• 한국초지조사료학회지
• /
• 제20권4호
• /
• pp.285-294
• /
• 2000

To investigate the effect of Mycorrhiza (Glomus intradics) and Rhizobium inoculation on the N, P utilization and growth response of Alfalfa (Medicago saliva L.) and Perennial ryegrass (Lolium perenne L.) in mixed sward, four treatments (non-inoculation, Control; Mycorrhiza inoculation: M; Rhizobium inoculation, R and Mycorrhiza and Rhizobium inoculation, M+R) were applied. The associated analyses were canied out on the early vegetative growth stage (DAS 56, 56 days after seeding) and on the early flowering stage (DAS 126). The decreased rate of total N and P content in soil, with advancing plant growth, was relatively higher in the M and M + R treatment than control. The content of availabie phosphorus in soil at DAS 126 increased by about 34 and 38 % in M and M+R treatment compared to control (189.2 mg PzOskg DM), while non-significant changes was observed in R treatment. Total N uptake and P uptake in the control at DAS 126 were 44.71 and 3.52 mglplant in mixed sward, respectively. About 71, 98 and 197 % of increases in total N uptake and 70, 72 and 11 1 % of increases in total P uptake were estimated in M, R and M+R treatment. Comparing to control, total dry matter yield significantly increased by 27, 33 and 53 %, and crude protein yield also by 78, 83 and 204 %, respectively, in M, R and M+R treatment. The present data indicated that mycorrhiza orland rhizobium inoculation improved N, P utilization of both alfalfa and perennial ryegrass plants, and consequently increased total yield (especially by dual inoculation, M+R). (Key words : Alfalfa, Perennial ryegrass, Mycorrhiza, Rhizobium, N and P Utilization, Growth, Yield)

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권1호
• /
• pp.57-65
• /
• 2011

In this paper, a good quality mesh generation for the finite element method is investigated for artificial hip joint simulations. In general, bad meshes with a large aspect ratio or mixed elements can give rise to excessively long computational running times and extremely high errors. Typically, hexahedral elements outperform tetrahedral elements during three-dimensional contact analysis using the finite element method. Therefore, it is essential to mesh biologic structures with hexahedral elements. Four meshing schemes for the finite element analysis of an artificial hip joint are presented and compared: (1) tetrahedral elements, (2) wedge and hexahedral elements, (3) open cubic box hexahedral elements, and (4) proposed hexahedral elements. The proposed meshing scheme is to partition a part before seeding so that we have a high quality three-dimensional mesh which consists of only hexahedral elements. The von Mises stress distributions were obtained and analyzed. We also performed mesh refinement convergence tests for all four cases.

• Journal of Microbiology and Biotechnology
• /
• 제19권10호
• /
• pp.1161-1168
• /
• 2009

Ethanol production by the simultaneous saccharification and fermentation (SSF) of low-value rice wine cake (RWC) without cooking was investigated. RWC is the filtered solid waste of fermented rice wine mash and contains 53% raw starch. For the SSF, the RWC slurry was mixed with the raw-starch-digesting enzyme of Rhizopus sp. and yeast, where the yeast strain was selected from 300 strains and identified as Saccharomyces cerevisiae KV25. The highest efficiency (94%) of ethanol production was achieved when the uncooked RWC slurry contained 23.03% starch. The optimal SSF conditions were determined as 1.125 units of the raw-starch-digesting enzyme per gram of RWC, a fermentation temperature of $30^{\circ}C$, slurry pH of 4.5, 36-h-old seeding culture, initial yeast cell number of $2{\times}10^7$ per ml of slurry, 17 mM of urea as the nitrogen additive, 0.25 mM of $Cu^{2+}$ as the metal ion additive, and a fermentation time of 90 h. Under these optimal conditions, the ethanol production resulting from the SSF of the uncooked RWC slurry was improved to 16.8% (v/v) from 15.1% (v/v) of pre-optimization.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.103-103
• /
• 2002

