• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.14 no.1
• /
• pp.81-106
• /
• 2008

The ECG which used for this paper, is analysis result from alogrisms of arrythmia, and we have studied that how we could certain Cold(寒 )type or Heat(熱) type and that Deficiency(虛) type or Excess(實)type of organs from various special diseases, and we obtained like these results. 1. we depend on our examination about Pulse(脈) because we can't discriminate arrythmia using EKG analysis instruments. 2. We obtained that Cold(寒) type diseases had wave that prolonged above normal baseline and ST wave which had downward aptitude. 3. We obtained that Heat(熱) type diseases had the fibrillation which had shortend wave that compare to normal and had downward aptitude or negative aptitude. 4. We obtained that Respiratory system (肺) diseases had wave that is within normal or is short of normal range and had much fluctuation in potential difference or trans on P wave. 5. The character of EKG which presented about diseases of gastric systems is prolonged above narmal range of wave, and the EKG had represented mixed wave with Heat(熱) type when accompany inflammatory in gastric system. 6. The wave of Blood Stasis(瘀血) type had upward aptitude of QRS wave, and the wave of anemia or blood loss type(少血 ) had downward aptitude of QRS wave, the wave which had both Cold(寒) and Heat (熱) represented mixed waves. 7. The Knotted Pulse(結脈) and Intermittent Pulse(代脈) is corresponded with sinus brady cardia, and the Swift Pulsle(疾脈) is corresponded with fibrillation. 8. We pay attention to the relations of formations about pressures pulse from formations of EMD( electromechanical dissociation ). From these results, we will have to study about EKG which using in tests of change of Parkinsons disease.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.20-25
• /
• 2008

Effects of commercial and lab-generated gellan gums on the textural properties, structure, and aging of wheat and maize starch gels were investigated using a rapid visco-analyzer (RVA), rheometer, scanning electron microscope (SEM), and X-ray diffractometer. Gellan and guar gums increased the peak and final viscosities, but xanthan gum and gum arabic reduced them. The maize starch had higher breakdown viscosity than the wheat starch, regardless of the type of gum. The hardness of all starch gels increased during storage, but their cohesiveness and springiness decreased. The degree of the gel hardness showed higher in maize starch than in wheat starch and the effect of gum addition had a difference with gum type. The wheat starch-guar and -gellan gum mixed gels showed higher elasticity and cohesiveness after storage. The starch-gellan gum mixed gels had dense and stable network structures, and were well maintained even after 7 days of storage. Most of the gums had anti-aging effect on X-ray diffraction pattern of starch gels.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.65-68
• /
• 2005

This paper investigated the engineering properties of cement mortar mixed with more than 2 kinds of sand. For fresh mortar properties, unit volume weight is constant regardless of mixing content and type of sand. An increase in contents of river and crushed sand resulted in an increase in flow, whereas an increase in recycled sand contents reduced flow. Gap between maximum flow in N3C0R0 and minimum flow in N0C0R3 exhibited about $12\%$. Compressive strength at 28 days ranged from 32 to 36 MPa in order for crushed sand, river sand and recycled sand. Mortar with mixed sand along with river sand and crushed sand showed compressive strength comparable to crushed sand. An increase of fraction of recycled sand in mixed sand resulted in a decrease in compressive strength. For drying shrinkage, N0C0R3 had the largest drying shrinkage among various mixture type. The combination of large contents of recycled sand and small contents of river and crushed sand had a large amount of drying shrinkage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.501-506
• /
• 2001

This experiment was conducted to evaluate the effects of supplemental unsaturated fatty acids (UFA) on fermentation characteristics, especially on gas production, cellulose degradation and volatile fatty acid (VFA) concentration by mixed ruminal microorganisms. In order to attain this objective, unsaturated fatty acids including oleic acid (C 18:1), linoleic acid (C18:2) and arachidonic acid (C22:4) were added at varying level. Mixed ruminal microbes used in this experiment were obtained from the rumen of a cannulated Holstein cow. Medium pH values after 7 d incubation were significantly affected by type and level of unsaturated fatty acids (p<0.01). All of UFA inhibited total gas production, and especially treatment of arachidonic acid at the levels of 0.01% gave the lowest gas. production after 7 d incubation (p<0.01). Comparison of the population of protozoa revealed that UFA did not have any significant effect on the total protozoa number. The addition of UFA did not effect dry matter degradation. Volatile fatty acid (VFA) composition of the culture was influenced little by UFA, although the considerable amount of iso-type VFA were detected in UFA supplemented incubations. The ratio of acetic acids to propionic acids, however, was lower than control in all the treatments after 7 d incubation (p<0.01).

