• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.23-32
• /
• 2001

Electrical impedance tomography (EIT) is a relatively new imaging modality in which the resistivity (conductivity) distribution of the unknown object is estimated based on the known sets of injected currents and measured voltages on the surface of the object. In this paper, we propose a dynamical EIT reconstruction algorithm based on the regularized extended Kalman filter(EKF). The EIT inverse problem is formulated as dynamic equation which consists of the slate equation and the observation equation, and the unknown state(resistivity) is estimated recursively with the aid of the EKF. In doing so, the generalized Tikhonov regularization technique is employed in the cost functional to mitigate the ill-posedness characteristics of the inverse problem. Computer simulations for the 16-channel synthetic data are provided to illustrate the reconstruction performance of the proposed algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.40-47
• /
• 2015

We propose a method to provide a selective VoD service during live streaming sessions. In the proposed method, each peer joined the live streaming session receives video stream packets with P2P manner and stores the packets to provide a VoD service. To mitigate the overhead of each peer node to store the video stream packets, the proposed scheme categorizes peers into three different groups based on their link types. To increase data gathering speed and reduce the network load, we also proposes the P2P transmission scheme within the same AP network for the peers with Wi-Fi link. To evaluate the performance of the proposed method, we implement computer simulator using NS-3. Simulation results show that the proposed method reduces the overhead about 66% and increases the P2P data gathering speed about 50% compared to the conventional schemes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.6-11
• /
• 2007

This paper proposes CMOS optical receivers to reduce effective area and pulse width distortion (PWD) in high definition digital audio interfaces. To mitigate effective area and PWD, proposed receivers include a frans-impedance amplifier (TIA) with dual output and a level shifter with threshold convergence, respectively. Proposed circuits are fabricated using $0.25{\mu}m$ CMOS process and measured result demonstrated the effective area of $270\times120{\mu}m^2$ and PWD of ${\pm}3%$ for the receiver with a dual output TIA, and the effective area of $410\times140{\mu}m^2$ and PWD of ${\pm}2%$ for the receiver with a threshold convergence level shifter.

• Journal of Forest and Environmental Science
• /
• v.36 no.1
• /
• pp.37-46
• /
• 2020

Vegetation carbon sequestration and regeneration are the two major parameters of forest research. In this study, we analyzed the vegetation carbon stock and regeneration of community-managed pine plantation of Kathmandu, central Nepal. Vegetation data were collected from 40 circular plots of 10 m radius (for the tree) and 1m radius (for seedling) applying a stratified random sampling and nested quadrat method. The carbon stock was estimated by Chave allometric model and estimated carbon stock was converted into CO₂ equivalents. Density-diameter (d-d) curve was also prepared to check the regeneration status and stability of the plantation. A d-d curve indicates the good regeneration status of the forest with a stable population in each size class. Diversity of trees was very low, only two tree species Pinus roxburghii and Eucalyptus citriodora occurred in the sample plots. Pine was the dominant tree in terms of density, basal area, biomass, carbon stock and CO₂ stock than the eucalyptus. The basal area, carbon stock and CO₂ stock of forest was 33±1.0 ㎡ ha^-1, 108±5.0 Mg ha^-1 and 394±18 Mg ha^-1, respectively. Seedling and tree density of the plantation was 4,965 ha^-1 and 339 ha^-1 respectively. The forest carbon stock showed a positive relationship with biomass, tree diameter, height and basal area but no relationship with tree density. Canopy cover and tree diameter have a negative effect on seedling density and regeneration. In conclusion, the community forest has a stable population in each size class, sequestering a significant amount of carbon and CO₂ emitted from densely populated Kathmandu metro city as the forest biomass hence have a potentiality to mitigate the global climate change.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.153-163
• /
• 2001

Electrical impedance tomography(EIT) is a relatively new imaging modality in which the internal impedivity distribution is reconstructed based on the known sets of injected currents and measured voltages on the surface of the object. We describe a dynamic EIT imaging technique for the case where the resistivity distribution inside the object changes rapidly within the time taken to acquire a full set of independent measurement data. In doing so, the inverse problem is treated as the state estimation problem and the unknown state (resistivity) is estimated with the aid of extended Kalman filter in a minimum mean square error sense. In particular, additional electrodes are attached to the known internal structure of the object to enhance the reconstruction performance and modified Tikhonov regularization technique is employed to mitigate the ill-posedness of the inverse problem. Computer simulations are provided to illustrate the reconstruction performance of the proposed algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.35-41
• /
• 2011

The national police agency has executed the project for the advancement of traffic control and operation systems in order to mitigate chronic traffic problems and to meet the global standards regarding the traffic control and operation systems. This study effort was initiated to evaluate the effects of various policies proposed for the advancement of traffic control and operation systems. The evaluation results indicated that the policies proposed for the advancement of traffic control and operation systems showed apparent and positive effects in terms of transportation mobility and safety. However, there have been many difficulties to overcome in order to settle down the policies proposed for the advancement of traffic control and operation systems as smooth as possible. For example, the violation of intersection passing method has been increased after the implementation of the advancement of traffic control and operation systems in majority of evaluation sites. In addition, lacks of awareness as well as improper operations of the advancement of traffic control and operation systems have caused drivers' confusions, which generated more traffic congestion and risks. Currently, the policies for the advancement of traffic control and operation systems focused on the improvements of traffic signal operations, including leading through movements and permissive left-turns. However, synergy effects may be expected if all of the policies including the improvements of traffic signal operations are executed together.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.79-88
• /
• 2018

