• 제목/요약/키워드: minimum requirement

검색결과 406건 처리시간 0.026초

포/포탑 구동장치의 모드 스위칭 제어기 설계 (Mode Switching Control Design for Gun/Turret Driving System)

  • 백승문;김지영;임정빈;유준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.33-37
    • /
    • 2004
  • To meet an increasing demand for high performance in gun dynamic plant, both a precise and a fast response positioning are strongly required for the gun servomechanism control. A mode switching control(MSC) system, which includes a fine stabilizing controller, fast positioning one and a switching function, is widely used to meet this requirement. Stabilization is performed through PID controller, while proximate time optimal servo(PTOS) is used for target designation. Because gun dynamic have large damping comparing to acceleration, PTOS algorithm with damping is newly derived. This paper adopts the initial value compensation method that improve the transient response after switching. Some simulation results are given to show the effectiveness of our scheme.

  • PDF

반응수정계수의 영향에 따른 철골조 빌딩의 내진 성능 평가 (Performance Evaluation of Steel Moment Frame Buildings with Different Response Modification Factors)

  • 이기학
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2006년도 학술발표회 논문집
    • /
    • pp.201-208
    • /
    • 2006
  • This study lotuses on the seismic behavior of 3-, 9-, and 20-story steel moment resisting frame (MRF) structures designed in accordance with the 2000 International Building Code using different Response Modification factors (R factors) 8, 9, 10, 11, and 12. For a detailed case study, 30 different structures were evaluated for twenty ground motions representing the hazard level which is equal to a 2% probability exceeding in 50 years (2% in 50 years). The results showed that the current R factors provide conservative designs for the 3- and 9-story buildings for the Collapse Prevention performance objective. However, the 20-story buildings designed without using the minimum requirement of spectral acceleration CS prescribed in the IBC 2000 did not satisfy the seismic performance for Collapse Prevention performance.

  • PDF

Reassessment on SEBAL Algorithm and MODIS Products

  • 오랑치맥 솜야;권현한;김현묵;김윤희
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2016년도 학술발표회
    • /
    • pp.230-230
    • /
    • 2016
  • Hydrological modeling is a very complex task dealing with multi-source of data, but it can be potentially benefited from recent improvements and developments in remote sensing. The estimation of actual land surface evapotranspiration (ET), an important variable in water management, has become possible based entirely on satellite data. This study adopted a Surface Energy Balance Algorithm for Land (SEBAL) with the use of MODerate Resolution Imaging Spectrometer (MODIS) satellite products. The SEBAL model is one of the commonly used approach for the ET estimation. A primary advantage of the SEBAL model is rather its minimum requirement for ground-based weather data. The MODIS provides ET (MOD16) product that is based on the Penman-Monteith equation. This study aims to further develop the SEBAL model by employing a more rigorous parameterization scheme including the estimation of uncertainty associated with parameter and model selection in regression model. Finally, the proposed model is compared with the existing approaches and comprehensive discussion is then provided.

  • PDF

도시철도 지능형 카메라에 요구되는 성능 및 관련기술 연구 (Analysis of the Requirement on the Intelligent CCTV Camera in Subway Environment)

  • 장일식;박종화;김주선;김형민;박구만
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 추계학술대회 논문집
    • /
    • pp.1151-1156
    • /
    • 2008
  • 본 논문에서는 복잡한 환경을 감시해야 하는 도시철도 서비스 구간 내 각종 사고를 예방하고, 사고 및 재난 발생 시 신속한 상황파악 및 대처를 통하여 피해를 최소화할 수 있는 능동적인 감시체계로 변환하기 위한 지능화된 종합감시 시스템을 개발하는데 있어, 요구되는 지능형 감시 카메라의 성능 및 관련기술을 분석하였다.

