• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.179-193
• /
• 2019

Landslides are one of the most damaging geological hazards worldwide, threating both humans and property. Hence, there have been many efforts to prevent landslides and mitigate the damage that they cause. Among such efforts, there have been many studies on mapping landslide susceptibility. Geographic information system (GIS)-based techniques have been developed and applied widely, and are now the main tools used to map landslide susceptibility. We reviewed the status of landslide susceptibility mapping using GIS by number of papers, year, study area, number of landslides, cause, and models applied, based on 776 articles over the last 20 years (1999-2018). The number of studies published annually increased rapidly over time. The total study area spanned 65 countries, and 47.7% of study areas were in China, India, South Korea, and Iran, where more than 500 landslides, 27.3% of all landslides, have occurred. Slope (97.6% of total articles) and geology (82.7% of total articles) were most often implicated as causes, and logistic regression (26.9% of total articles) and frequency ratio (24.7% of total article) models were the most widely used models. We analyzed trends in the causes of and models used to simulate landslides. The main causes were similar each year, but machine learning models have increased in popularity over time. In the future, more study areas should be investigated to improve the generalizability and accuracy of the results. Furthermore, more causes, especially those related to topography and soil, should be considered and more machine learning models should be applied. Finally, landslide hazard and risk maps should be studied in addition to landslide susceptibility maps.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.12
• /
• pp.1890-1896
• /
• 2018

Objective: As the climate changes, it influences ruminant's feed intake, nutrient digestibility, rumen methane production and emission. This experiment aimed to evaluate the effect of feeding Sweet grass (Pennisetum purpureum cv. Mahasarakham; SG) as a new source of good quality forage to improve feed utilization efficiency and to mitigate rumen methane production and emission. Methods: Four, growing crossbred of Holstein Friesian heifers, 14 months old, were arranged in a $4{\times}4$ Latin square design to receive four dietary treatments. Treatment 1 (T1) was rice straw (RS) fed on ad libitum with 1.0% body weight (BW) of concentrate (C) supplementation (RS/1.0C). Treatment 2 (T2) and treatment 3 (T3) were SG, fed on ad libitum with 1.0% and 0.5% BW of concentrate supplementation, respectively (SG/1.0C and SG/0.5C, respectively). Treatment 4 (T4) was total Sweet grass fed on ad libitum basis with non-concentrate supplementation (TSG). Results: The results revealed that roughage and total feed intake were increased with SG when compared to RS (p<0.01) while TSG was like RS/1.0C treatment. Digestibility of nutrients, nutrients intake, total volatile fatty acids (VFAs), rumen microorganisms were the highest and CH4 was the lowest in the heifers that received SG/1.0C (p<0.01). Total dry matter (DM) feed intake, digestibility and intake of nutrients, total VFAs, $NH_3-N$, bacterial and fungal population of animals receiving SG/0.5C were higher than those fed on RS/1.0C. Reducing of concentrate supplementation with SG as a roughage source increased $NH_3-N$, acetic acid, and fungal populations, but it decreased propionic acid and protozoal populations (p<0.05). However, ruminal pH and blood urea nitrogen were not affected by the dietary treatments (p>0.05). Conclusion: As the results, SG could be a good forage to improve rumen fermentation, decrease methane production and reduced the level of concentrate supplementation for growing ruminants in the tropics especially under global climate change.

• Health Policy and Management
• /
• v.29 no.2
• /
• pp.237-244
• /
• 2019

Background: Weekend admission is known for having association with increased mortality attributed by poor quality of care and severe patients. We investigated the association between hospital admission on weekends and the in-hospital mortality rates of patients with cardiovascular disease. Furthermore, we examined this association stratified by admission via emergency room or not. Methods: We analyzed claim data provided by the Health Insurance Review & Assessment in 2013. In total, 80,817 cardiovascular patients were included in this study, which treated in-hospital mortality (early and during total length of stay) as a dependent variable. A generalized linear mixed effects model was used. We conducted subgroup analyses stratified by admission via emergency room or not. Results: Patients who admitted on weekend showed higher in-hospital mortality both early (odds ratio [OR], 1.48; 95% confidence interval [CI], 1.23-1.78) and during total length of stay (OR, 1.17; 95% CI, 1.02-1.33) compared to those admitted on weekdays. Patients who were admitted to the hospital on a weekend by emergency room were more likely to experience early in-hospital mortality compared to those admitted on weekdays. Furthermore, we found that patients not admitted to the hospital through the emergency department were more likely to experience both early and total length of stay in-hospital mortality. Conclusion: Our study shows higher in-hospital mortality rates for cardiovascular patients admitted on weekends. Efforts to improve the quality of care on weekend are important to mitigate the 'weekend effect' and improve patient outcomes.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.22 no.4
• /
• pp.358-368
• /
• 2019

