• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.855-862
• /
• 2009

This paper pointed out major problems of land use regulation policy surrounding Paldang Lake as follows: (1) inefficient management system, (2) inconsistent administrative management, (3) illogical selection of regulated area, (4) contradictory present system, and (5) controversial discharge control. Several regulation laws for the land-use surrounding Paldang Lake caused confusion of application and inefficiency of management. Amendment of regulation laws made it possible that the regulated area was developed, which resulted in the deterioration of water quality. In addition, successive regulations without scientific implementation overexpanded regulated area and focus on the discharge concentration of contaminated sources stimulated development of small size sources. To overcome these problems, we suggested reestablishment of regulated area, differentiation of regulation amendments, and flexibility in the application of regulation. It is necessary to arrange regulated area based on the efficient land use management and scientific implementation and then to mitigate land use regulation under the sustainable development. For the flexible application of regulation, it is required to amend the rule in response to the change of environmental condition and development of environmental techniques.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.321-344
• /
• 2017

Smart homes are the new generation of homes where pervasive computing is employed to make the lives of the residents more convenient. Human activity recognition (HAR) is a fundamental task in these environments. Since critical decisions will be made based on HAR results, accurate recognition of human activities with low uncertainty is of crucial importance. In this paper, a novel HAR method based on a difference of convex programming (DCP) problem is represented, which manages to handle uncertainty. For this purpose, given an input sensor data stream, a primary belief in each activity is calculated for the sensor events. Since the primary beliefs are calculated based on some abstractions, they naturally bear an amount of uncertainty. To mitigate the effect of the uncertainty, a DCP problem is defined and solved to yield secondary beliefs. In this procedure, the uncertainty stemming from a sensor event is alleviated by its neighboring sensor events in the input stream. The final activity inference is based on the secondary beliefs. The proposed method is evaluated using a well-known and publicly available dataset. It is compared to four HAR schemes, which are based on temporal probabilistic graphical models, and a convex optimization-based HAR procedure, as benchmarks. The proposed method outperforms the benchmarks, having an acceptable accuracy of 82.61%, and an average F-measure of 82.3%.

• Journal of Animal Environmental Science
• /
• v.21 no.2
• /
• pp.47-54
• /
• 2015

Climate change has directly impacted environmentally dependent first industry. The changes of amount and frequency of precipitation have caused unstable drinking water supply for grassland and feed crop, and have changed the variety of grassland and feed crop. Rising temperature has caused heat stress on livestock, which has impacted feed intake and livestock products, and also has threatened to the health of livestock by widening the range of sources of diseases. In order for livestock industry to confront climate change, new technology development for climate change adaptation and measures of greenhouse gas mitigation are essential. Agroforestry is the one of alternative measures to mitigate greenhouse gases and to adapt to climate change. Agroforestry is the way rearing livestock and cultivating plants in forest, which is suitable to Korea where mountain area is over 68%. Feedstock such as maize, soybean, rice, and grass grown by agroforestry would decrease feed cost. Agroforestry will decrease heat stress of livestock during hot weather and will be possible to pasture, which increases livestock welfare.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.148-157
• /
• 1997

In this paper, the flow around a V-shaped plate positioned against horizontal flow is numerically simulated by using finite volume method and experimentally visualized in two dimensional tank by dye injection method. The upwelling flow artificially induced by V-shaped plate mixes the stratified stagnant flow. It can be applied to mitigate the eutrophication and stratification of sea in the vicinity of offshore structures.

• Tunnel and Underground Space
• /
• v.8 no.2
• /
• pp.118-129
• /
• 1998

A three dimensional boundary element method-BEAP3D was applied to the stability analysis of the mine openings not only to improve the stability during mining operations but also to serve the evaluation of the mine openings for further utilization. Stability analysis on the stability of the room-and-pillar stopes underneath of the old mine openings and the openings to be created by the newly proposed sublevel stoping method at the Nowhado Pyrophyllite Mine, showed that rock mass around the old and new stopes would be stable. Six stopes of a sublevel stoping designed for the Choongmu Limestone Quarry would be stable, too. A sublevel stoping method consisting of six stopes was similarly suggested for the Keumpyung Quartzite Mine. The stability can be guaranteed through out six stopes. Since mining starts from the bottom 1st sublevel to the uppermost sublevel, the safety of the stopes will improve together with the mining process. It would highly be recommended to investigate in-situ rock properties and the rock stresses for future studies. Even though the rock around the uppermost part and bottom of all the stopes have a very high factor of safety, spot reinforcements such as rock bolting would be recommended to mitigate the intermediate and minor principal stresses acting in a tensile mode.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.46-51
• /
• 2003

