• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.9-14
• /
• 2016

In the holographic data storage system, the data can be stored more than one bit per pixel and the storage capacity and transmission rate can be increased. In this paper, we proposed a sparse-ON pixel 4/6 balanced-modulation code that the code rate is 1.33 (bit/pixel) with uniform page density. Even though the performance of the proposed sparse-ON pixel 4/6 balanced-code is similar to 2/3 and 6/9 modulation codes, it can increase the storage capacity more than these modulation codes and also store more pages in a volume by reducing the rate of ON pixels to mitigate IPI (inter-page interference).

• Korean Journal of Agricultural Science
• /
• v.44 no.4
• /
• pp.477-486
• /
• 2017

This review provides an overview of dietary nucleotides as an alternative to in-feed antibiotics for weaning pigs. Dietary nucleotides are composed of DNA or RNA molecules and are normally contained in protein-rich feed ingredient, brewer's yeast, yeast extract, and milk. Weaning pigs are suffering from several stresses, such as environmental challenges (i.e. crowding, transportation, and feeding). Such stressors can damage the intestinal epithelium and cause an invasion by Escherichia coli, secondary inflammatory responses, and post weaning diarrhea. To overcome weaning disorder, people often use antibiotics which reduce symptoms and boost growth performance. However, since antibiotics were banned due to concerns of antibiotic resistant bacteria, researchers are studying alternative materials to antibiotics. Dietary nucleotides are one of the alternative materials for replacing antibiotics and can be used in abnormal conditions, such as weaning diarrhea, low digestibility, and disease condition. Nucleotides have substances that have important roles in cell division and cell growth, affecting growth performance, intestinal condition, and immunological effect at the weaning stage. However, nucleotides' composition is very different between sources and this aspect makes it difficult to utilize nucleotides at the weaning stage. Therefore, this review paper focuses on i) the characteristics and functions of dietary nucleotides and ii) the effect of dietary nucleotides on the growth performance and immune system of pigs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2492-2512
• /
• 2018

Multicast communication can effectively reduce network resources consumption in contrast with unicast. With the advent of SDN, current researches on multicast traffic are mainly conducted in the SDN scenario, thus to mitigate the problems of IP multicast such as the unavoidable difficulty in traffic engineering and high security risk. However, migration to SDN cannot be achieved in one step, hybrid SDN emerges as a transitional networking form for ISP network. In hybrid SDN, for acquiring similar TE and security performance as in SDN multicast, we redirect every multicast traffic to an appropriate SDN node before reaching the destinations of the multicast group, thus to build up a core-based multicast tree substantially which is first introduced in CBT. Based on the core SDN node, it is possible to realize dynamic control over the routing paths to benefit traffic engineering (TE), while multicast traffic manageability can also be obtained, e.g., access control and middlebox-supported network services. On top of that, multiple core-based multicast trees are constructed for each multicast group by fully taking advantage of the routing flexibility of SDN nodes, in order to further enhance the TE performance. The multicast routing and splitting (MRS) algorithm is proposed whereby we jointly and efficiently determine an appropriate core SDN node for each group, as well as optimizing the traffic splitting fractions for the corresponding multiple core-based trees to minimize the maximum link utilization. We conduct simulations with different SDN deployment rate in real network topologies. The results indicate that, when 40% of the SDN switches are deployed in HSDN as well as calculating 2 trees for each group, HSDN multicast adopting MRS algorithm can obtain a comparable TE performance to SDN multicast.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.3
• /
• pp.765-774
• /
• 2018

As the IT technology develops, the military information system develops to the current IT environment for efficient operation and rapid communication, and the threat of cyber attack against the advanced weapon system using network technology is increasing simultaneously. In order to prevent and mitigate these problems, the United States has applied the cybersecurity test evaluation system from the beginning to the beginning of weapon system development. However, in Korea, the evaluation process of cyber security test is weak, and there is concern about the damage due to cyber attack. In this paper, we analyze cybersecurity test evaluation status of U.S. and domestic weapon systems and propose a solution to the problem of cybersecurity test evaluation system.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.743-749
• /
• 2014

Even if many studies for the prevention of accidents in chemical plant have been carried out, recently more severe accidents in chemical plants have occurred continuously. These have a large potential impact and the loss of casualties and economic can vary according to the activities of early emergency responses. Thus, in order to mitigate the impact of accidents, the studies preparing the guidelines for emergency response have to be urgently needed. In this study, the current emergency responses guidelines and regulations in Korea were investigated to find out the drawbacks. And, to tackle these, BCP(Business continuity plan) method was used to improve the activities of early emergency responses as suggesting the basic components, response steps, feedback and procedures of the emergency responses.