This study was conducted to investigate cryopreservation of pearl oyster, Pinctada fucata martensii larvae. Four cooling rates (-0.25, -0.5, -0.75 and -1.0$^{\circ}C$/min.) were used to examine a proper cooling rate during cryopreservation of trochophores before seeding temperature (-12$^{\circ}C$). Seven developmental stages (early and late trochophores, early and late D-shaped larvae and early, middle and late umbo stage larvae) and different sugars (fructose, glucose and sucrose) were used to investigate optimal larval stage and effective sugar in cryopreservation of larvae. The survival rates of frozen-thawed trochophores increased at cooling rate of -1.0$^{\circ}C$/min. As larval developing, survival rate of frozen-thawed larvae increased, except umbo stage larvae, and especially late D-shaped larvae highly survived as 91%. Addition of sugar revealed positive effect on cryopreservation in this experiment and 0.2 M glucose and sucrose mixed with 2.0 M dimethyl sulfoxide significantly enhanced survival rate of larvae (P<0.05). The results of our study indicate that desirable cooling rate, developmental stages of larvae and effective sugar far cryopreservation of pearl oyster, P. fucata martensii larvae are -1$^{\circ}C$/min, late D-shaped larvae and 0.2 M glucose and sucrose, respectively.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.104-104
• /
• 2002

This study was performed to find out the optimal larval stage among trochophore, D-shaped and umbo stage larvae and the desirable protective additive such as fructose, glucose, sucrose and trehalose with cryoprotectant for cryopreservation of surf clam, Spisula sachalinensis larvae. Dimethyl sulfoxide and ethylene glycol were used as cryoprotectant and each cryoprotectant was made to 2.0 M with previous protective additives. The larvae were immersed in the preparations waited for 15 minutes to reach equilibration, and then frozen in a program freezer (-35$^{\circ}C$) and liquid nitrogen (-196$^{\circ}C$). The freezing rate of 1.0$^{\circ}C$ /min. was used for cryopreservation of trochophores before seeding temperature (-12$^{\circ}C$). The survival rate of frozen-thawed larvae increased as larval developing and that of umbo stage larvae was the highest as 96.1 ${\pm}$ 1.0%. The presence of lower concentration of disaccharides as sucrose or trehalose significantly enhanced survival rate when mixed with cryoprotectants (P<0.05). The results of our study indicate that desirable developmental stages of larvae and protective additive for cryopreservation are the umbo stage larvae and 0.2 M sucrose, respectively.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.100.2-101
• /
• 2003

To satisfy the increasing medical demanding especially for sever burn patients to regenerate full thickness wound cure, this study developed dermis with gelatin based scaffold and perform the biocompatibility tests. To prepare scaffold 30% of gelatin was mixed with sieved salt and dried in the mold to shape then, cross linked with a water-soluble cross-linker, EDAC. Preparing the cell for seeding from a rabbit skin, the fibroblast and keratinocyte were successfully isolated and cultured in vitro. After cell and scaffold were ready, the fibroblast was seeded to the scaffold (∼10$\^$6/ cell/cm ) for preparing dermis and keratinocyte was cultured until forming the sheet. (omitted)

• 한국지구과학회지
• /
• 제43권4호
• /
• pp.498-510
• /
• 2022

Cloud-aerosol interactions are one of the paramount but least understood forcing factors in climate systems. Generally, an increase in the concentration of aerosols increases the concentration of cloud droplet numbers, implying that clouds tend to persist for longer than usual, suppressing precipitation in the warm boundary layer. The cloud lifetime effect has been the center of discussion in the scientific community, partly because of the lack of cloud life cycle observations and partly because of cloud problems. In this study, the precipitation susceptibility (S_o) matrix was employed to estimate the aerosols' effect on precipitation, while the non-aerosol effect is minimized. The S_o was calculated for the typical coupled, well-mixed maritime stratocumulus decks and giant cloud condensation nucleus (GCCN) seeded clouds. The GCCN-artificially introduced to the marine stratocumulus cloud decks-is shown to initiate precipitation and reduces S_o to approximately zero, demonstrating the cloud lifetime hypothesis. The results suggest that the response of precipitation to changes in GCCN must be considered for accurate prediction of aerosol-cloud-precipitation interaction by model studies

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.127-128
• /
• 2022

In order to realize carbon neutrality in the international society, research on supplementary cementitious materials(SCMs) has been actively conducted as a way to reduce carbon dioxide emissions in the cement industry. However, the use of SCMs causes problems of initial hydration delay and strength reduction due to the reduction of tricalcium silicate(C3S) in the cement clinker. Therefore, in this study, the initial hydration and basic characteristics of cement mortar were confirmed by adding a C-S-H based hardening acceleration to blended cement mixed with Portland cement, blast furnace slag, fly ash, and limestone power. As a result of the heat of hydration and compressive strength test, it was confirmed that when hardening acceleration was added, the initial reactivity was high, so the heat of hydration was promoted, and the initial strength was increased. It is considered to be due to C-S-H seeding effect. Therefore, it is judged that the use of C-S-H based hardening acceleration can supplement the problem of initial hydration delay of blended cement in Korea.

