• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.206-221
• /
• 2019

Source localization in three-dimensional (3-D) wireless sensor networks (WSNs) is becoming a major research focus. Due to the complicated air-ground environments in 3-D positioning, many of the traditional localization methods, such as received signal strength (RSS) may have relatively poor accuracy performance. Benefit from prior learning mechanisms, fingerprinting-based localization methods are less sensitive to complex conditions and can provide relatively accurate localization performance. However, fingerprinting-based methods require training data at each grid point for constructing the fingerprint database, the overhead of which is very high, particularly for 3-D localization. Also, some of measured data may be unavailable due to the interference of a complicated environment. In this paper, we propose an efficient kernel based 3-D localization algorithm via tensor completion. We first exploit the spatial correlation of the RSS data and demonstrate the low rank property of the RSS data matrix. Based on this, a new training scheme is proposed that uses tensor completion to recover the missing data of the fingerprint database. Finally, we propose a kernel based learning technique in the matching phase to improve the sensitivity and accuracy in the final source position estimation. Simulation results show that our new method can effectively eliminate the impairment caused by incomplete sensing data to improve the localization performance.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.181-195
• /
• 2019

This study aims to analyze the spatial context by analyzing the flow characteristics of the walking tour course and visualizing effectively using the floating population data constructed through the communication data. The floating population data refinement algorithm was developed for estimation flow population along the road and the floating population data for each walking tour courses was constructed. In order to adopt the algorithm for forming suitable for the analysis of the walking tour courses, the estimation of floating population considering the area of the road and the estimation of floating population considering the value of floating population around the road were compared. As a result, the estimation of floating population considering ambient the values of flow population was adopted, which is more appropriate to apply analysis method due to the relatively consistent data. Then, a datamining algorithm for walking tour course was constructed according to the characteristics of the floating population data, the absence of missing values. Finally, this study analyzed the flow characteristics and spatial patterns of 18 walking trails in Seoul through the floating population data according to walking tour course. To do this, the kernel density analysis and the Getis-Ord $G^*_i$ statistical hotspot analysis were applied to visualize the main characteristics of each walking tour course.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.511-518
• /
• 2011

Truck weight data are essential for road infrastructure design, maintenance and management. WIM (Weigh-In-Motion) system provides highway planners, researchers and officials with statistical data. Recently high speed WIM data also uses to support a vehicle weight regulation and enforcement activities. This paper aims at developing axle load estimating models with high speed WIM data collected from national highway. We also suggest a method to estimate axle load using simple regression model for WIM system. The model proposed by this paper, resulted in better axle load estimation in all class of vehicle than conventional model. The developed axle load estimating model will used for on-going or re-calibration procedures to ensure an adequate level of WIM system performance. This model can also be used for missing axle load data imputation in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.952-958
• /
• 2014

In this paper, we propose a parametric sparse recovery algorithm(SRA) applied to a radar signal model, based on the compressive sensing(CS), for the ISAR(Inverse Synthetic Aperture Radar) image reconstruction from an incomplete radar-cross-section(RCS) data and for the estimation of rotation rate of a target. As the SRA, the iteratively-reweighted-least-square(IRLS) is combined with the radar signal model including chirp components with unknown chirp rate in the cross-range direction. In addition, the particle swarm optimization(PSO) technique is considered for searching correct parameters related to the rotation rate. Therefore, the parametric SRA based on the IRLS can reconstruct ISAR image and estimate the rotation rate of a target efficiently, although there exists missing data in observed RCS data samples. The performance of the proposed method in terms of image entropy is also compared with that of the traditional interpolation methods for the incomplete RCS data.

• International Journal of Quality Innovation
• /
• v.8 no.3
• /
• pp.1-10
• /
• 2007

A sample of Italian manufacturing companies was selected in order to verify the abilities and effects (relationships) of the management factors human resources, leadership and strategic planning on company performance. The Partial Least Squares (PLS) estimation method was used for analyzing the data collected, where the relationships between the management factors and performance were formalized by a Structural Equation Model (SEM). The analysis of the survey data showed unexpected result regarding the non significant direct relationship between Leadership and Performance. The effect of Leadership is obtained by an indirect relationship through Human Resources. The combination of Leadership and Human Resources has hence been identified as the management factors which have the highest impact on the performance of Italian industrial companies. Another interesting and unexpected result was that there was no significant impact of Strategic Planning on Performance. It seems that the leaders of Italian industrial companies have not understood that good strategic planning is a necessary condition for achieving excellence. So another improvement area is in fact Strategic Planning. This area should have the highest priority of any top management team and the focus should include how to establish a strong relationship between strategic planning and performance. No correlation between strategic planning and performance is a strong indication that something is wrong. It is not enough that Leadership is doing Strategic Planning-Leadership is also about studying and follow up on results in order to assure impacts on performance. This link seems to be missing in Italian industrial companies.

