• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.261-270
• /
• 1999

In these days, construction activities have caused civil petitions associated with vibration-induced damages or nuisances. Therefore, it is strongly needed to develop a remedial technique to mitigate unfavorable effects. The objective of this experimental research is to investigate material and structural dynamic characteristics of vibration-controlled concretes which have been proportionally mixed with various vibration reducing material, such as latex, rubber powder, plastic resin, polystyrofoams and etc. Normal and high strength concrete specimens are also prepared for corresponding comparison. As part of the recycling research for obsolete rubber and plastic materials, 32 concrete cylinders and 10 concrete flexural beams have been made for material and structural dynamic properties, respectively. In accordance with the resonance test on concrete cylinders, it can be concluded that concrete with vibration-reducing material have relatively larger material damping ration than normal or high strength concrete. Styrofoam is determined to be very effective vibration-reducing mixtures. From the vibration test on 10 concrete flexural beams, meamwhile, of importance observations was that material damping ratio is very smaller than structural damping ratio of corresponding specimen. But further vibration test on more flexural beams should be strongly needed by varying support conditions.

• Journal of the Korean Geographical Society
• /
• v.38 no.5
• /
• pp.725-740
• /
• 2003

The National Land Planning and Use Law Act at the beginning of 2002, introduced Land Suitability Assessment System(LSAS) in order to mitigate conflicts between development and conservation needs for land. LSAS is to assess land characteristics according to its physical, locational, and environmental characteristics, and then to classify it into several categories based on its usability. This study aims to review the factors to determine the suitability of the land and their weights. Land suitability is determined by a variety of factors, such as land-surface slope and altitude, the type of land use in neighboring areas, accessibility to public facilities and existing developed areas, and ecological characteristics of the land. This article analyzed these factors and their influences by using the Delphi survey and Analytic Hierarchical Process. One of the most influential factors on the development suitability of land is the distance to developed areas and public facilities. On the other hand, the slope and altitude of the land have comparatively low influences on the land development. The coverage of prime cultivating land of the neighbouring region and slope of the land are analyzed as important factors on the agricultural suitability of the land. The ecological features and the ratio of conservation area in the neighbourhood are counted as the most important factors in determining the land for conservation. This article tested these factors and their weights in assessing land suitability of land as a case study.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.122-127
• /
• 2013

The hypochlorite ion ($OCl^-$) is a widely used disinfecting agent in pig rearing in Korea, but its residual effect on $CH_4$ production from pig slurry is unclear. The objective of this study was to investigate the inhibition effects of residual $OCl^-$ on $CH_4$ production during the initial anaerobic digestion stage of pig slurry. Three organic concentrations (9.9, 26.2 and 43.7 g/L) of volatile solids (VS) were tested with the addition of 52.3 mg/L $OCl^-$, ten times of the typical concentration used in Korea, or without $OCl^-$ (Control) in anaerobic batch culture. The culture was run under mesophilic ($38^{\circ}C$) conditions for 20 d. At the lowest organic concentration with $OCl^-$, the VS degradation was 10.3% lower (p<0.05) than Control, while at the higher organic concentration with $OCl^-$, it did not differ from Control. $CH_4$ yields were higher in the control treatments than their $OCl^-$ counterpart cultures, and $CH_4$ yields of Control and $OCl^-$ treatments at the organic concentrations of 9.9, 26.2 and 43.7 g/L differed in the probability level (p) of 0.31, 0.04, and 0.06, respectively. Additionally, $CH_4$ concentration increased steeply and reached 70.0% within 4 d in the absence $OCl^-$, but a gradual increase up to 60.0% was observed in 6 d in the $OCl^-$ treated cultures. The $R_m$ (the maximum specific $CH_4$ production rate) and ${\lambda}$ (lag phase time) of 9.9 g/L with $OCl^-$ were 8.1 ml/d and 25.6 d, while the $R_m$ was increased to 15.1 ml/d, and ${\lambda}$ was reduced to 11.4 d in PS-III (higher organic concentration) with $OCl^-$. The results suggest that a prolonged fermentation time was necessary for the methanogens to overcome the initial $OCl^-$ inhibitory effect, and an anaerobic reactor operated with high organic loadings was more advantageous to mitigate the inhibitory effect of residual hypochlorite ion.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.529-538
• /
• 2019

