• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.586-591
• /
• 2005

We deal with the headway which effects on the performance of the PRT(Personal Rapid Transit) system and the system safety. The headway, time between passage of one vehicle and the next, is one of the important factors to assess the line capacity, which has a cue to solve the problem of the congestion in public transportation. To decide the headway there are many important factors, especially such as the failure vehicle deceleration rate, the following simple analytical equation can be made to assess the relation between the line speed and the minimum headway. In this paper we employ a numerical analysis method using a simple analytical equations for the evaluation of the minimum headway and show simple simulation results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.251-258
• /
• 2006

This study is to develop an estimation method of freeway design capacity through the analysis of time headway distribution in continuum flow. Traffic flow-speed diagram and time headway distribution plotted from individual vehicle data shows: a) a road capacity is not deterministic but stochastic, b) time headway distribution for each vehicle speed group follows pearson type V distribution. The freeway design capacity estimation model is developed by determining a minimum time headway for capacity with stochastic method. The estimated capacity values for each design speed are lower when design speed ${\leq}80km/h$, and higher when design speed ${\geq}106km/h$ in comparison with HCM(2000)'s values. In addition, The distinguish difference is that this model leads flexible application in planning level by defining the capacity as stochastic distribution. In detail, this model could prevent a disutility to add a lane for only one excess demand in a road planning level.

• International Journal of Railway
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2016

In order to achieve a comprehensive utilization of railway networks, it is necessary to accurately assess the timetable indicators that effect the train operation. This paper describes the parameter calibration for two timetable indicators: scheduled running time and scheduled dwell time. For the scheduled running time, an existing model is employed and the single timetable parameter (percentage of minimum running time) in that model is optimized. For the scheduled dwell time, two intrinsic characteristics: the significance of stations and the average headway at each station are proposed firstly to form a new model, and the corresponding timetable parameters (the weight of the significance and the weight of the average headway) are calibrated subsequently. The Floyd Algorithm is used to obtain the connectivity among stations, which represents the significance of the stations. A case study is conducted in a light rail transportation system with 17 underground stations. The results of this research show that the optimal value of the scheduled running time parameter can be automatically determined, and the proposed model for the scheduled dwell time works well with a high coefficient of determination and low relative root mean square error through the leave-one-out validation.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.55-73
• /
• 1994

The objective of this research is to evaluate the pedestrian signal time involving green and flashing green times. The minimum pedestrian green indication should give time for pedestrian to start crossing safely, and the flashing green indication should give time to complete the crossing. An average pedestrian crossing speed of 1.1(m/s) was estimated by analyzing the field data which was slower than the 1.2(m/s) currently used. Furthermore, the study proposed that design speed for the flashing green time should be slow speed for considerations pedestrian safety, not the average speed. The 0.78-1.01(m/s) of pedestrian speed was estimated at the elementary school areas that indicated 0.2(m/s) slower than the other areas. The pedestrian starting time (perception/reaction time) and time headway from front to back of herd was estimated to determine minimum pedestrian green time. the pedestrian starting time was estimated to determine minimum pedestrian green time. The pedestrian starting time was ranged 2.52-4.29 seconds. The time interval between the pedestrian rows was found to be 1.25-1.86 seconds, which declines as the pedestrian rows increases, The equation to calculate the pedestrian signal, which declines as the pedestrian rows increases. The equation to calculate the pedestrian signal time is proposed using the pedestrian starting time, the time interval between the pedestrian rows, and pedestrian crossing speed given area types (commercial, business, mixed, and elementary school areas), number of both-directional pedestrians for a cycle, crosswalk length and width.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.953-960
• /
• 2009

In the major operation section of urban railway, there has been occurred habitual delay, and delay propagation and spread to consecutive trains. Therefore, this delay cause the increase of operation time and irregular operation, also the increase of crowd and inconvenience to passengers. The railway operation plan is a promise to passengers and must have reliability. In the case of high frequency urban operation, dwell time have considerable influence on operational headway, so it is very important to efficiently plan and control the dwell time at stations. In this paper, the survey of the research on dwell time for urban railways is presented. The practical estimation model for minimum required dwell time, and the numerical example and validity are proposed.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1848-1859
• /
• 2011