Purpose: Pediatric Crohn's disease (CD) is directly related to growth and has a high probability of requiring surgical intervention(s); therefore, more active treatment for CD is required for children. This study investigated the impact of biologics on growth and disease course associated with surgery. Methods: This was a retrospective cohort study involving patients diagnosed with CD at the Seoul National University Children's Hospital (Seoul, Korea) between January 2006 and October 2017. The aim was to determine the characteristics of pediatric patients with CD and whether biologics affected growth and the surgical disease course. Results: Among patients who underwent surgery for CD, the mean number of operations per patient was 1.89. The mean time from initial diagnosis to surgery was 19.3 months. The most common procedure was fistulectomy (34%), followed by incision and drainage (25%). In all patients, the use of biologics increased the height (p=0.002) and body mass index (BMI) (p=0.005). Among patients who underwent surgery, height (p=0.004) and BMI (p=0.048) were increased in the group using biologics. Patients who used biologics exhibited a low operation rate only within 2 years after diagnosis, with no differences thereafter (p=0.027). Conclusion: Although biologics could not mitigate the operation rate in pediatric patients who underwent surgery for CD, biological therapy delayed disease progression within 2 years of disease onset. Additionally, biologics conferred growth and BMI benefits in this window period. Therefore, it may be helpful to use biologics for optimal growth in pediatric patients with a high probability of undergoing future surgery.

• Smart Structures and Systems
• /
• v.24 no.1
• /
• pp.127-139
• /
• 2019

Residual drifts after an earthquake can incur huge repair costs and might need to replace the infrastructure because of its non-reparability. Proper functioning of bridges is also essential in the aftermath of an earthquake. In order to mitigate pounding and unseating damage of bridges subjected to earthquakes, a self-adaptive Ni-Ti shape memory alloy (SMA)-cable-based frictional sliding bearing (SMAFSB) is proposed considering self-adaptive centering, high energy dissipation, better fatigue, and corrosion resistance from SMA-cable component. The developed novel bearing is associated with the properties of modularity, replaceability, and earthquake isolation capacity, which could reduce the repair time and increase the resilience of highway bridges. To evaluate the super-elasticity of the SMA-cable, pseudo-static tests and numerical simulation on the SMA-cable specimens with a diameter of 7 mm are conducted and one dimensional (1D) constitutive hysteretic model of the SMAFSB is developed considering the effects of gap, self-centering, and high energy dissipation. Two types of the SMAFSB (i.e., movable and fixed SMAFSBs) are applied to a two-span continuous reinforced concrete (RC) bridge. The seismic vulnerabilities of the RC bridge, utilizing movable SMAFSB with the constant gap size of 60 mm and the fixed SMAFSBs with different gap sizes (e.g., 0, 30, and 60 mm), are assessed at component and system levels, respectively. It can be observed that the fixed SMAFSB with a gap of 30 mm gained the most retrofitting effect among the three cases.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.2
• /
• pp.196-213
• /
• 2019

This paper attempts to analyze the contribution of different socioeconomic factors such as income, age, gender, household composition, education and employment status etc. to the difference between the Capital and Non-Capital Regions in the net wealth inequality of household in Korea. To this end, a two-stage Oaxaca-Blinder type decomposition is employed regarding the regional gap in the inequality of net wealth based upon the Recentered Influence Function of the Gini index for 'the 2018 Household Finance and Living Conditions Survey.' Despite the shortcomings of the survey data on wealth, the findings reveal that regional differences in income, marriage status (divorce), job type (agriculture, forestry and fishery related, and technical and assembly), family type (multi-cultural) variables deepen the regional gap in the net-wealth inequality, but employment status (full-time), job type (administrative and specialized, and service sales), household size variables mitigate the gap, and that regional differences in life cycles play an offsetting role.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.1
• /
• pp.28-32
• /
• 2019

