• Journal of Society of Preventive Korean Medicine
• /
• v.17 no.1
• /
• pp.125-135
• /
• 2013

Objectives : Medical treating with eating foods is one of important therapies in East Asian traditional medical knowledge and is referred as a therapy to treat diseases through foods. Since the food cannot be separated from ordinary people living, the medical treating with eating foods is a therapy with strong locality and contains many autogenous parts. Methods : Recently, the world is showing much interest for genetic resources, and the concept of intellectual property is rapidly expanding as the field of 'new knowledge property right' as well. Thus, the knowledge of medical treating with eating foods recently draws much attention in the economic aspect beyond the scholarly interest for traditional medicine. Here, I would like to summarize and report the contents related to medical treating with eating foods on "Yi, SeikKan experience prescriptions" which was discovered before. Results & Conclusions : First, medical treating with eating porridge on "Yi, SeikKan experience prescriptions" is classified into one with nonglutinous rice as the main ingredient and the other with other grains as the main ingredient. It is differently utilized depending on the nature of the grain. Second, medical treating with eating rice on "Yi, SeikKan experience prescriptions" was born from our nation's unique way of living and is classified into one way to eat rice mixed with ground medicinal herbs, another one to cook and eat rice with mixed grains and the other way to use as the external application. Medical treating with eating rice is assumed to replace the meal. Third, "food section" was given separately and discussed in this book. There were some parts different from existing medical knowledge due to the accumulation of experience using medicinal herbs. Fourth, we should pay attention to experience a book on medicine where vibrant medical information has been recorded in order to discover and process our traditional knowledge resources as a useful form.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.263-270
• /
• 2005

This paper summarizes characteristics of the Korean tuna purse seine fishery in the Western and Central Pacific Ocean (WCPO). Major fishing area for the Korean tuna purse seine fleet consisted of the waters of Micronesia, Papua New Guinea and Solomon Islands and adjacent high seas between $130^{\circ}E-180^{\circ}$ The center of the Korean tuna fishing ground was in the vicinity of $180^{\circ}$ during the El - $Ni{\tilde{n}}$o event but was formed in $150^{\circ}-160^{\circ}$E during the La - $Ni{\tilde{n}}o$ event. As compared with other major purse seine fleets in WCPO, the Korean fleet set more on unassociated schools of tuna, while Japan, USA and Chinese - Taipei fleets accounted for more than 50% of sets on log - associated schools. In general, CPUES for log - associated schools were higher than those for unassociated schools and catch composition showed that yellowfin ratio was higher in unassociated shools than log - associated schools. Length frequency represented higher percentage of mid - sized yellowfin than Japanese and USA fleets. Daily set numbers and CPUE were high before 7 am and remained almost constant from 7 am to 3 pm but decreased rapidly after 3 pm and 5 pm, respectively. Catch composition per set indicated that pure skipjack school was caught most frequently, followed by mixed school and pure yellowfin school as the least, but CPUE was highest for the mixed school.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.273-278
• /
• 1983

With the synthetic standards, valuable metals $(Ta_2O_5, Nb_2O_5, TiO_2, SnO_2$, and $ZrO_2$) in the tin slags have been determined by the x-ray fluorescence spectrometry. The powder sample and the standards are homogeneously mixed with anhydrous $Li_2B_4O_7$ and La_2O_3$ in weight ratio of 15 : 42 : 3 respectively. The mixed material is fused at $1,150^{\circ}C$ for 30 minutes to be changed into the glass bead. The bead is ground to (-) 325 mesh size and pelletized. The analytical results obtained in this work are consistent with the data obtained by other common methods within allowable error range. The standard deviation for $Ta_2O_5$ in PTS-H sample is 0.12 % at level of 3.40 % content.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1461-1468
• /
• 2015

Mostly mine support(Rock bolt and Support) which is currently general for reinforcements of a large scale tunnel is applied, Some executing a reinforcement to Poor ground by cast-in-place shotcrete. However On domestic mine conditions that couldn't having every time after mine tunnel excavation, it couldn't ensure the field batch plant which is a fixed in an issue of economies and site security, constructing it by supply gets from shotcrete materials combined in neighborhood ready mixed concrete manufacturing plants. carried shotcrete in ready mixed concrete manufacturing plants as migration length and time are falling off in quality. But, it is difficult for construction quality control By quality control arbitrariness absence at on-scene. In the present study, carry out Laboratory Test by kinds and percentages of accelerating agent for evalution of Mechanical Property and Durability of Shotcrete.

• Membrane Journal
• /
• v.32 no.3
• /
• pp.173-180
• /
• 2022

Presence of ammonia in drinking water is very toxic to human health. Soluble ammonia contaminates ground water due to activities such as the use of fertilizer in crop, industrial effluents and burning of fossil fuel. Even low concentration of ammonia present in water will damage aqua environment such as marine organism. Membrane technology is an important process to remove ammonia from effectively from water. Flat sheet membrane, membrane contactor and membrane distillation are some of the methods used for water purification from ammonia. Membrane contractor is an efficient process in which ammonia is removed through liquid-gas or liquid-liquid mass transfer without change of phase unlike membrane distillation. However, the cost of ammonia removal in this method is high due to maintenance of very high pH. Zeolite has excellent ion exchange ability that enhances its ability to interact with ammonia and adsorb from wastewater. Mixed matrix membranes containing zeolite enhance the efficiency of ammonia adsorption and separation from wastewater. In this review the above discussed issues are summarized in detail.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.1
• /
• pp.23-37
• /
• 2023

