• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.70-75
• /
• 2007

In order to mitigate the problems in storage space and network bandwidth for the full CD quality audio with 44.1 kHz sampling rate, current existing digital audio is always restricted by sampling rate and bandwidth. This kind of restriction normally can be resolved by using low bit rate audio codec such as MP3, OGG, and AAC. However it suffers a major problem such as a loss of high frequency fidelity. This high frequency loss will reproduce only the band-limited low-frequency part of audio in the standard CD-quality audio. In general, the high frequency contents of audio have lots of information such as localization and ambient information, and bright nature of audio. The purpose of this paper is to implement on ARM platform system that can effectively estimate and compensate the missing high frequency contents of MP3 audio. From the experimental results with spectrum analysis and listening test, we confirm the superiority of the proposed algorithms for MP3 audio quality enhancement.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.33-40
• /
• 2015

Inverse problem in electrical impedance tomography (EIT) is highly ill-posed therefore prior information is used to mitigate the ill-posedness. Regularization methods are often adopted in solving EIT inverse problem to have satisfactory reconstruction performance. In solving the EIT inverse problem, iterative Gauss-Newton method is generally used due to its accuracy and fast convergence. However, its performance is still suboptimal and mainly depends on the selection of regularization parameter. Although, there are few methods available to determine the regularization parameter such as L-curve method they are sometimes not applicable for all cases. Moreover, regularization parameter is a scalar and it is fixed during iteration process. Therefore, in this paper, a novel method is used to determine the regularization parameter to improve reconstruction performance. Conductivity norm is calculated at each iteration step and it used to obtain the regularization parameter which is a diagonal matrix in this case. The proposed method is applied to human thorax imaging and the reconstruction performance is compared with traditional methods. From numerical results, improved performance of proposed method is seen as compared to conventional methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1416-1426
• /
• 2008

In this paper, we present a small size and multiband directional dipole antenna for mobile communication repeaters. In the omni-directional dipole antenna, a planar reflector under the dipole provides improved directivity in front-direction with wide beamwidth. In order to miniaturize the directive dipole, the size of the reflector is reduced. A vertical stub on the reflector is proposed to enhance the front-directivity of the radiation pattern and mitigate the backward radiation due to the reduced reflector. Furthermore, we use horizontal stubs on edge of vertical stub to obtain additional reduction of the antenna size. To meet the current demand of wireless communication service, the designed antenna shows wideband characteristic by employing electromagnetic coupled two-dipoles with dual-resonance frequencies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1173-1179
• /
• 2012

In this paper, collision avoidance beamforming(CA-BF) technology is proposed to mitigate inter-cell interference in cooperative wireless communications system with limited feedback. Each acess terminal(AT) selects both the best BF weight vector for a serving base transceiver station(BTS) and the most interfering BF weight vectors of interfering BTSs within a cluster, and sends it back to a cluster scheduler. At the cluster scheduler, a set of transmit BF weights of BTSs and the corresponding scheduled ATs are jointly determined to avoid collision among beams formed by BTSs within a cluster, which enhances system throughput by mitigating inter-cell interference. It is shown that the proposed CA-BF outperforms existing non-coordinated BF schemes in terms of the average system throughput.

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.423-434
• /
• 2009

In recent years, the urban thermal environment has become worse, such as days on which the temperature goes above $30^{\circ}C$, sultry nights and heat stroke increase, due to the changes in terrestrial cover such as concrete and asphalt and increased anthropogenic heat emission accompanied by artificial structure. The land use type is an important determinant to near-surface air temperature. Due to these reasons we need to understand and improve the urban thermal environment. In this study, the fifth-generation Pennsylvania State University-National Center for Atmospheric Research Mesoscale Model(MMS) was applied to the metropolitan of Daegu area in order to investigate the influence of land cover changes and urban modifications increase of Albedo to the surface energy budget on the simulated near-surface air temperature and wind speed. The single urban category in existing 24-category U.S. Geological survey land cover classification used in MM5 was divided into 6 classes to account for heterogeneity of urban land cover. As a result of the numerical simulation intended for the metropolitan of Daegu assumed the increase of Albedo of roofs, buildings, or roads, the increase of Albedo (Cool scenario)can make decrease radiation effect of surface, so that it caused drops in ambient air temperature from 0.2 to 0.3 on the average during the daylight hours and smaller (or near-zero) decrease during the night. The Sensible heat flux and Wind velocity is decreased. Modeling studies suggest that increased surface albedo in urban area can reduce surface and air temperatures near the ground and affect related meteorological parameters such as winds, surface air temperature and sensible heat flux.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.962-968
• /
• 2016

