• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.236-243
• /
• 2022

Monocrystalline silicon has excellent properties, but it is difficult to design and manufacture silicon-based mirrors that can meet engineering applications because of its hard and brittle properties. This paper used monocrystalline silicon as the main mirror material in an imaging system to carry out a feasibility study. The lightweight design of the mirror is completed by the method of center support and edge cutting. The support structure of the mirror was designed to meet the conditions of wide temperature applications. Isight software was used to optimize the feasibility sample, and the optimized results are that the root mean square error of the mirror surface is 3.6 nm, the rigid body displacement of the mirror is 2.1 ㎛, and the angular displacement is 2.5" under the conditions of a temperature of ∆20 ℃ and a gravity load of 1 g. The optimized result show that the silicon-based mirror developed in this paper can meet the requirements of engineering applications. This research on silicon-based mirrors can provide guidance for the application of other silicon-based mirrors.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2732-2741
• /
• 2000

Combination of magnetic recording technology and optical recording technology such as Near Field Optical Recording is watched recently. In order to accomplish this technology, the development of an electromagnetic driven mm-sized mirror shifting laser beam in track direction have to needed. In Near Field Optical Recording System, shifting laser beam in track direction mean as fine tracking and means as coarse tracking. Therefore in Near Field Optical Recording, 2-stage actuator is composed of servo controller in reading or recording information on disc layer. In our research, through design and simulation process of driven mm-sized mirror, we arrange systematically design process of driven mm-sized mirror having good frequency transfer characteristics. Design and simulation processes included modal analysis of spring, calculation of magnetic moment according to the number of turns and geometric configuration of coil and magnetic circuit analysis meaning that calculation of magnetic flux density in air gap of magnetic circuit. After that we design and make parts of driven mm-sized mirror, assemble and evaluate our electriomagnetic driven mm-sized mirror. we compared design values with actual characteristic values and present solution scheme. Through these processes we performed manufacturing of an electromagnetic driven mm-sized mirror having good frequency-domain characteristics and high sensitivity characteristics.

• Journal of the Optical Society of Korea
• /
• 제20권4호
• /
• pp.481-487
• /
• 2016

This study presents a new optical system for a combiner-type head-up display (HUD) with a cylindrical lens as an asymmetrical aberration corrector, instead of a freeform mirror. In the initial design process based on off-axial aberration analysis, we obtain an off-axis two-mirror system corrected for linear astigmatism and spherical aberration by adding a conic secondary mirror to an off-axis paraboloidal mirror. Thus, since the starting optical system for an HUD is corrected for dominant aberrations, it enables us to balance the residual asymmetrical aberrations with a simple optical surface such as a cylinder, not a complex freeform surface. From this design process, an optical system for an HUD having good performance is finally obtained. The size of the virtual image is 10 inches at 2 meters away from a combiner, and the area of the eye box is 130×50 mm².

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 2부
• /
• pp.345-350
• /
• 2006

거울은 자동적인 시각적 피드백이라는 특성으로 특별한 조작을 요구하지 않는 인간의 친숙한 도구이다 디지털 기술의 발달로 우리는 빚과 정보를 함께 전달하는 거울에 대한 여러 가지 접근들을 보아왔지만, 이와 관련된 제품화는 아직 초기단계이다. 또한, 거울의 기본적 특성에 정보가 표현되는 것이 기능적인 측면에 초점이 맞춰져 있어서, 사용자 관점의 정보 표현방식이나 조작에 관련된 인터페이스가 필요하게 되었다. 본 논문은 디지털 거울에서 사용자 관점의 정보 표현방식과 조작 인터페이스 요소 추출을 위한 기반조사로써, 거울과 사용자와의 거리에 따른 사용자의 거울 사용행태와 니즈를 알고자 하는 것을 목적으로 한다. 이를 위하여 일반 전선거울을 보는 사용자의 관찰조사를 실시하고, 이를 바탕으로 거리의 기준을 잡아 태스크를 정리한 후, 주어진 디지털 정보에 대하여 사용자의 거울 사용행태 및 니즈를 추출한다. 연구 결과를 토대로, 향후 디지털 거울에서 사용자 관점의 다양한 정보 표현방식과 조작 인터페이스 요소의 적용 가능성을 Digital Mirror UI 제안을 통해 살펴본다. 나아가 추출된 사용행태 및 니즈의 분석을 통해 정보의 표현방식과 정보조작방식의 방향을 예상할 수 있다.