• Tribology and Lubricants
• /
• v.30 no.2
• /
• pp.116-123
• /
• 2014

The objective of this study is to model and simulate the nonlinear lubrication performance of the sliding part between the piston and cylinder wall in a hydrostatic swash-plate-type axial piston pump. A numerical algorithm is developed that facilitates simultaneous calculation of the rotating body motion and fluid film pressure to observe the fluid film geometry and power loss. It is assumed that solid asperity contact, so-called mixed lubrication in this study, invariably occurs in the swash-plate-type axial piston pump, which produces a higher lateral moment on the pistons than other types of hydrostatic machines. Two comparative mixed lubrication models, rigid and elastic, are used to determine the reaction force and sliding friction. The rigid model does not allow any elastic deformation in the partial lubrication area. The patch shapes, reactive forces, and virtual local elastic deformation in the partial lubrication area are obtained in the elastic contact model using a simple Hertz contact theory. The calculation results show that a higher reaction force and friction loss are obtained in the rigid model, indicating that solid deformation is a significant factor on the lubrication characteristics of the reciprocating piston part.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.48-60
• /
• 1999

An experimental study on the performance enhancement of a screw-compressor-type chiller with 100kW of nominal cooling capacity has been carried out. Performance test facility was developed to investigate the effects of a partial modification from the existing chiller on the performance. By replacing the existing shell-and -tube heat exchangers with plate heat exchangers, the cooling capacity is increased by 15~18% and the COP is also increased by 19~21% depending on the operation temperature range. Charging mixed refrigerant R22/R142b(80 : 20) instead of R22 into the chiller with plate heat exchangers improves the cooling capacity by 4% and the COP very largely by 30%. Each contribution of the plate evaporator, plate condenser, and mixed refrigerant to the performance enhancement is examined by analyzing the refrigeration cycle and the heat transfer processes. It is also shown that the chiller performance can be improved by adapting 2-stage-compression cycle using an economizer.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.967-974
• /
• 2000

By testing compressive strength, water absorption and water premeablity, to establish the standard of quality of waterproofing admixture of power type for concrete, we propose guide line as following ; $.$Setting time: more than 1 hour, within 10 hours $.$Slump: To be satisfied with request of user $.$Air content: To be satisfied with request of user $.$Safety: Without crack or deformation $.$Ratio of compressive strength: $\circled1$ At 3 days : more than plain specimen by 0.9 (An inorganic material) more than plain specimen by 0.4 (An inorganic material mixed organic) $\circled2$ At 7, 28 days : more than plain specimen by 1.0 $.$Ratio of water absorption Coefficient: $\circled1$An inorganic material: less than plain specimen by 1.0 $\circled2$ An inorganic material mixed organic : under than plain specimen by 0.8 $.$Ratio of water premeablity : $\circled1$ An inorganic material : less than plain specimen by 1.0 $\circled2$ An inorganic material mixed organic : under than plain specimen by 0.8

• Journal of Korean Academy of Rural Health Nursing
• /
• v.3 no.1
• /
• pp.44-52
• /
• 2008

Purpose: This research was done to analyze factors influencing satisfaction level with welfare services by elderly people living in a mixed urban and rural area and to identify directions for improvement of service by examining characteristics of the recipients, type and content of services and the correlation between the level of satisfaction and related factors. Method: The 102 elderly people receiving services from 4 institutions in a mixed urban and rural area were selected. The results of the research include the following. Results: First general characteristics of the service-recipients, and the actual condition of the service; Second, correlation between satisfaction level of the recipients and their economic condition, health condition and activities of daily living; Third, analysis of level of satisfaction related to type of services, frequency, time required, desire of the recipients and their attitudes; Fourth, satisfaction and related factors were identified and used to identify possible problems and directions to improve service. Conclusion: The results suggest the following as ways to improve service and to increase the level of satisfaction 1) Individualization of services 2) Improvement in the way of selecting recipients 3) Reinforcement of special training courses for service providers.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.189-197
• /
• 2003

In this paper, deformation characteristics of fiber-mixed-soils were studied at small strain range(0.0001%～1%) using resonant column test and triaxial test, and reinforcement effect was evaluated by the measure of maximum shear moduli. The effects of the major parameters such as fiber content, aspect ratio and fiber type on reinforcement were comparatively assessed. The specimens were remolded from Jumunjin Sand randomly mixed with discrete polypropylene staple fibers. Maximum shear moduli of fiber-mixed-soils increased by up to 30% and modulus reduction was also restrained in nonlinear range. Shear moduli increased as the aspect ratio increases. The reinforcement was more effective with fibrillated fiber than with monofilament fiber. The most effective reinforcement was achieved with the specimen of 0.3 % fiber content.

• The Korean Journal of Applied Statistics
• /
• v.28 no.2
• /
• pp.281-288
• /
• 2015

In this paper, we study an approximate procedure to evaluate a penalized maximum likelihood estimator (MLE) for a mixed effects model. The procedure approximates the Hessian matrix of the penalized MLE with a structured sparse matrix or an arrowhead type matrix to speed its computation. In this paper, we numerically investigate the gain in computation time as well as approximation error from the considered approximation procedure.