• Child Health Nursing Research
• /
• v.13 no.1
• /
• pp.13-20
• /
• 2007

Purpose: This investigation examined a model to predict body mass index in order to prevent later development of obesity among adolescents. The hypothesized model was developed based on the principle of Social Cognitive Theory that social influences predict perceptions of cognition as well as behavior. Method: The 5,770 adolescents, aged 14-18 who participated in this study came from 11 separate school districts in Busan and Kyungnam province of South Korea. The adolescent surveys were administered in a group setting at the participating school. Of the 5770 surveys, adolescents with more than 10 percent missing data in the entire survey were excluded. The final sample contained 4,527 cases. The adolescents were included 2,250 (49.7%) males and 2,277 (50.3%) females. Data was analyzed Pearson correlation coefficients using SPSS 12 program and structural equation model (SEM) using Maximum Likelihood estimation was employed using Amos 5.0. Results: Social support directly affects cognitive determinants. Cognitive determinants directly affect behavior determinants which directly affect BMI. Cognitive and behavioral factors mediated the relationship between social support and BMI (GFI= 0.984, CFI= 0.974, RMSEA=0.031). Conclusion: Social levels should be supportive to help adolescents have healthier behaviors. This support can be accomplished by providing frequent support to establish positive cognitive factors as the foundation of the solution to prevent overweight and obesity.

• Geophysics and Geophysical Exploration
• /
• v.3 no.1
• /
• pp.7-12
• /
• 2000

The paper discusses a data processing methodology that derives a three dimensional porosity volume information from the 3-D seismic dataset. The methodology consists of preprocessing and inversion procedures. The purpose of the preprocessing is balancing the amplitudes of seismic traces by using reflectivity series derived from sonic and density logs. There are eight sonic logs are available in the study area; therefore, we can compute only 8 balance functions. The balance function for every seismic trace was derived from these 8 balance functions by kriging. In order to derive a wide-band acoustic impedance --similar to the one can be derived from a sonic log- from a band-limited reflection seismogram, we need to recover missing low- and high-frequency information of the seismic trace. For that Purpose we use the autoregressive method.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.241-242
• /
• 2016

Recent abnormal climate change induces localized heavy rainfall and extreme disasters such as debris flow near urban area. Thus many researches have been conducted to estimate and prevent, especially in focus of physical behavior of debris flow. Even though it is hardly to consider overall related parameters to estimate the extent and degree of directly or indirectly damages due to debris flow. Those analytic restraint would be caused by the diversity and complexity of regional topographic and hydrodynamic characteristics of debris flow inside. We have utilized the Bayesian method to compensate the uncertainty due to the complex characteristics of it after analyzing the numerical results from FLO-2D and field measurement data. Revised values by field measurements will enhance the numerical results and the missing parameters during numerical simulation will be supplemented with this methodology. As a final outcome in this study, the risk index of debris flow damage will be suggested to provide quantitative estimation in terms of hazard protection including the impact on buildings, especially in inner and outer of urban area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.135-135
• /
• 2020

우리나라의 기후 자료는 일반적으로 기상청에서 발표하는 종관기상관측(ASOS)과 방재기상관측(AWS), 그리고 북한이 세계기상기구(WMO, World Meteorogical Organization)의 기상통신망(GTS)을 통해 보낸 북한기상관측(NKO)을 사용 할 수 있다. 그러나 이 중 40년 이상의 완전한 관측 자료를 얻을 수 있는 건 ASOS가 유일하지만 공간적인 표현에 한계를 갖고 있다. AWS는 관측소가 많다는 장점이 있지만 관측 기간이 길지 않고 이용 가능한 기간에도 관측이 연속적이지 못한 경우가 많다. NKO는 비록 27개의 관측소가 있지만 많은 데이터가 누락되어 일별 기후자료의 사용에 한계를 갖고 있다. 이러한 미관측 기간이나 관측 자료의 누락은 연속적인 시계열 자료분석을 기반으로 하는 수자원 모델링에 있어서 문제를 야기한다. 본 연구는 1973년부터 2019년까지 47년의 신뢰도 높은 한반도 일일 기후 자료를 구축하기 위해 다양한 방법론을 비교하였다. 추정에 사용한 방법은 총 7개로 EM algorithm for probabilistic principal components (PPCA-EM), Inverse distance weight method (IDWM), Nearest neighbor method (NNM), Multivariate normal copulas (Copula), Elastic net model (Elastic), Ordinary kriging (OK), Regularized principal components with EM algorithm (RPCA-EM)를 살펴보았다. 다양한 형태의 결측치를 가정하여 그 결과값을 비교하였고 이는 Root mean squared error(RMSE), Kling-Gupta efficiency(KGE), Nash-Sutcliffe efficiency(NSE)를 통해 평가하였다. 최종 선택된 방법론을 통하여 한반도 전역을 그리드 기반의 강수 및 최저온도/최고온도의 일별자료로 생성하였다.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.2 s.8
• /
• pp.55-64
• /
• 2002

VEfficient generation of road data is one of the most important issues in GIS (Geographic Information System). In this paper, we propose a hybrid approach for automatic generation of road data by combining mobile mapping and image processing techniques. Mobile mapping systems have a form of vehicle equipped with CCD camera, GPS, and INS. They can calculate absolute position of objects that appear in acquired image by photogrammetry, but it is labor-intensive and time-consuming. Automatic road detection methods have been studied also by image processing technology. However, the methods are likely to fail because of obstacles and exceptive conditions in the real world. To overcome the problems, we suggest a hybrid method for automatic road generation, by exploiting both GPS/INS data acquired by mobile mapping system and image processing algorithms. We design an estimator to estimate 3-D coordinates of road line and corresponding location in an image. The estimation process reduces complicated image processing operations that find road line. The missing coordinates of road line due to failure of estimation are obtained by cubic spline interpolation. The interpolation is done piecewise, separated by rapid change such as road intersection. We present experimental results of the suggested estimation and interpolation methods with image sequences acquired by mobile mapping system, and show that the methods are effective in generation of road data.