• Journal of Hydrogen and New Energy
• /
• v.26 no.6
• /
• pp.609-628
• /
• 2015

Thie study presents the biomass-derived jet (bio-jet) fuel production technologies for greenhouse gas (GHG) reduction in aviation sector. The aviation sector is responsible for the 2% of the world anthropogenic $CO_2$ emissions and the 10% of the fuel consumption: airlines' costs for fuel reach 30% of operating costs. In addition, the aviation traffic is expected to double within 15 years from 2012, while fuel consumption and $CO_2$ emissions should double in 25 years. Biojet fuels have been claimed to be one of the most promising and strategic solutions to mitigate aviation emissions. This jet fuel, additionally, must meet ASTM International specifications and potentially be a100% drop-in replacement for current petroleum jet fuel. In this study, the current technologies for producing renewable jet fuels, categorized by alcohols-to-jet, oil-to-jet, syngas-to-jet, and sugar-to-jet pathways are reviewed for process, economic analysis and life cycle assessment (LCA) on conversion pathways to bio-jet fuel.

• Smart Structures and Systems
• /
• v.16 no.4
• /
• pp.701-723
• /
• 2015

Friction isolators are one of the most important types of bearings used to mitigate damages of earthquakes. The adaptive behavior of these isolators allows them to achieve multiple levels of performances and predictable seismic behavior during different earthquake hazard levels. There are three main types of friction isolators. The first generation with one sliding surface is known as Friction Pendulum System (FPS) isolators. The double concave friction pendulum (DCFP) with two sliding surfaces is an advanced form of FPS, and the third one, with fully adaptive behavior, is named as triple concave friction pendulum (TCFP). The current study has been conducted to investigate and compare seismic responses of these three types of isolators. The structure is idealized as a two-dimensional single degree of freedom (SDOF) resting on isolators. The coupled differential equations of motion are derived and solved using state space formulation. Seismic responses of isolated structures using each one of these isolators are investigated under seven near fault earthquake motions. The peak values of bearing displacement and base shear are studied employing the variation of essential parameters such as superstructure period, effective isolation period and effective damping of isolator. The results demonstrate a more efficient seismic behavior of TCFP isolator comparing to the other types of isolators. This efficiency depends on the selected effective isolation period as well as effective isolation damping. The investigation shows that increasing the effective isolation period or decreasing the effective isolation damping improves the seismic behavior of TCFP compared to the other isolators. The maximum difference in seismic responses, the base shear and the bearing displacement, for the TCFP isolator are calculated 26.8 and 13.4 percent less than the DCFP and FPS in effective isolation damping equal to10%, respectively.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.152-162
• /
• 2016

Electrical resistivity tomography (ERT) is a technique to reconstruct the internal resistivity distribution using the measured voltages on the surface electrodes. ERT inverse problem suffers from ill-posedness nature, so regularization methods are used to mitigate ill-posedness. The reconstruction performance varies depending on the type of regularization method. In this paper, an interacting dual-mode regularization method is proposed with two different regularization methods, L1-norm regularization and total variation (TV) regularization, to achieve robust reconstruction performance. The interacting dual-mode regularization method selects the suitable regularization method and combines the regularization methods based on computed mode probabilities depending on the actual conditions. The proposed method is tested with numerical simulations and the results demonstrate an improved reconstruction performance.

• The Korean Journal of Applied Statistics
• /
• v.31 no.4
• /
• pp.497-505
• /
• 2018

Attacking computer systems using ransomware is very common all over the world. Since antivirus and detection methods are constantly improved in order to detect and mitigate ransomware, the ransomware itself becomes equally better to avoid detection. Several new methods are implemented and tested in order to optimize the protection against ransomware. In our work, 582 of ransomware and 942 of normalware sample data along with 30,967 dynamic action sequence variables are used to detect ransomware efficiently. Several variable selection techniques combined with various machine learning based classification techniques are tried to protect systems from ransomwares. Among various combinations, chi-square variable selection and random forest gives the best detection rates and accuracy.

• Geomechanics and Engineering
• /
• v.16 no.4
• /
• pp.435-448
• /
• 2018

In order to make reliable earthquake-resistant design of civil engineering structures, one of the most important considerations in a region with high seismicity is to pay attention to the local soil condition of regions. It is aimed in the current study at specifying dynamic soil characteristics of Kirikkale city center conducting the 1-D equivalent linear and non-linear site response analyses. Due to high vulnerability and seismicity of the city center of Kirikkale surrounded by active many faults, such as the North Anatolian Fault (NAF), the city of Kirikkale is classified as highly earthquake-prone city. The first effort to determine critical site response parameter is to perform the seismic hazard analyses of the region through the earthquake record catalogues. The moment magnitude of the city center is obtained as $M_w=7.0$ according to the recorded probability of exceedance of 10% in the last 50 years. Using the data from site tests, the 1-D equivalent linear (EL) and nonlinear site response analyses (NL) are performed with respect to the shear modulus reduction and damping ratio models proposed in literature. The important engineering parameters of the amplification ratio, predominant site period, peak ground acceleration (PGA) and spectral acceleration values are predicted. Except for the periods between the period of T=0.2-1.0 s, the results from the NL are obtained to be similar to the EL results. Lower spectral acceleration values are estimated in the locations of the city where the higher amplification ratio is attained or vice-versa. Construction of high-rise buildings with modal periods higher than T=1.0 s are obtained to be suitable for the city of Kirikkale. The buildings at the city center are recommended to be assessed with street survey rapid structural evaluation methods so as to mitigate seismic damages. The obtained contour maps in this study are estimated to be effective for visually characterizing the city in terms of the considered parameters.