• 한국토양비료학회지
• /
• 제39권5호
• /
• pp.292-297
• /
• 2006

호남평야지에서 건답직파 조기파종재배에 알맞은 완효성복합비료 시용량을 구명하고자 '97~'98년에 호남농업시험장 수도포장인 전북통(미사질양토)에서 동진벼를 공시하여 시험한 결과를 요약하면 다음과 같다. 토양의 암모니아태 질소는 유수형성기까지는 관행시비보다 모든 완효성비료 시비에서 많았고 완효성비료 시용량이 많을수록 많았으나 출수기에는 이삭거름시용으로 관행시비가 완효성비료보다 많았다. 초장은 최고 분얼기까지는 관행시비보다 완효성비료시비에서 길었으나 간장은 완효성비료 100%시용을 제외하고는 관행시비와 같거나 짧았다. 경수와 수수는 모든 생육시기에서 관행시비보다 완효성비료시용에서 많았고 완효성비료 시용량이 많을수록 많았으나 유효경비율은 정수 및 수수와 반대의 경향이었다. 질소 이용율은 관행시비보다 완효성비료시용에서 높았고 완효성비료 시용량이 많을수록 감소되는 경향이었다. 단위면적당 입수는 관행시비보다 완효성비료를 증시할수록 많았으나 현미 천립중은 단위면적당 입수와 반대의 경향이었다. 쌀 수량은 완효성비료 60% 시비는 관행시비와 차이가 없었으나 완효성비료 80%이상에서는 관행시비보다 증수되었다. 이상에서와 같이 질소이용율, 생육, 도복 및 수량을 고려한 벼 건답직파 조기파종 재배에 알맞은 완효성비료 전층시비량은 질소관행 시비량의 80%정도라고 판단된다.

• 한국작물학회지
• /
• 제64권3호
• /
• pp.225-233
• /
• 2019

본 연구는 국산밀의 생산량 증대와 밀가루 품질 균일성 증진을 위해 용도가 다른 금강밀과 백중밀 두 가지 밀 품종의 혼합파종 재배와 밀가루 혼합에 따른 품질과 가공특성을 분석하였고 결과를 요약하면 다음과 같다. 밀 혼파 재배에 따른 수량은 품종이 나타내는 고유 수량에 따라서만 종실 수량이 결정 되었는데, 이는 금강밀과 백중밀의 간장과 수장의 차이가 거의 없어 입지 공간의 증대에 따른 수량 증가는 없고 단순히 단위면적당 수수의 차이로만 수량이 결정된 것으로 보인다. 품질특성은 단백질 함량, 침전가, 손상전분 함량은 혼파 및 밀가루 혼합 둘 다 비율에 따라 품질의 변이의 경향이 같게 나타났고, 특히 밀가루 혼합이 더욱 예측 가능하고 비례적인 품질 변이 결과를 보였다. 밀가루 용매 보유 능력(SRC) 분석 결과 금강밀이 백중밀에 비해 물 흡수도와 손상전분이 적고 글루텐 강도와 arabinoxylan 기여도는 큰 것으로 관찰되었고, 밀가루 혼합의 시료는 비율에 따라 유의성 있게 차이가 났지만 혼파에서 얻은 밀가루는 유의적인 차이를 나타내지 못하였다. Mixograph 반죽 패턴은 금강밀이 피크 높이가 크고 밴드 넓이가 커서 단백질, 침전가, 젖산SRC 값과 같은 경향을 나타내었고, 혼파에 비해 밀가루 혼합에서 더욱 비례적으로 밴드가 변화되는 것을 관찰 할 수 있었다. 이러한 결과를 보아 생산성을 제외하고 품질 균일성을 위해서는 혼파보다는 밀가루 혼합이 더욱 유리하였고, 생산된 밀가루의 여러 가지 품질 특성을 고려 한 후 밀가루 혼합 비율을 조절한다면 원하는 가공적성을 지닌 균일한 품질의 밀가루를 안정적으로 생산 할 수 있을 것으로 판단된다.