• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.169-179
• /
• 1998

Plane mirror type laser interferometers are popularly being used in many modern ultraprecision machines, as they can perform simultaneous measurements of multiple axis positions with nanometer resolution capabilities. One important issue in this application of laser interferometers is to provide a good level of alignment between the reflecting mirrors and the laser beams so that measurement errors due to undesirable coupling effects can be avoided in multiple axis measurements In this investigation, a thorough metrological analysis is given to develop an suitable mathematical model for a precision x-y stage in which the orthogonality misalignment between the reflecting mirrors significantly affects overall x-y mea-surement results. Then a noble calibration method is suggested in which two-dimensional displacement sensors of moire gratings of concentric circles are used to realize the reversal principle of orthogonality evaluation in situ. Finally, actual experimental results are discussed to verify that the suggested method can effectively calibrate the orthogonality error with an uncertainty of 0.2667 arcsec.

• Journal of the Optical Society of Korea
• /
• 제5권4호
• /
• pp.136-139
• /
• 2001

We investigated a high-output ower, periodically poled lithium niobate(PPLN) optical parametric oscillator(OPO) pumped by a Q-switched Nd:YAG laser. Given the low optical damage threshold and the limited aperture (0.5mm thick) of PPLN, we tried to maximize the signal output power in a linear cavity consisting of two flat mirrors with a loosely focused pump beam. It is found that this simple cavity structure allowed a robust OPO operation, which was not sensitive to alignment compared with the conventional ones using concave mirrors. A maximum energy of 100$\mu$J/pulse was achieved for the signal at 1.36${\mu}{\textrm}{m}$, while the oscillation threshold was 0.3 mJ/pulse for the pump at 1064 nm.

• 한국과학교육학회지
• /
• 제32권6호
• /
• pp.1027-1038
• /
• 2012

We investigated the effect of Science Writing Heuristic (SWH) on elementary students' concept formation and their retention. Also we explored the interaction effect of those with scientific attitudes. We developed mirrors/lenses lessons incorporating SWH. An experimental group of fifth grade students (n=25) had been instructed with SWH lessons for six periods while a control group (n=25) taught according to the normal science lessons based on the Korean national curriculum using teacher's guides published by the Ministry of Education. Results of pre- and post-test of understanding the concept of mirrors and lenses showed a positive impact of SWH on both male and female students. However, the retention effect after post-test revealed that SWH only had an effect on female students' scientific attitudes. SWH, therefore, could be an effective teaching approach especially on concept formation, retention effects by fostering female students' scientific attitudes.

• 한국광학회지
• /
• 제9권6호
• /
• pp.373-379
• /
• 1998

3판식 액정 프로젝션 시스템의 색재현 개선을 위한 색분리/합성 광학계의 설계 방법으로서, 다양한 시청 조건하에서 인간의 색지각 특성을 고려하여 색순응과 표시색을 이용한 최적의 색재현 구현에 대해 기술한다. 이를 위해 3차원 균등 색공간에서 재현 색영역의 체적을 성능 지수로 선정하고 이를 최대화시키는 설계 방법을 제안한다. 또한, 3판식 액정 프로젝션 시스템의 색재현 원리와 표색계 모델에 대해 기술하고 최적화 문제를 색채학적으로 제시한 후, 적용 예로서 2종류의 시청 조건에 대해 Dichroic Mirror의 경계 파장의 최적 설계치를 구하였다.

• Journal of the Optical Society of Korea
• /
• 제20권3호
• /
• pp.363-367
• /
• 2016

In this paper, we present a resolution-enhanced computational integral imaging reconstruction method by using boundary folding mirrors. In the proposed method, to improve the resolution of the computationally reconstructed 3D images, the direct and reflected light information of the 3D objects through a lenslet array with boundary folding mirrors is recorded as a combined elemental image array. Then, the ray tracing method is employed to synthesize the regular elemental image array by using a combined elemental image array. From the experimental results, we can verify that the proposed method can improve the visual quality of the computationally reconstructed 3D images.

