• Wind and Structures
• /
• v.32 no.2
• /
• pp.127-142
• /
• 2021

Wind load acting on a standalone structure is different from that acting on a similar structure which is surrounded by other structures in close proximity. The presence of other structures in the surrounding can change the wind flow regime around the principal structure and thus causing variation in wind loads compared to a standalone case. This variation on wind loads termed as interference effect depends on several factors like terrain category, geometry of the structure, orientation, wind incident angle, interfering distances etc., In the present study, a three building configuration is considered and the mean pressure coefficients on each face of principle building are determined in presence of two interfering buildings. Generally, wind loads on interfering buildings are determined from wind tunnel experiments. Computational fluid dynamic studies are being increasingly used to determine the wind loads recently. Whereas, wind tunnel tests are very expensive, the CFD simulation requires high computational cost and time. In this scenario, Artificial Neural Network (ANN) technique and Support Vector Regression (SVR) can be explored as alternative tools to study wind loads on structures. The present study uses these data-driven approaches to predict mean pressure coefficients on each face of principle building. Three typical arrangements of three building configuration viz. L shape, V shape and mirror of L shape arrangement are considered with varying interfering distances and wind incidence angles. Mean pressure coefficients (Cp mean) are predicted for 45 degrees wind incidence angle through ANN and SVR. Further, the critical faces of principal building, critical interfering distances and building arrangement which are more prone to wind loads are identified through this study. Among three types of building arrangements considered, a maximum of 3.9 times reduction in Cp mean values are noticed under Case B (V shape) building arrangement with 2.5B interfering distance. Effect of interfering distance and building arrangement on suction pressure on building faces has also been studied. Accordingly, Case C (mirror of L shape) building arrangement at a wind angle of 45º shows less suction pressure. Through this study, it was also observed that the increase of interfering distance may increase the suction pressure for all the cases of building configurations considered.

• Journal of Korean Biological Nursing Science
• /
• v.20 no.3
• /
• pp.159-168
• /
• 2018

Purpose: This study aimed to explore nursing students' experiences of observing surgeries in the operating room. Methods: The data were collected through written scripts of nursing students who participated in the operating room practice. Data were analyzed via qualitative content analysis. Results: Five themes emerged from the data: 'preparing with the thrilled hearts toward unknown area', 'drawing back in front of the mirror of realities', 'becoming an audience at a lifesaving orchestra', 'reaching a tipping point of knowing', and 'redrawing the trajectory of dream to be a nurse'. Conclusion: This study will prove helpful in describing their needs for systemic and emotional support. Findings indicated that major contributions of surgical observations to nursing students are more integrated understandings of nursing and the determinations of their career preferences.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.225-228
• /
• 2005

Telescope structure based on Korsch type optical layout was suggested for a large aperture optical system. Korsch type optical layout is regarded as providing wide field of view and no color aberration for which high resolution space cameras greatly demand. For the suggested Korsch type telescope structure, two folding mirrors are adopted, firstly to provide for the refocusing device mounting plane on the second fold mirror assembly, secondly by double folding the light path to concisely confine focal plane assembly within the perimeter of the tube. Optical layput design and corresponding support structure design were attained.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.1
• /
• pp.18-23
• /
• 2006

The purpose of this study and report is to provide, to the MND, an independent cost analysis of modernizing software of F-16 fighter fleets to support the use of several weapon system options, including JDAM, AIM-9X and HARM Targeting System etc. The study analyzed each options with software sizing, software cost, enabling hardware cost, flight test cost, system engineering cost, and 3 strategies. And the study proposed and analyzed some alternative strategies: strategy1 is to modernize software only within existing electronic processing capability; strategy2 is a full upgrade of weapons avionics with plug compatible electronics; strategy3 is an approach defined to mirror the USAF Common Configuration Implementation Approach (CCIP). The recommended alternative is strategy2.

• Journal of Biosystems Engineering
• /
• v.24 no.1
• /
• pp.67-74
• /
• 1999

A prototype cut-flower sorter was developed and tested for its performance with five varieties of roses. Support plates driven by a chain mechanism transported the roses into an image inspection chamber. Color image processing algorithms were developed to evaluate the length, thickness, and straightness of stem and color, height, and maturity of bud. The average absolute errors of the system for the measurements of stem length, stem thickness, and height of bud were 19.7 mm, 0.5 mm, and 3.8 mm, respectively. The results of classification by the sorter were compared with those of a human inspector for straightness of stem and maturity of bud. The classification error for the straightness of stem was 8.6%, when both direct image and reflected image by a mirror were analyzed. The accuracy in classifying the maturity of bud varied among the varieties, the smallest for‘Nobless’(1.5%) and the largest for‘Rote Rose’(13.5%). The time required to process a rose averaged 2.06 seconds, equivalent to the capacity of 1,600 roses per hour.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.40-47
• /
• 2006