The large scaled lead-acid battery is widely used for efficient operation of the photovoltaic system in many islands. However, lithium-ion battery is now being introduced to mitigate the fluctuation of wind power and to replace lead-acid battery. Therefore, hybrid ESS(Energy Storage system) that combines lithium-ion battery with lead-acid battery is being required because lithium-ion battery is costly in present stage. Under this circumstance, this paper presents the optimal algorithm to create composition rate of hybrid ESS by considering fixed and variable costs in order to maximize advantage of each battery. With minimization of total cost including fixed and variable costs, the optimal composition rate can be calculated based on the various scenarios such as load variation, life cycle and cost trend. From simulation results, it is confirmed that the proposed algorithms are an effective tool to produce a optimal composition rate.

• Journal of the Korean Institute of Gas
• /
• v.5 no.3 s.15
• /
• pp.73-79
• /
• 2001

The corner protection which is consist of insulation and $9\%$ nickel liner is designed to mitigate the high hoop tension at the corner of LNG storage tank by LNG leakage. So the design loads depend on thermal and liquid pressure from leaked LNG In this paper design conditions are suggested as operating, major and minor leak conditions. And in order to check integrity of comer protection for the design conditions by appendix 4 in ASME section VIII div.2, acceptability checking process that have stress categorization and finite element analysis is explained.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.44-55
• /
• 2008

Catalyzed by the recent development of space technology, various kinds of spacecrafts were launched and utilized with purposes in many developed countries. In case of emergency such as natural disasters, proper satellite images are required in order to help to mitigate and assess the effects of disasters on human life and property. Since there are limitations for a nation to single-handedly operate a satellite and fulfill complete demands, a development need of international cooperation organization to share satellite images among the member countries has risen. In this paper, preestablished four international organizations' background, objectives, and operating system, and their principal characteristics were analyzed and compared. Especially, the paper has focused on the analysis of on-going operating procedures and its cases for International Charter, UN SPIDER's development of local supporting network to support NFP, establishment of Web-GIS by Sentinel Asia under the goal of 'Digital Asia', and the utilization of GEO that is widely applied in natural disaster fields.

• Journal of Korea Game Society
• /
• v.4 no.1
• /
• pp.58-66
• /
• 2004

This paper uses counterexamples for solving reachability games. An objective. of the game we consider here is to find out a minimal path from an initial state to the goal state. We represent initial states and game rules as finite state model and the goal state as temporal logic formula. Then, model checking is used to determine whether the model satisfies the formula. In case the model does not satisfy the formula, model checking generates a counterexample that shows how to reach the goal state from an initial state. In this way, we solve many of small-sized Push Push games. However, we cannot handle larger-sized games due to the state explosion problem. To mitigate the problem, abstraction is used to reduce the state space to be che cked. As a result, unsolved games are solved with the abstraction technique we propose inthis paper.

• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.955-982
• /
• 2016

Recent studies integrating vibration control and structural health monitoring (SHM) use control devices and control algorithms to enable system identification and damage detection. In this study real-time SHM is used to enhance structural vibration control and reduce damage. A newly proposed control algorithm, including integrated real-time SHM and semi-active control strategy, is presented to mitigate both damage and seismic response of the main structure under strong seismic ground motion. The semi-active independently variable stiffness (SAIVS) device is used as semi-active control device in this investigation. The proper stiffness of SAIVS device is obtained using a new developed semi-active control algorithm based on real-time damage tracking of structure by damage detection algorithm based on identified system Markov parameters (DDA/ISMP) method. A three bay five story steel braced frame structure, which is equipped with one SAIVS device at each story, is employed to illustrate the efficiency of the proposed algorithm. The obtained results show that the proposed control algorithm could significantly decrease damage in most parts of the structure. Also, the dynamic response of the structure is effectively reduced by using the proposed control algorithm during four strong earthquakes. In comparison to passive on and off cases, the results demonstrate that the performance of the proposed control algorithm in decreasing both damage and dynamic responses of structure is significantly enhanced than the passive cases. Furthermore, from the energy consumption point of view the maximum and the cumulative control force in the proposed control algorithm is less than the passive-on case, considerably.