• 한국광학회지
• /
• 제11권1호
• /
• pp.43-46
• /
• 2000

Kerr 렌즈 모드록킹된 티타늄 사파이어 레이저에서 상용화된 광학부품만을 이용하여 9 fs의 펄스를 생성하였다. 공진기 내부와 출령경을 지나면서 발생하는 군속도 분산을 각각 용융 프리즘 쌍을 이용하여 보상하였고, 넓은 스펙트럼을 얻기 위하여 광대역 거울을 사용하였다. 이전에 사용했던 광대역 거울과 반사율을 비교해 봄으로서 10fs 미만의 극초단 펄스를 생성하기 위해서는 180nm 이상의 넓은 반사대역을 갖는 거울을 선택하는 것이 필수적임을 확인하였다.

• 통합자연과학논문집
• /
• 제4권1호
• /
• pp.11-14
• /
• 2011

Free-standing multilayer distributed Bragg reflectors (DBR) porous silicon dielectric mirrors, prepared by electrochemical etching of crystalline silicon using square wave currents are treated with polymethylmethacrylate (PMMA) to produce flexible, stable composite materials in which the porous silicon matrix is covered with caffeine-impregnated PMMA. Optically encoded free-standing DBR PSi dielectric mirrors retain the optical reflectivity. Optical characteristics of free-standing DBR PSi dielectric mirrors are stable and robust for 24 hrs in a pH 12 aqueous buffer solution. The appearance of caffeine and change of DBR peak were simultaneously measured by UV-vis spectrometer and Ocean optics 2000 spectrometer, respectively.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.248-249
• /
• 2003

The characterization of laser mirrors is important for obtaining proper performance of femtosecond lasers. Characteristics of laser mirrors are usually described in terms of their reflectivity at a certain wavelength. In femtosecond laser applications, however, the dispersion property of the mirror should be considered because the temporal shape of a femtosecond light pulse changes during the reflection at the mirrors. (omitted)

• Journal of the Optical Society of Korea
• /
• 제5권3호
• /
• pp.70-75
• /
• 2001

Next Generation Space Telescope (NGST) is under design study for proposed launch around 2008. It will take over the task of Hubble Space Telescope (HST) and provide much more detailed information about celestial objects. Present large telescopes both in space and on the ground contain aspheric mirrors, called Ritchey-Chretien type. As the size of the telescope becomes larger and the optical quality is requested to be higher, reaching the diffraction limit, more accurate optical testing methods are required. However, there are few testing methods which can achieve the required accuracy for aspheric optics, and none of them has achieved it with certainty. The failure of producing the primary mirror of the Hubble Space Telescope to meet specification is a good example. Moreover, testing aspheric mirrors of large convex form adds the difficulty to extreme. In this paper, space telescopes and large ground-based telescopes are surveyed and testing methods for aspheric optics are reviewed. a method of testing aspheric convex mirrors is suggested.

• 보존과학회지
• /
• 제22권
• /
• pp.87-98
• /
• 2008

본 연구는 한반도에서 출토된 총 24점의 청동거울을 대상으로 합금의 화학조성과 경면처리법에 대하여 주사전자현미경-에너지분산형분석기로 분석한 내용이다. 고려 고분군에서 출토된 2점의 유물을 제외하면 이들에 관련된 출토지나 제작시기는 알려져 있지 않다. 청동거울의 경면처리법으로는 주석함량이 높을 경우 합금자체가 은백색을 띠는 점을 이용하여 연마만으로 마무리하는 방법과, 주석과 수은을 이용하는 주석칠도금법이나 주석아말감도금법, 그리고 수은도금으로 피막처리를 하는 방법 등을 들 수 있다. 일부 거울에서는 경면뿐 아니라 문양면에도 피막처리가 수행된 흔적이 발견되었으며, 일부에서는 경면과 문양면에 서로 다른 처리가 적용된 예가 관찰되었다. 적용된 피막처리법을 추정함에 중요한 단서가 되는 수은의 존재는 거울의 표면에서는 물론 단면에서도 황화물 형태로 확인되었는데 이는 도금층이 결실된 경우에도 표면처리 여부는 물론 그에 적용된 방법에 관한 추정이 가능함을 의미한다. 앞으로 청동거울의 경면처리법에 대한 연구가 계속될 경우 기술의 시대별 또는 지역별 특성이 밝혀지게 될 것이며 이를 바탕으로 한반도에서 출토되는 청동거울의 제작시기나 제작지에 대한 추정이 가능할 것으로 판단된다.