  • PDF

LIGA 공정에서의 노광시간과 X선마스크 흡광체의 두께 (Exposure Time and X-Ray Absorber thickness in the LIGA Process)

  • 길계환;이승섭;염영일
    • 한국진공학회지
    • /
    • 제8권2호
    • /
    • pp.102-110
    • /
    • 1999
  • The LIGA X-ray exposure step was modelled into three inequalities, by assuming that the X-ray energy attenuated within a resist is deposited only in the localized range of the resist. From these inequalities, equations for the minimum and maximum exposure times required for a good quality microstructure were obtained. Also, an equation for the thickness of an X-ray mask absorber was obtained from the exposure requirement of threshold dose deposition. The calculation method of the synchrotron radiation power from a synchrotron radiation source was introduced and applied to an X-ray exposure step. A power from a synchrotron radiation source was introduced and applied to an X-ray exposure step/ A power function of photon energy, approximating the attenuation length of the representative LIGA resist, PMMA, and the mean photon energy of the XZ-rays incident upon an X-ray mask absorber were applied to the above mentioned equations. Consequently, the tendencies of the minimum and maximum exposure and with respect to mean photon energy and thick ness of PMMA was obtained. Additionally, the tendencies of the necessary thickness of PMMA and photon energy of the X-ray mask absorber with respect to thickness of PMMA and photon energy of the X-rays incident upon an X-ray mask absorber were examined. The minimum exposure time increases monotonically with increasing mean photon energy for the same total power density and is not a function of the thickness of resist. The minimum exposure time increases with increasing mean photon energy for the same total power density in the case of the general LIGA process, where the thickness of PMMA is thinner than the attenuation length of PMMA. Additionally, the minimum exposure time increases monotonically with increasing thickness of PMMA. The maximally exposable thickness of resist is proportional to the attenuation length of the resist at the mean photon energy with its proportional constant of ln $(Dd_m/D_{dv})$. The necessary thickness of a gold X-ray mask absorber due to absorption edges of gold, increases smoothly with increasing PMMA thickness ratio, and is independent of the total power density itself. The simplicity of the derived equations has made clearly understandable the X-ray exposure phenomenon and the correlation among the exposure times, the attenuation coefficient and the thickness of an X-ray mask absorber, the attenuation coefficient and the thickness of the resist, and the synchrotron radiation power density.

  • PDF

강합성 2거더교 프리스트레스트 바닥판의 설계 최소두께 (Minimum Design Thickness of Prestressed Concrete Deck Slabs for Composite Two-Girder Bridges)

  • 황훈희;조창빈;곽종원;이용우
    • 대한토목학회논문집
    • /
    • 제26권1A호
    • /
    • pp.183-190
    • /
    • 2006
  • 2거더교를 위한 장지간 바닥판의 설계에서 바닥판의 안전성과 사용성을 만족시키면서 두께를 줄여 자중을 최소화하는 것은 중요한 요소 중의 하나이다. 이 논문에서는 2거더교를 위한 횡방향 프리스트레스트 콘크리트 바닥판의 설계 최소두께와 배근상세를 안정성, 사용성을 고려하여 제시하였다. 대상 교량은, 실용적인 2거더교를 대표할 수 있는 교량으로, 교량길이 40 m의 단순교이다. 대상교량의 바닥판의 지간을 4 m~12m로 변화시켜 가며 분석하였다. 바닥판의 이방성 거동을 고려하여 최소단면을 일방향 슬래브로 설계하고, 균열폭과 피로강도를 평가하였으며, 처짐제한을 충족시킬 수 있는 최소 수준의 두께와 비교하였다. 연구결과, 피로내구성의 확보를 위해서는 직경 16 mm이하의 철근을 사용하는 것이 좋으며, 지간이 8 m를 넘는 장지간 바닥판은 처짐에 대한 사용성이 두께 결정의 지배적 요소임을 확인하였다. 또한, 현행 도로교 설계기준의 배력 철근량 규정을 적용하면 지간 4 m 이상의 바닥판에서는 지간 3 m 이하의 바닥판에서 기대되는 정도의 교축방향의 구조적 연속성을 확보할 수 없는 것으로 나타났다.

소나무와 낙엽송 스킨팀버의 ACQ, CUAZ, CuHDO 가압처리를 위한 처리용 목재의 적정 함수율 및 처리목재의 정착 특성 평가 (Evaluation of Pretreatment Moisture Content and Fixation Characteristics of Treated Wood for Pressure Treatment of Japanese Red Pine and Japanese Larch Skin Timber with ACQ, CUAZ and CuHDO)