A subsidiary-main track for passenger station is a low-speed track section distinct from a through route such as a main track. It is parallel to a through track and connected to it at both ends by switches. Sidetracks allow for fast, high priority trains to pass slower or lower priority trains going the same direction. They are important for efficiency to order and organize the flow of rail traffic. In this paper we first describe the minimum headway between trains using the concept of occupation time in a block section, which depends on block systems, signalling system and safety technology. And then a stepwise approach is presented to select station, which is suitable to install sidetrack for a given train-traffic pattern. This approach is tested with sample example data, which are surveyed from track geometry based on the to-be-constructed line.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.438-442
• /
• 2003

For an efficient sliding mode control system stability and chattering avoidance should be guaranteed. A continuation method using boundary layer is well known as one solution for this. However since not only model uncertainties and disturbances but also control task itself is variable. it is practically impossible to set controller parameters - control discontinuity, control bandwidth, boundary layer thickness - in advance. In this paper first an adaptation law of control discontinuity is introduced to assure system stability and then fuzzy logic based tuning algorithm of design parameters is applied based on monitored performance indices of tracking error, control chattering, and model precision. In the end maximum control bandwidth not exciting unmodeled dynamics and minimum control discontinuity, boundary layer thickness making system stable and free of chattering are found respectively. This eliminates control chattering and enhances control accuracy as much as possible under given control situation. In order to demonstrate the validity of the proposed algorithm safe headway maintenance control for autonomous transportation system is simulated. The control results show that the proposed algorithm guarantees system stability all the time and tunes control parameters consistently and in consequence implements an efficient control in terms of both accuracy and actuator chattering.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.142-155
• /
• 2017

It is anticipated that, in cases in which different train operators share railway network, conflicts may occur among train operators with regard to train operation rate, train priorities, and arrival and departure time; besides this, during times when there is high demand for trains, operators will request train operations intensively, steadily increasing train conflict phenomena. In the present study, train operation sequence, minimum headway, arrival and departure time, train priorities, etc., were analyzed, and while using train departure times as decision variables in variably given train schedules, by adjusting train time requested by train operators, and finally rejecting the train times in cases in which conflict resolution is impossible, so that various constraints can be satisfied, a train slot allocation model was suggested to find the objective function, that is, the maximum number of train slots that can be practically applicable to railway operation.

• Proceedings of the KOR-KST Conference
• /
• 1996.02a
• /
• pp.59-86
• /
• 1996

Current methods for evaluating unsignalized intersections, and estimating level-of-service (LOS) is determined from efficiency-based criteria such as little or no delay to very long delays. At present, similar procedures to evaluate intersections using safety-based criteria do not exist. The improvement of sight distances at intersections is the most effective way of improving intersection safety. However, a set of procedures is necessary to account for the limitations in current methodology. Such an approach would build upon such methods, but also account for: deficiencies in the current deterministic solution for the determination of intersection sight distances; opportunity for an accident and severity of an accident; and cost-effectiveness of attaining various levels of sight distances. In this research, a model that estimates the degree of safety at two-way stop-controlled intersections is described. Only crossing maneuvers are considered in this study because accidents caused by the crossing maneuvers are the dominate type among intersection accidents. Monte Carlo methods are used to estimate the hazard at an intersection as a function of roadway features and traffic conditions. Driver`s minimum gap acceptance in the crossing vehicles and headway distribution on the major road are used in the crossing vehicles and headway distribution on the major road are used in the model to simulate the real intersectional maneuvers. Other random variables addressed in the model are: traffic speeds; preception-reaction times of both drivers in the crossing vehicles and drivers in oncoming vehicles on the major road; and vehicles on the major roads. The developed model produces the total number of conflicts per year per vehicle and total potential kinetic energy per year per vehicle dissipated during conflicts as measurements of safety at intersections. Based on the results from the developed simulation model, desirable sight distances for various speeds were determined as 350 feet, 450 feet and 550 feet for 40 mph, 50 mph and 60 mph prevailing speed on the major road, respectively. These values are seven to eight percent less than those values recommended by AASHTO. A safety based level-of-service (LOS) is also developed using the results of the simulation model. When the total number of conflicts per vehicle is less than 0.05 at an intersection, the LOS of the intersection is `A' and when the total number of conflicts per vehicle is larger than 0.25 at an intersection, the LOS is `F'. Similarly, when the total hazard per vehicle is less than 350, 000 1b-ft2/sec2, the LOS is `F'. Once evaluation of the current safety at the intersection is complete, a sensitivity analysis can be done by changing one or more input parameters. This will estimate the benefit in terms of time and budget of hazard reduction based upon improving geometric and traffic characteristics at the intersection. This method will also enable traffic engineers in local governments to generate a priority list of intersection improvement projects.