Optical performance of the mirror for satellite camera is highly dependent on the adhesive properties of its support. Therefore, in this paper, the adhesive properties of three kinds of space adhesives are investigated. For this purpose, the lap shear test is performed with Zerodur-to-metal lap shear specimen as well as metal-to-metal one. And it is also investigated whether reliable adhesive strength can be secured after the specific thermal cycle. Finally, the properties of three adhesives are compared with each other.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.4
• /
• pp.1441-1456
• /
• 2015

The bidimensional empirical mode decomposition (BEMD) algorithm with high adaptability is more suitable to process multiple image fusion than traditional image fusion. However, the advantages of this algorithm are limited by the end effects problem, multiscale integration problem and number difference of intrinsic mode functions in multiple images decomposition. This study proposes the multiscale self-coordination BEMD algorithm to solve this problem. This algorithm outside extending the feather information with the support vector machine which has a high degree of generalization, then it also overcomes the BEMD end effects problem with conventional mirror extension methods of data processing,. The coordination of the extreme value point of the source image helps solve the problem of multiscale information fusion. Results show that the proposed method is better than the wavelet and NSCT method in retaining the characteristics of the source image information and the details of the mutation information inherited from the source image and in significantly improving the signal-to-noise ratio.

• Korean Journal of Oriental Medicine
• /
• v.15 no.1
• /
• pp.55-62
• /
• 2009

Objectives: Examine the difference of Chosun acupuncture from the acupuncture in Myung, Chung Dynasty Method: This paper examines the acupuncture mentioned in the classic of Introduction to Medicine For this, the special traits of Introduction to Medicine acupuncture was analyzed. Secondly, the research on the contents of Introduction to Medicine acupuncture quoted in the classic of Essential Rhymes of Acupuncture and Moxibustion, Treasured Mirror of Eastern Medicine, and Experimental Prescriptions of Acupuncture and Moxibustion was carried out. Result: Introduction to Medicine put much importance on "method of acupuncture following the five circuits and six qi" (子午流注針法) and Song of Acupuncture and Moxibustion through comparing "eight methods of acupuncture following the five circuits and six qi" (子午八法) and "scattered needling method". The doctors in Chosun Dynasty, howevery, did not adopt this theory with their own standards on acupuncture. On the contrary, they put more importance on the inquiry of historical evidence on river point and extraordinary points. Conclusion: The acupuncture studies of Chosun Dynasty had already formed its own standards on the medical theories, and its direction to which it was headed was different from that of the Myung, and Chung Dynasty in China.

• PNF and Movement
• /
• v.7 no.1
• /
• pp.33-46
• /
• 2009

Purpose : N.A.P.(Neuromuscular Skeletal Plasticity) an integrative neuro-orthopedic concept to facilitate motor strategies in daily life. The primary thesis is, that treatment of body functions and structural impairments should be integrated within goal-oriented activities. The purpose of this article is to demonstrate that the functional activity itself, determines the structure. Material and Methods : A case report of a dentist with brachial plexus lesion after a motor vehicle accident is presented. The necessity for training body functions within relevant tasks is undermined by references which emphasize the importance of training realistic activities to enhance long-term changes in neural representation. Results : The treatment methods presented in this case show significant effects for the patient's ability to participate in his profession within less than a year's time after his motor vehicle accident. Conclusions : Current evidence supports the treatment methods of this concept. The inability to flex his elbow and supinate his forearm placed a considerable doubt to his ability to ever be able to participate in his profession again. Structural reorganization is possible and depends on functional demands, which need to be trained task-specifically. Single case reports may serve as the basis for further randomized controlled studies to support the efficacy of the treatment methods within the N.A.P. concept.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.439-444
• /
• 2011

In this paper, we implemented the intelligent smart monitor system for next generation which is most commonly viewed information in a vehicle from the instrument cluster, where speed, tachometer, fuel, engine temperature, fuel gauge, turn indicators and warning lights and provide the driver with an array of informations. Designed Smart HUD(Head-Up-Display) monitor system is composed TFT LCD, LCD Back light led, plane mirror, lens and controllers parts and it was assembled to intelligent integrated smart monitor system. Finally, we analyze intelligent integrated smart monitor system for driver safety vehicles and present the possibility to apply to smart intelligent HUD total monitor system for next generation.