  • 최용석;오세민;김규혁
    • Journal of the Korean Wood Science and Technology
    • /
    • 제39권6호
    • /
    • pp.481-489
    • /
    • 2011
  • 본 연구에서는 소나무와 낙엽송 스킨팀버의 ACQ-2, CUAZ-2, CuHDO-1 가압처리 특성을 평가하기 위해 소나무 변재부와 낙엽송 심재부 시험편을 대상으로 처리용 목재의 함수율이 방부제 처리도에 미치는 영향과 방부제 유효성분인 구리의 처리목재 내 정착 특성을 조사하였다. 본 연구 결과에 의하면 소나무 변재부는 방부제 종류에 관계없이 함수율 30%부터 사용환경 범주 H3용 처리목재의 침윤도와 흡수량 기준을 모두 만족하였다. 완벽한 방부제 침투가 가능한 소나무 변재부에서 깊이에 따른 방부제 흡수량 경사를 조사한 결과, 방부제 종류에 따른 차이가 관찰되었다. CuHDO-1 처리 시험편에서 발생한 경사가 ACQ-2와 CUAZ-2 처리 시험편에서의 경사보다 심했는데, 특히 고함수율(25, 30%) 시험편에서 경사가 저함수율(15, 20%) 시험편에서보다 심함을 알 수 있었다. 그러나 난주입성인 낙엽송 심재부는 처리용 목재의 함수율 조건 및 방부제 종류에 관계없이 처리도 가 매우 불량하였다. 낙엽송 심재부의 처리도 개선을 위해 증기 전처리($121^{\circ}C$의 포화수증기 조건에서 12시간 처리)를 실시한 결과, 낙엽송 심재부의 침윤도와 흡수량 모두 사용환경 범주 H3용 처리목재 기준에 부합하게 처리도가 개선됨을 확인할 수 있었다. 소나무 변재부와 낙엽송 심재부 시험편에서 공히 방부제 유효성분인 구리의 정착이 비건조 양생에 비하여 건조 양생에서 빨리 진행되었다. 소나무 변재부는 양생 초기 3~6일, 낙엽송 심재부는 양생 1일 이내에 3주간 정착된 구리 양의 95% 이상이 정착되었다. 양생 3주 후 처리목재 내에 미정착 상태로 남아있는 구리의 양은 ACQ-2, CuHDO-1, CUAZ-2 순으로 많았는데, 이는 처리용 작업액에 존재하는 구리의 양과 비례하였다.

코넥스(KONEX: Korea New Exchange) 시장 활성화 조치: 효과 및 시사점 (Regulation Changes to Boost KONEX: Effects and Implications)

  • 김명애;우민철
    • 벤처창업연구
    • /
    • 제12권3호
    • /
    • pp.191-202
    • /
    • 2017
  • 코넥스시장은 초기 중소, 벤처기업들이 거래소시장에 주식을 상장할 수 있게 함으로써 과다한 부채를 부담하지 않으면서 필요한 자금을 조달할 수 있게 하는 통로이다. 본 연구는 코넥스시장의 주요 제도들을 설명하고 이와 관련하여 그동안 꾸준히 시도해온 시장활성화 대책들의 효과를 분석하였다. 코넥스시장의 활성화를 위한 첫 번째 대책으로서 단일가매매를 접속매매로 변경한 조치의 경우에, 정보비대칭 개선 효과가 있는 것으로 나타났다. 두 번째, 투자위험 감당능력이 낮은 투자자의 시장진입을 제한하는 제도인 기본예탁금 요구수준을 기존의 3억 원에서 1억 원으로 낮춘 조치의 결과로 시장유동성이 현저히 향상되었고 시장참여자의 수가 증가했다. 마지막으로, 소액투자전용계좌 도입 조치는 개인투자자의 시장참여 정도를 높였으나 시장유동성 및 정보비대칭 개선으로 이어지지 않은 것으로 나타났다. 분석결과를 종합할 때, 투자자범위제한 축소 조치를 통해 다양한 투자자의 활발한 시장 참여를 유도하는 것이 조속한 시장활성화에 가장 효과적인 한편, 소액투자자 증가에 대비하여 상장주식에 대한 정보생성 통로를 강화함으로써 정보비대칭을 완화하는 것이 장기적으로 창업기업의 직접금융시장에서의 조달비중 확대를 꾀할 수 있는 방안임을 시사한다.