With the increasing popularity of electronic toll collection system using 5.8 GHz dedicated short-range communications (DSRC) technology, DSRC-based travel-time collection systems have been deployed on major urban and rural arterial routes in Korea. However, since probe sample sizes are frequently insufficient in probe-based systems, the gathered travel times from probe vehicles fluctuate significantly compared to those of the population; as a result, the accuracy of the collected travel times could decrease. To mitigate the fluctuations (also known as biases), smoothing techniques need to be applied. In this study, some smoothing techniques-moving average, the Loess, and Savitzky-Golay filtering-were applied to probe travel times. Resultantly, the error in the smoothed travel times at the lowest sampling plan (5%) decreased as much as 45% compared to those in non-smoothed travel times. The results of this study can be practically applied to probe-based travel-time estimation systems for providing reliable travel times along the travel corridor.

• Transactions of Materials Processing
• /
• v.25 no.1
• /
• pp.12-20
• /
• 2016

Press machines and dies are commonly used for 3D curved sheet forming. Using conventional die forming can cause economic problems since various modifications of the die shape are required depending on the product shape. Various types of flexible forming such as multi-point dieless forming (MDF), flexible incremental roll forming have been developed to improve the needed process flexibility. Although MDF can reduce the production cost using reconfigurable dies, it still has significant material loss. Drawbacks such as wrinkling, dimpling, and forming errors can also occur despite continuous investigations to mitigate these defects. A novel sheet forming process for 3D curved surfaces, a flexibly-reconfigurable roll forming (FRRF), has been recently proposed to overcome the economic and technical limitations of current practice. FRRF has no limitation on blank size in the longitudinal direction, and also minimizes or eliminates forming defects such as wrinkling and dimpling. Feasibility studies of FRRF have been conducted using FE simulations for multi-curved shapes and various sheet thicknesses. Therefore, the fabrication of a FRRF apparatus is required for any follow-up studies. In the current study, experiments with reconfigurable rollers were conducted using a simple design pre-FRRF apparatus prior to fabricating the full size FRRF apparatus. There are three candidates for the reconfigurable roller: a bar-type shaft, a flexible shaft, a ground flexible shaft. Among these candidates, the suitable reconfigurable roller for FRRF is determined through various forming tests.

• Journal of the Korean Geographical Society
• /
• v.48 no.1
• /
• pp.151-165
• /
• 2013

This article addresses potential errors in accounting greenhouse gas (GHG) emissions based on the International Council for Local Environmental Initiatives' (ICLEI's) International Local Government Greenhouse Gas Emissions Analysis Protocol (IEAP). The IEAP seems to provide practical guidelines for local governments so that they can measure their GHG emissions. The outcomes are immediately convertible for any national GHG inventory analysis when one is constructed based on the methodology drafted by Intergovernmental Panel on Climate Change. Further, it provides a societal foundation at the global level in order for local governments to collectively deal with 'double-counting' and 'allocation' problems. However, ICLEI's IEAP overlooks two major issues: (1) the protocol does not consider carbon dioxide emissions due to burning biological fuel as a type of GHG emission; and (2) it overlooks the possibility of indirect double-counting when producing emission factors at the local level. Thus, the limitations must be fixed so that the local governments can measure their GHG emissions more precisely, while the accurate GHG inventory will ultimately support reducing the local governments' emissions to mitigate anthropogenic climate change.

• Journal of Environmental Science International
• /
• v.12 no.8
• /
• pp.853-860
• /
• 2003

Plants sequester atmospheric CO$_2$, a major agent of climate change, during the growing periods and mitigate its rising accumulation in the atmosphere. Pinus densiflora and Quercus mongolica are the native tree species dominant in the temperate forests of Korea. This study quantified the annual CO$_2$ uptake by the two species at forest sites in Chuncheon in the middle of the country. The quantification was based on seasonal measurements of CO$_2$ exchange rates under natural conditions by an infrared gas analyzer over the growing season (1999). The monthly CO$_2$ uptake per unit leaf area ranged from 1.6-6.7 mg/d㎡/h for P. densiflora and from 3.7-8.9 mg/d㎡/h for Q. mongolica, with a maximum in mid-summer. An equation for each species was generated to estimate easily the annual CO$_2$ uptake by total leaf area per tree, which subtracted the CO$_2$ release (i.e. respiration) by leaves and woody organs from the gross CO$_2$ uptake (diurnal uptake and release by leaves). Annual CO$_2$ release by leaves and woody organs accounted for 58-73％ of the gross CO$_2$ uptake across tree specimens. Annual CO$_2$ uptake per tree increased with increasing dbh (stem diameter at breast height) for the study diameter range, and was greater for Q. mongolica than for P. densiflora in the same dbh sizes. This was mainly associated with a greater total leaf area in the former. For example, the annual CO$_2$ uptake by one tree with dbh of 25 cm was 35.6 kg/yr for P. densiflora and 47.9 kg/yr for Q. mongolica. The results from this study can be applied to evaluate an atmospheric CO$_2$ reduction of woody plants by forest type and age class.