Typhoons can cause significant financial damage worldwide. For this reason, states, local governments and insurance companies attempt to quantify and mitigate the financial risks related to these natural disasters by developing a typhoon risk assessment model. As such, the importance of typhoon risk assessment models is increasing, and it is also important to reflect local vulnerabilities to enable sophisticated assessments. Although a practical study of economic losses associated with natural disasters has identified essential risk indicators, comprehensive studies covering the correlation between vulnerability and economic loss are still needed. The purpose of this study is to identify typhoon damage indicators and to develop evaluation indicators for typhoon damage prediction functions, utilizing the loses from Typhoon Maemi as data. This study analyzes actual loss records of Typhoon Maemi provided by local insurance companies to prepare for a scenario of maximum losses. To create a vulnerability function, the authors used the wind speed and distance from the coast and the total value of property, construction type, floors, and underground floor indicators. The results and metrics of this study provide practical guidelines for government agencies and insurance companies in developing vulnerability functions that reflect the actual financial losses and regional vulnerabilities of buildings.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.125-133
• /
• 2016

The Project Risk Management is intended to result in the effective management by identifying in advance and mitigating all significant risks including project risks and opportunities during the entire project life cycle - from project inception to completion of construction. It is impossible to predict an exact budget and construction duration before finishing a project. So, Washington Department of Transportation mandates that workshop-based risk management is conducted for projects over specific cost. However, the domestic construction sites have depended on numerical risk analysis without any workshop and efficient risk management have not made. Therefore, in this study, we propose the effective risk management using the RBES program which is very useful for workshop-based risk management and pre & post mitigation, by workshop-based risk management techniques. This proposed risk management approach is applied to a domestic 'A' river recovery project. It is concluded that we may expect the effect to mitigate the total cost overrun problem and the construction duration delay effect in the project by identifying significant risks and by preparing effective risk mitigation strategies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.599-608
• /
• 2012

A numerical analysis has been performed through implicit dynamic finite element analysis using the commercial package, ABAQUS in order to investigate effect of laser peening on welding residual stress mitigation of dissimilar metal welds in a safety injection nozzle of integral reactor. The implicit dynamic finite element analysis are compared with the previous experimental results. By comparison, it is identified that the implicit dynamic finite element analysis is valid for residual stress mitigation via laser peening. Implicit static finite element residual stress analysis has been performed for the dissimilar metal welds subject to inner repair welding. The analysis results represent that both axial and hoop residual stresses are tensile on inner surface of safety injection nozzle due to inner repair welding. Also Parametric study has performed to investigate effect of laser peening variables such as maximum impact pressure, duration time of pressure, spot diameter and peening direction on the welding residual stress mitigation. As a result, it is found that laser peening has the preventive maintenance effect to mitigate mainly residual stresses of region near inner surface.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.231-238
• /
• 2014

BACKGROUND: Biochar (BC) has a great potential for enhancing soil fertility and carbon sequestration while facilitating beneficial waste disposition. Therefore, it is essential to assess and mitigate any inadvertent consequences associated with soil biochar amendment. Earthworm activity is very vital in the soil system, yet there are a limited number of studies that have examined their impact resulting from biochar application to soil. METHODS AND RESULTS: In this study, the survival, growth, reproductive tests, and oxidative DNA damage tests (measured by 8-hydroxydeoxyguanosine (8-OHdG) and catalase (CAT) activities) to assess the potential toxicity to earthworm Eisenia fetida in artificial soil amended with BCs were investigated. The BCs derived from perilla meal, sesame meal, and pumpkin seed were pyrolyzed at 300 and $550^{\circ}C$, and then amended with soil at a rate of 5%. All the earthworms survived, but lost weight compared to control soil after 28 day incubation period. Moreover, the BC-amended soils did not significantly affect the cocoon numbers of earthworms. Slightly higher concentrations of 8-OHdG and CAT were observed in earthworms present in BC-treated soil than those in control soil. Furthermore, the 8-OHdG concentrations in the soil amended with BC produced at $550^{\circ}C$ were greater than those at $300^{\circ}C$, and it slightly decreased as the incubation time increased. CONCLUSION: These observations could be due to higher contents of toxic metal(loid)s and also higher pH in BCs pyrolyzed at $550^{\circ}C$ than $300^{\circ}C$. While BC is efficiently being used in agricultural fields, this study suggests that it is required to assess the unintended negative impacts of BC on soil ecosystems.

• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.235-244
• /
• 2016

In large-area crop classification with MODIS data, a mixed pixel problem caused by the low resolution of MODIS data has been one of main issues. To mitigate this problem, this paper proposes a hierarchical classification algorithm that selectively classifies the specific crop class of interest by using their spectral characteristics. This selective classification algorithm can reduce mixed pixel effects between crops and improve classification performance. The methodological developments are illustrated via a case study in Jilin city, China with MODIS Normalized Difference Vegetation Index (NDVI) and Near InfRared (NIR) reflectance datasets. First, paddy fields were extracted from unsupervised classification of NIR reflectance. Non-paddy areas were then classified into corn and bean using time-series NDVI datasets. In the case study result, the proposed classification algorithm showed the best classification performance by selectively classifying crops having similar spectral characteristics, compared with traditional direct supervised classification of time-series NDVI and NIR datasets. Thus, it is expected that the proposed selective hierarchical classification algorithm would be effectively used for producing reliable crop maps.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.457-463
• /
• 2014

This study was carried out to find out major factors to mitigate carbon emission using Life Cycle Assessment (LCA). System boundary of LCA was confined from sowing to packaging during vegetable production. Input amount of agri-materials was calculated on 2007 Income reference of white radish, chinese cabbage and chive produced at open field and film house published by Rural Development Administration. Domestic data and Ecoinvent data were used for emission factors of each agri-material based on the 1996 IPCC guideline. Carbon footprint of white radish was 0.19 kg $CO_2kg^{-1}$ at open fields, 0.133 kg $CO_2kg^{-1}$ at film house, that of chinese cabbage was 0.22 kg $CO_2kg^{-1}$ at open fields, 0.19 kg $CO_2kg^{-1}$ at film house, and that of chive was 0.66 kg $CO_2kg^{-1}$ at open fields and 1.04 kg $CO_2kg^{-1}$ at film house. The high carbon footprint of chive was related to lower vegetable production and higher fuel usage as compared to white radish and Chinese cabbage. The mean proportion of carbon emission was 35.7% during the manufacturing byproduct fertilizer; white radish at open fields was 50.6%, white radish at film house 13.1%, Chinese cabbage at outdoor 38.4%, Chinese cabbage at film house 34.0%, chive at outdoor 50.6%, and chive at film house 36.0%. Carbon emission, on average, for the step of manufacturing and combustion accounted for 16.1% of the total emission; white radish at open fields was 4.3%, white radish at film house 15.6%, Chinese cabbage at open fields 6.9%, Chinese cabbage at film house 19.0%, chive at open fields 12.5%, and chive at film house 29.1%. On the while, mean proportion of carbon footprint for the step of $N_2O$ emission was 29.2%; white radish at open fields was 39.2%, white radish at film house 41.9%, Chinese cabbage at open fields 34.4%, Chinese cabbage at film house 23.1%, chive at open fields 28.8%, and chive at film house 17.1%. Fertilizer was the primary factor and fuel was the secondary factor for carbon emission among the vegetables of this study. It was suggested to use Heug-To-Ram web-service system, http://soil.rda.go.kr, for the scientific fertilization based on soil testing, and for increase of energy efficiency to produce low carbon vegetable.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.633-641
• /
• 2011

The Philippines is known for its abundant water resources such as the rainfall, where it has a mean annual rainfall range from 965 to 4,100mm. Due to the rapid urbanization of the country, the population in Metro Manila has been continuously increasing hence, the demand for a potable water supply also increases. To mitigate the scarcity of potable water supply, utilization of the water resources should be practiced. Rainwater harvesting is one way to utilize the rainfall runoff. This study analyzedthe potentiality of the rainwater harvesting on residential areas in Metro Manila. A water balance method based spreadsheet was used with input parameters including daily rainfall, catchment area, runoff coefficient, population and the water demand. The efficiency of the domestic water tank was analyzedusing the three different climatic conditions (i.e., minimum, median andmaximum annual rainfalls) and three different types of toilets (i.e., inefficient, conventional and dual-flush toilets). Furthermore, the overflow volume was used to determine which size of rainwater storage was more appropriate for the study area. The results of the study showed that for the three types of rainfall years, only the conventional and dual-flush toilets were suitable for the utilization of rainwater harvesting. The utilization of the $60m^3$ storage tank was sufficient for supplying the demandsof the 90 houses only for a small period of time, 3 months. Based from this study, to fully sustain the long-term water demand of the houses, the enlargement of the tank size having a capacity of 1,100 to $2,500m^3$ is ideal.