In nuclear power plant operation and spent fuel canisters, it is necessary to provide a sound technical basis for the safety and security of long-term operation and storage respectively. Recently, the peening technology is being discussed and the technology will be adopted to ASME Section III, Division 1, Subsection NX (2019 Edition). The peening is prohibited in current edition, but it will be approved in 2019 Edition and adopted. However, Surface stress improvement techniques such as the peening is used to mitigate SCC susceptible in operating nuclear plants. Although the peening will be approved to ASME CODE, there are no performance criteria listed in the 2019 edition. The Korean International Working Group (KIWG) formed a new Task Group named "Advanced Surface Stress Improved Technology". The task group will develop a CODE CASE to address PWSCC(Primary Water Stress Corrosion Cracking) and CISCC(Chloride Induced Stress Corrosion Cracking) for new ASME Section III components. TG-ASSIT was started to make peening performance criteria for ASME Section III (new fabrication) applications. The objective of TG-ASSIT is to gain consensus among the relevant Code groups that requirements/mitigation have been met.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.655-658
• /
• 2016

Xilinx 7-Series FPGA(Field Programmable Gate Array)s mainly used for the implementation of high-performance digital circuit have SRAM-type configuration memory and can malfunction when soft errors occur in their configuration memory. SEM(Soft Error Mitigation Controller) offered by Xilinx helps users mitigate the influence of soft errors in configuration memory. When soft errors occur, SEM Controller can recover the state of FPGA through partial reconfiguration if the soft errors are correctable by ECC(Error Correction Code) and CRC(Cyclic Redundancy Code). This paper presents the availability analysis of Xilinx 7-Series FPGAs against soft errors under the protection of the SEM Controller. Availability functions are derived and compared according to the correction capability of the SEM Controller. The result may help to estimate the reliability of SRAM-based FPGA running in an environment where soft errors may occur.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1389-1396
• /
• 2019

Objective: The current study analysed the relationships between methane ($CH_4$) output from animal and dietary factors. Methods: The dataset was obtained from 159 Dorper${\times}$thin-tailed Han lambs from our seven studies, and $CH_4$ production and energy metabolism data were measured in vivo by an opencircuit respiratory method. All lambs were confined indoors and fed pelleted diet during the whole experimental period in all studies. Data from two-thirds of lambs were used to develop linear and multiple regressions to describe the relationship between $CH_4$ emission and dietary variables, and data from the remaining one third of lambs were used to validate the established models. Results: $CH_4$ emission (g/d) was positively related to dry matter intake (DMI) and gross energy intake (GEI) (p<0.001). $CH_4$ energy/GEI was negatively related to metabolizable energy/gross energy and metabolizable energy/digestible energy (p<0.001). Using DMI to predict $CH_4$ emission (g/d) resulted in a coefficient of determination ($R^2$) of 0.80. Using GEI, digestible energy intake, and metabolizable energy intake predict $CH_4$ energy/GEI resulted in a $R^2$ of 0.92. Conclusion: the prediction equations established in the current study are useful to develop appropriate feeding and management strategies to mitigate $CH_4$ emissions from sheep.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.3
• /
• pp.169-178
• /
• 2019

PURPOSE. While dental implants have displayed high success rates, poor mechanical fixation is a common complication, and their biomechanical response to occlusal loading remains poorly understood. This study aimed to develop and validate a computational model of a natural first premolar and a dental implant with matching crown morphology, and quantify their mechanical response to loading at the occlusal surface. MATERIALS AND METHODS. A finite-element model of the stomatognathic system comprising the mandible, first premolar and periodontal ligament (PDL) was developed based on a natural human tooth, and a model of a dental implant of identical occlusal geometry was also created. Occlusal loading was simulated using point forces applied at seven landmarks on each crown. Model predictions were validated using strain gauge measurements acquired during loading of matched physical models of the tooth and implant assemblies. RESULTS. For the natural tooth, the maximum vonMises stress (6.4 MPa) and maximal principal strains at the mandible ($1.8m{\varepsilon}$, $-1.7m{\varepsilon}$) were lower than those observed at the prosthetic tooth (12.5 MPa, $3.2m{\varepsilon}$, and $-4.4m{\varepsilon}$, respectively). As occlusal load was applied more bucally relative to the tooth central axis, stress and strain magnitudes increased. CONCLUSION. Occlusal loading of the natural tooth results in lower stress-strain magnitudes in the underlying alveolar bone than those associated with a dental implant of matched occlusal anatomy. The PDL may function to mitigate axial and bending stress intensities resulting from off-centered occlusal loads. The findings may be useful in dental implant design, restoration material selection, and surgical planning.