• 한국광학회지
• /
• 제11권4호
• /
• pp.246-249
• /
• 2000

고해상도 원격관측용 카메라오 설계된 비축 3반사 광학계의 제3거울인 타원면(원추계수>0) 형상측정 Null 렌즈를 설계하였다. Null 렌즈 설계방식으로는 측정감도는 2배로 높으면서 작은 기준 평면경을 사용하는 혼합방식을 제안하였다. 혼합방식과 autostigmatic 방식으로 설계한 Null 렌즈의 광파면 왜곡 민감도를 비교하여 혼합방식이 보다 유리한 Null 측정 광학게임을 제시하였다.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.184-192
• /
• 2009

There are total eight degrees of freedom in designing a three-mirror system. If we correct four kinds of third order aberrations and the system should have the specified effective focal length, the remaining three degrees of freedom can be used for selecting a suitable configuration for a specific application. We suggest an analytic design procedure for a three-mirror telescope system which has a suitably sized secondary mirror and proper separations between mirrors, and is corrected for four kinds of third order aberrations, spherical aberration, coma, astigmatism, and field curvature. Two design examples are shown. One has a compact configuration with off-axial field, the other has relatively long configuration with annular ring field.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.112-121
• /
• 2011

To lead lighting inside, design solution and mechenical solution can be used.A inner court and atrium are samples for design solution. However, physical and environmental elements for building design are not taken positively into consideration. So low position of the inner court is difficult to reach lighting performance and a urban landscape gets damaged. On this study, selecting a building with a inner court, best design method is suggested to apply reflecting mirror. building direction, building shape and solar position are considered to deside the setting angle for reflecting mirror. Performance for the setting reflecting mirror is verified through various simulation cases, and is got more lighting performance than the present situation on the building inside.

• 한국광학회지
• /
• 제24권3호
• /
• pp.111-119
• /
• 2013

대구경 비구면 거울은 대형 천체 망원경이나 고해상도 위성 카메라 등에 사용하는 핵심부품이다. 일반적인 디지털 카메라와 비교하면 매우 크므로 설계 및 제작이 같은 크기의 구면거울보다 훨씬 어렵다. 특히 경량화가 많이 될수록 중력이나 온도변화와 같은 외부의 힘에 의한 변형이 쉽게 발생하기 때문에 이러한 효과를 줄여주는 광기계 설계 및 해석이 더욱 중요해진다. 지상용과 우주용은 사용 환경에 차이가 있어서 설계 요구조건이 달라지고 이에 따라 지지구조물이나 반사경의 경량화 모양 등에 많은 차이가 있다. 본 논문에서는 대구경 비구면 광학기술가운데 가장 어려운 광기계 설계에 관하여 지상용과 우주용으로 나누어 자세히 설명하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.559-564
• /
• 2001

The design of an automobile mirror actuator system needs a systematic optimization due to several variables, constraints, geometric limitations, moving angle, and so on. Therefore, this article provides the procedure of a genetic algorithm(GA) based optimization with finite element analysis for design of a mirror actuator considering design constraints, geometric limitations, moving angle. Local optimum problem in optimization design with sensitivity analysis is overcome by using zero-order overall searching method which is new optimization design method using a genetic algorithm.

• 전자공학회논문지A
• /
• 제29A권3호
• /
• pp.41-46
• /
• 1992

In this paper we report how to design integrated-mirror etalons for surface-emitting lasers and photonic switching without time-consuming numerical calculation. It consists of the following two-step process (step 1) find the minimum reflectance to achieve the maximum allowable linewidth. (step 2) find the number of the quarter-wave layers in each mirror to realize the reflectance given by step 1. The condition for maximum transmission in an integrated- mirror etalon is also derived. Under this condition we can achieve the required linewidth with the minimum number of quarterwave layers.