One type of biomass that has promising potential for bio pellet production is spent coffee grounds (SCGs). However, previous studies have shown that SCGs in bio pellets cause a lot of smoke. Therefore, they need to be mixed with a material that has a higher calorific value to produce better quality pellets. One material that can be used is pine wood because it has a natural resin content that can increase the calorific value. The aim of this study was to examine the quality of bio pellets produced with SCGs and pine wood charcoal at different particle sizes. The charcoal was ground using either a hammer mill (HM) or a ball mill (BM). Pine wood charcoal was mixed with SCGs at ratios of SCGs to pine wood charcoal of 4:6 and 6:4 by weight, respectively, and the adhesive used a tapioca with a composition ratio 5% of the raw material. The bio pellets were produced using a manual pellet press. The quality of the bio pellets was assessed based on Indonesian National Standard (SNI) 8021-2014, and the physical observations include flame length, burning rate, and compressive strength. The average water content, ash content, and calorific value of the bio pellets were in accordance with SNI 8021-2014, but the density and ash content values were below the standard values. The BM variation of bio pellets had a higher compressive strength than the HM variation, and the 4:6 BM variation had the longest burning time compared with 4:6 HM.

• Atmosphere
• /
• v.17 no.2
• /
• pp.159-169
• /
• 2007

A comparison of the three land cover data sets (United States Geological Survey: USGS, International Geosphere Biosphere Programme: IGBP, and University of Maryland: UMd), derived from 1992-1993 Advanced Very High Resolution Radiometer(AVHRR) data sets, was performed over the Asian continent. Preprocesses such as the unification of map projection and land cover definition, were applied for the comparison of the three different land cover data sets. Overall, the agreement among the three land cover data sets was relatively high for the land covers which have a distinct phenology, such as urban, open shrubland, mixed forest, and bare ground (>45%). The ratios of triple agreement (TA), couple agreement (CA) and total disagreement (TD) among the three land cover data sets are 30.99%, 57.89% and 8.91%, respectively. The agreement ratio between USGS and IGBP is much greater (about 80%) than that (about 32%) between USGS and UMd (or IGBP and UMd). The main reasons for the relatively low agreement among the three land cover data sets are differences in 1) the number of land cover categories, 2) the basic input data sets used for the classification, 3) classification (or clustering) methodologies, and 4) level of preprocessing. The number of categories for the USGS, IGBP and UMd are 24, 17 and 14, respectively. USGS and IGBP used only the 12 monthly normalized difference vegetation index (NDVI), whereas UMd used the 12 monthly NDVI and other 29 auxiliary data derived from AVHRR 5 channels. USGS and IGBP used unsupervised clustering method, whereas UMd used the supervised technique, decision tree using the ground truth data derived from the high resolution Landsat data. The insufficient preprocessing in USGS and IGBP compared to the UMd resulted in the spatial discontinuity and misclassification.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.243-252
• /
• 2019

Recently, as the utilization of underground space increases, the demand for underground excavation increases. In this study, the concrete mixture with a new material was used to develop and evaluate the stability of the CS-H wall that can greatly minimize the problems of existing wall and minimize the impact of ground depression and surrounding ground that may occur in the future for excavation of over 30 m deep in urban areas. The fiber reinforcement formulation of steel fibers, synthetic fibers, and glass fibers, along with fine aggregate parts of PS-ball and ferronickel, were mixed. The Mixture ratios were determined by conducting slump test compresive strength test, modulus of elastic test, flexural strength test, splitting tensile strength test and conductivity test. As a result of the test, the steel fiber mixture showed very good results compared to other reference values in all items, and it is considered to be the most suitable for the CS-H wall to be developed.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.113-125
• /
• 2002

Ground improvement technique of cement stabilization via Deep Soil Mixing with dry cement is gaining popularity, particularly in Japan and other parts of Southeast Asia and in Scandinavia. Cement can be mixed with deep soft clay deposits, typical of marine environments, to improve the bearing capacity and/or reduce the compressibility of the material so that an otherwise poor site can be developed. However, the strength/deformation behaviour and resulting soil structure of the clay-cement mixture is presently not well understood with respect to both dry and wet mix methods. An extensive laboratory test was carried out to determine the mechanical characteristics of kaolin-cement, with some brief examination of the effects of curing environment. Laboratory tests include triaxial tests, unconfined compression tests, isotropic consolidation testis and oedometer tests. Cement contents up to 10 percent were considered and water curing was employed. Samples were cured for 7 to 112 days while submerged in distilled water. Conventional laboratory tests were also performed. In this paper, the laboratory testing program is described and various sample preparation techniques are discussed. Preliminary triaxial compression test results and trends at varying moisture contents, cement contents, confining pressures and curing times will be presented.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.6
• /
• pp.425-438
• /
• 1990

Acoustic and ichthyoplankton data collected from Shelikof Strait in 1981, 1984 and 1985 were examined to determine spawning ground and period of walleye pollock, Theragra chalcogramma. Walleye pollock in the Gulf of Alaska migrated into Shelikof Strait for spawning during late winter and early spring. They entered Shelikof Strait via the warm and saline deep layer (continental slope water mass) in the southwestern channel, and major fish schools concentrated for spawning along the deep trough (250~300m) in the western part of the central strait. Peak spawning activity occurred there from late March to early April. Peak spawning time and area in Shelikof Strait varied little between years, despite difference in hydrography. Geographical advantages together with some oceanographic phenomena (reduced water transport and reduced mixed layer depth in spring) made that area an optimal spawning ground in the Gulf of Alaska during early April. After early April, spawning intensity decreased rapidly and the spawning area tended to expand to the northeast and southwest.