  • PDF

대구시내(大邱市內) 국민학교(國民學校) 놀이터의 안전성(安全性) 조사(調査) (Assessment of Safety of Playground Equipment in Elementary Schools in Taegu)

  • 박정한;윤순길
    • Journal of Preventive Medicine and Public Health
    • /
    • 제24권3호
    • /
    • pp.414-427
    • /
    • 1991
  • 국민학교 놀이터 시설의 설치현황과 안전성을 조사하여 문제점을 파악하기 위하여 1991년 4윌 1일부터 4월 30일까지 대구시내 국민학교 총 119개교 중 117개교를 현장 조사하였다. 각 놀이시설의 안전성 판정기준은 Massachusetts 주의 Playground Safety Check List와 우리 나라 $6{\sim}12$세 아동의 발육표준치와 놀이기구 건축설계 자료집을 참고하여 만들었다. 설치된 놀이시설의 종류는 그네를 비롯해 11종이었으나 그 수는 철봉을 제외한 모든 시설이 국민학교 체육장 설비기준의 $50{\sim}60%$ 정도만 설치되어 있었다. 기존의 시설 가운데 그네는 47.3%, 평행봉은 16.6%, 지구공은 20.0%, 미끄럼틀은 16.0%가 사용불가능한 상태였다. 그네, 미끄럼틀, 시이소, 지구공, 씨름장은 안전성이 양호한 상태가 하나도 없고, 철봉은 59.0%, 평행봉은 31.4%, 그리고 그루터기는 13.5%가 양호한 상태였다. 미끄럼틀 26.4%, 지구공 20.0%, 시이소 11.6%, 평행봉 10.4%, 씨름장 9.8%, 그네와 그루터기는 각각 7.4%, 철봉은 3.9%가 위험한 상태로 안전성에 문제가 있었다. 나머지는 사용불가 또는 보완을 요하는 상태였다. 이처럼 대구시내 국민학교에서는 놀이시설이 많이 부족하고, 기존의 시설도 안전성 기준이 없어 규격이 일정치 않으며, 사용 불가능한 것과 위험한 것도 많아 어린이 사고의 위험이 있었다. 따라서 놀이시설의 확충과 안전성 기준의 설정이 요망되며 기존시설의 보완작업이 시급한 일이다.

  • PDF

코넥스(KONEX)시장의 재도약을 위한 제도개선 연구 (A Study on Improvement of the KONEX, the Emerging Exchange for SMEs and Startups)

  • 김윤경;신현한;조병문
    • 벤처창업연구
    • /
    • 제17권1호
    • /
    • pp.177-189
    • /
    • 2022
  • 본 연구는 중소 및 초기벤처기업이 간접금융과 정책금융에 의존하는 대신 자본시장을 통해 직접 자금을 조달하게 하는 코넥스시장의 재도약 방안을 제시한다. 코넥스시장에서 인적, 물적 상장인프라가 제한된 기업들은 성장하고 벤처투자자와 같은 모험자본은 투자의 조기 회수를 기대할 수 있다. 그러나 2013년 개설 당시부터 제기되어 온 유동성 부족과 거래량 부진은 수급의 문제에 그치는 것이 아니라 가격발견기능까지도 저해해왔다. 또한 코스닥시장의 적극적인 상장요건 완화와 장외시장인 K-OTC시장의 투자수요 흡수로 신규 상장기업이 급감하며 제도 개선이 더욱 요구되고 있다. 본 연구는 비상장기업이 코넥스시장에 상장하고, 이후 코스닥시장에 이전하기까지 작용하는 규제 또는 제도의 개선을 다섯 가지로 제시하였다. 먼저, 투기적 수요에 대한 우려가 적으므로 개인투자자에 대한 기본예탁금 규제를 폐지하여 투자자를 확대해야 한다. 둘째, 지정자문인이 신규 상장사를 발굴하고 지원하는 역할에 충실하도록 지정자문인이 공시를 대리하지 않고 기업이 직접공시하도록 전환하여야 한다. 셋째, 거래량을 증가시키기 위해 상장유지요건으로 도입된 지분분산 5% 의무화를 25%로 확대하되 인센티브 부여 방식으로 운영해야 할 것이다. 넷째, 코스닥시장이 상장요건으로 이익실현요건을 완화해가고 있으므로 신속이전상장에 과도하게 부과된 이익실현요건을 현실화해야 한다. 마지막으로는 성실공시와 지분분산을 충족하고 투자자보호 장치를 마련한 코넥스기업들이 코스닥으로 자동이전상장한다면 시장참여자의 불확실성을 감소시키고 코넥스시장의 인큐베이팅 역할을 강화할 수 있을 것이다.