The charcoal is known to have gas adsorption capability and is used frequently to mitigate the unpleasant smells from food and clothing. It is also used to treat water to remove dissolved organic and inorganic substances. In this paper, we applied the several different kinds of charcoals to the papers in three different ways to investigate if charcoal application method affects its gas adsorption capability. Wet end addition, making multiply, and coating method were tested. Specific ethylene gas adsorption capabilities were measured. Experimental results shows that manufacturing conditions of the charcoal itself changed its gas adsorption properties. The boxes used for agricultural produces, and the packaging paper for flowers are to be well fitted application for the charcoal added paper. Mulch paper, which needs opacity and air permeability with proper strength properties, is another candidate for the application of charcoal added paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.8-15
• /
• 2014

The increase of wet web solid content in wet pressing will save drying energy greatly. We applied wood flours as spacers to increase the old corrugated container (OCC) solid contents in wet pressing. The mixed furnish of OCC and wood flours of 3-5% (wt/wt) increased bulk and drainage rate, and by increasing wet pressing pressure, its solid content started to be higher than 100% OCC furnish at more than 50% solid content level. Addition of cationic starch and drainage aid to the mixed furnish increased solid content further up to around 2%. Cationic starch addition compensated or exceeded the loss of tensile and compressive strength caused by the addition of wood flour, but drainage aid did not. Cationic starch also improved the stretch of the OCC, which could mitigate cracking at folding in boxboard.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.428-433
• /
• 1997

This paper presents a new control strategy for the position and force control of flexible manipulators. The governing equation of motion of a two-link flexible manipulator which features piezoceramic actuators bonded on each flexible beam is derived via Hamilton's principle. The control torque of the motor to command desired position and force is determined by a sliding mode controller on the basis of the rigid-mode dynamics. In the controller formulation, the sliding mode controller with perturbation estimation(SMCPE) is adopted to determine appropriate control gains. The SMCPE is then incorporated with the fuzzy technique to mitigate inherent chattering problem while maintaining the stability of the system. A set of fuzzy parameters and control rules are obtained from a relation between estimated perturbation and actual perturbation. During the commanded motion, undesirable oscillation is actively suppressed by applying feedback control voltages to the piezoceramic actuators. These feedback voltages are also determined by the SMCPE. Consequently, accurate force and position control of a two-link flexible manipulator are achieved. Computer simulations are undertaken in order to demonstrate the effectiveness of the proposed control methodology.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.371-379
• /
• 2017

Objectives: The purpose of this study is to investigate the differences and the influencing factors of health habits such as smoking, drinking, and exercise on job stress among IT workers. Methods: A questionnaire was distributed to total of 300 people (30 persons per business place) at 10 IT work sites performing computer and information system tasks, and 275 data points were analyzed. The survey items were general characteristics, occupational characteristics, employment type, physical burden, amount of drinking, smoking, exercise, and job stress. Results: The results of this study are summarized as follows. First, non-regular workers showed higher smoking, exercise, and job stress than did regular workers by employment type, but exercise was not significant. Regular workers had a higher rate of drinking than non-regular workers. Second, the factors affecting alcohol drinking were gender and age, and factors affecting smoking were gender and employment type. Third, factors affecting job stress were annual income, long working hours, physical burden, and employment type. Conclusions: It is necessary to consider employment patterns in smoking, drinking, and job stress management. In addition, it is necessary to deeply analyze what affects the health behaviors and job stress of IT workers and explore ways to mitigate them.

• Journal of Powder Materials
• /
• v.24 no.4
• /
• pp.315-320
• /
• 2017

There has been much interest in recycling electronic wastes in order to mitigate environmental problems and to recover the large amount of constituent metals. Silver recovery from electronic waste is extensively studied because of environmental and economic benefits and the use of silver in fabricating nanodevices. Hydrometallurgical processing is often used for silver recovery because it has the advantages of low cost and ease of control. Research on synthesis recovered silver into nanoparticles is needed for application to transistors and solar cells. In this study, silver is selectively recovered from the by-product of electrodes. Silver precursors are prepared using the dissolution characteristics of the leaching solution. In the liquid reduction process, silver nanoparticles are synthesized under various surfactant conditions and then analyzed. The purity of the recovered silver is 99.24%, and the average particle size of the silver nanoparticles is 68 nm.