 포장 사이의 소음차이는 점차 감소하였다. 도로교통소음에 영향을 미치는 요소로는 교통요소보다 도로포장의 차이가 가장 크게 나타났다. 본 연구를 통해서 도로교통 소음을 줄이기 위한 대책으로 교통속도를 줄이거나 중차량의 통행을 제한하거나 교통량을 줄이는 것보다 도로포장을 바꾸는 것이 가장 효과적인 방법임을 알았다. 이를 검증하고 정량화하기 위한 광범위한 연구가 필요하다.

• 한국토양환경학회지
• /
• 제3권1호
• /
• pp.31-44
• /
• 1998

본 연구는 중금속원소의 주오염원 중의 하나인 금속폐광산에 다량 잔존하는 폐석을 효율적으로 처리하기 위해 실내모형시험을 수행하였으며, 그 결과를 광산폐석처리의 기술개발에 기초자료로 활용하고자 한다. 실험의 도구는 실험결과에 거의 영향이 없는 내산성 내알카리성의 아크릴산수지와 폴리에틸렌 관을 사용하였다. 본 연구에서 제작 운용된 8개의 모형을 계내의 환경, 충진물의 배열방식 및 종류 등으로 분류한다면 4개의 그룹으로 나눌 수 있다. 그룹 1은 계내에 폐석으로만 충진하여 개방계에서 실험한 배경모델이고, 그룹 2는 각각 두 개의 폐석층과 석회암편층을 층상으로 배열한 뒤 개방계와 폐쇄계로 구분하여 실험하였다. 그룹 3은 폐석과 석회암편을 골고루 잘 섞어 계내에 충진하고(혼합모델)이를 개방계와 폐쇄계로 구분하여 실험하였으며, 마지막 그룹 4는 폐석층의 표층부에 석회암편층을 가하여 실험하였다. 배경모델인 모델 Ⅰ로부터 배수된 시수는 실험초기부터 말기까지 중금속원소의 용존량이 매우 높다. 그런, 다른 모델에 비해 그룹 3에 해당되는 모델 Ⅴ와 Ⅶ은 중금속원소의 함량이 매우 낮아 제거효과가 가장 높은 것으로 나타났다. 폐쇄된 혼합모델에서 폐석과 석회암편의 혼합비를 1:1, 2:1로 달리하더라도 중금속원소의 제거효과 는 대동소이한 것으로 나타났다. 그러나, 계내를 같은량의 충진물로 충진하더라도 혼합모델은 층상모델에 비해 중금속원소의 제거효과가 현저히 높다. 그리고, 다른 실험조건이 같은 폐쇄계와 개방계를 비교하면 전자의 중금속원소의 제거효과가 다소 높은 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.53-56
• /
• 2007

We have fabricated organic white light emitting diodes by mixing two colors from very thin rubrene doped and non-doped DPVBi layers. The device structure was ITO/2-TNATA(15 nm)/${\alpha}$-NPD(35 nm)/DPVBi:rubrene(5 nm)/DPVBi(30 nm)/$Alq_{3}(5\;nm)$/BCP(5 nm)/LiF(0.5 nm)/Al(150 nm). The yellow-emitting rubrene of 0.7 wt % was doped into the blue-emitting DPVBi host for the white light. CIE coordinate of the device was (0.31, 0.33) at 8 V. The color coordinates were stable at wide ranges of driving voltages. The luminance was over $1,000\;cd/m^{2}$ at 8 V and increases to $14,500\;cd/m^{2}$ at 12 V. The maximum current efficiency of the device was 8.2 cd/A at $200\;cd/m^{2}$.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2328-2341
• /
• 1995

An experimental study on the flow over the axisymmetric backward-facing step was carried out. The purposes of the present study are to investigate the effect of the free stream turbulence intensity on the reattachment length and to understand the turbulence structure of the recirculating flows. Local mean and fluctuating velocity components were measured in the separated and reattaching axisymmetric turbulent boundary layer over the wall of convex cylinder placed in a water tunnel by using 2-color 4-beam fiber optics laser Doppler velocimetry. As the free stream turbulence intensity increased, the reattachment length became shorter due to the enhanced mixing in the separated shear layer. It was also observed that the reverse flow velocity and turbulent kinetic energy increase with increasing free stream turbulence intensity. Spectral data and flow visualization showed that low-frequency motions occur in the separated flow behind a backward-facing step. These motions have a significant effect on the time-averaged turbulence data.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.771-783
• /
• 1995

A simplified model for the so-called ACRT(accelerated crucible rotation technique) Bridgman crystal growth was considered in order to investigate the principal effects of the periodic variation of angular velocity. Numerical solutions were obtained for Ro=0.5, Ra=4.236*10$_{6}$ and E=2.176*10$^{-3}$ . The effects of spin-up process combined with natural convection was investigated as a preliminary study. The spin-up time scale for the present problem was a little larger than that observed for homogeneous spin-up problems. Numerical results reveal that over a time scale of (H$^{2}$/.nu..omega.$_{f}$)$^{1}$2/ the forced convection due to the formation of Ekman layer predominates. When the state of rigid body rotation is attained, natural convection due to buoyancy emerges as the main driving force and them the steady-state is approached asymptotically. Based on our preliminary results with simple spin-up, several fundamental features associated with variation of rotation speed are successfully identified. When a periodic variation of angular velocity was imposed, the system response was also periodic. Due to effect of mixing, the heat transfer was enlarged. From the analysis of time-averaged Nusselt number along the bottom surface the effect of a periodic variation of angular velocity on the interface location could be indirectly identified.d.