• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1229-1232
• /
• 2008

We have successfully manufactured high-quality top-contact organic thin-film transistors using inkjet technologies with sub-femtoliter droplet volume. Silver fine lines were directly patterned by inkjet on pentacene channel layers. The minimum width of silver lines was $1{\mu}m$ with without the need for pre-patterning or surface pretreatments. The mobility was $0.3\;cm^2/Vs$.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.372-376
• /
• 2009

In this paper, new and simple optical transmission link with fixed dispersion management (DM) scheme, i.e., pre(post) compensation and residual dispersion per span (RDPS) are fixed to net residual dispersion (NRD) = 0 ps/nm, and optical phase conjugator (OPC) having optimal position depending on launch power in WDM transmission system is proposed. Also, effective launch power range of WDM channels resulting 1 dB eye opening penalty (EOP) is induced as a function of OPC position. First, it is confirmed that, for applying DM into WDM transmission link fixed pre(post)compensation and RDPS, which are independence on exact system parameters except launch power, sufficiently are used in WDM links, but OPC with optimal position is needed for effective compensating impairments of WDM channels. And, it is confirmed that effective launch power is broader in case of RDPS = 100 ps/nm than in RDPS = 50 ps/nm. But, it is shown that the best OPC position offset is -0.6 km from a point of view of power window, which is defined as difference between maximum and minimum effective launch power.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.22-24
• /
• 2006

Of all the proposed resonant techniques, the well-known phase-shifted full bridge converter remains one of the most attractive because it offers an easy way of achieving ZVS with a minimum of extra components added, which is essential for the high power applications. This paper describes the design of a digital controller for a Phase Shifted Full-bridge PWM Converter. The small-signal model is derived incorporating the effects of phase-shift control and the utilization of the transformer leakage inductance and power FET junction capacitances to achieve the zero-voltage resonant switching. Based on the derived small-signal model, the digital controller is designed in the discrete domain. The performance of designed controller is verified through the simulation.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권4호
• /
• pp.331-336
• /
• 2005

With increasing emphasis on non-conventional energy systems and autonomous power generation, development of improved and appropriate generating systems has recently taken on greater significance. This paper describes the performance analysis of a single phase self-excited induction generator (SEIG), suitable for autonomous/standby power systems. The system is also appropriate for wind energy systems and small portable systems. Both windings of the induction machine, the main and the auxiliary, are utilized. One winding will be devoted to the supply excitation current only, by being connected to the excitation capacitor, while the load is connected across the other winding. As the design of excitation, the minimum of self-excited capacitor connected auxiliary winding is determined as the suitable value using a circuit equation of auxiliary winding. For the steady state analysis, the equivalent circuit of the single-phase induction generators is used as a basis for modeling using the double-revolving field theory. The validity of the designed generator system is confirmed by experimental and computed results.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.593-603
• /
• 2009

This paper proposes and describes the design and operational principles of a three-phase three-level nine switch voltage source inverter. The proposed topology consists of three bi-directional switches inserted between the source and the full-bridge power switches of the classical three-phase inverter. As a result, a three-level output voltage waveform and a significant suppression of load harmonics contents are obtained at the inverter output. The harmonics content of the proposed multilevel inverter can be reduced by half compared with two-level inverters. A Fourier analysis of the output waveform is performed and the design is optimized to obtain the minimum total harmonic distortion. The full-bridge power switches of the classical three-phase inverter operate at the line frequency of 50Hz, while the auxiliary circuit switches operate at twice the line frequency. To validate the proposed topology, both simulation and analysis have been performed. In addition, a prototype has been designed, implemented and tested. Selected simulation and experimental results have been provided.

• 말소리와 음성과학
• /
• 제3권1호
• /
• pp.87-94
• /
• 2011

The decision directed (DD) approach is widely used to determine a priori SNR from noisy speech signals. In conventional speech enhancement systems with a DD approach, a priori SNR is estimated by using only the magnitude components and consequently follows a posteriori SNR with one frame delay. We propose a phase-dependent two-step a priori SNR estimator based on the minimum mean square error (MMSE) in the log-mel spectral domain so that we can consider both magnitude and phase information, and it can overcome the performance degradation caused by one frame delay. From the experimental results, the proposed estimator is shown to improve the output SNR of enhanced speech signals by 2.3 dB compared to the conventional DD approach-based system.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.1-5
• /
• 2008

Silicide formation process and the formation sequence were investigated in this study. It was postulated that the formation of the second silicide phase involves glass formation between the first silicide phase and Si given that a thin metal film is deposited on a Si substrate. The concentration of glass was assumed to be located where the free energy of the liquid alloy with respect to the first nucleated compound and solid Si (${\Delta}$G') is most negative. It was also mentioned that the glass concentration is close to the composition of the second phase in order to achieve the maximum energy degradation. It was shown that the minimum ${\Delta}$G' concentration can be estimated by interpolating the portion of the liquidus where the liquid alloy is in equilibrium with the two solid constituents, namely the first compound phase and Si, thereby forming a hypothetical eutectic.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.376-385
• /
• 2007

Construction project is necessary element for human life to upgrade the quality and convenience. However, due to its contradictory nature to the environment preservation, environmental pollution and damage, deterioration of natural scenery, noise/vibration, water quality pollution, etc. caused in the process of construction greatly affect the environment. For the building or construction project, its possible impact on environment during construction work and after completion must be predicted at its design phase, which will result in the completion of the architecture convenient for human being with its environmental pollution reduced to minimum level. In this study, the checklist of environmental factors was suggested, which should be taken into account at its design phase in conducting the construction work. Proposed checklist was linked with the developed web-based system for the convenience of users like designer and construction manager, etc. It is expected that the checklist suggested by this study will help the designer and construction manager to continue the steady development from the environmental viewpoint during the design phase.

• 공업화학
• /
• 제2권3호
• /
• pp.209-215
• /
• 1991

n-헥산과 40 wt % p-TSA 수용액으로 이루어진 비혼화성 액상계에서 교반에 의한 유기상의 분산을 해석하였다. 사용된 교반기는 blade의 형태가 flat와 금망으로 된 4가지 형태의 6-bladed turbine 교반기를 사용하였다. 실험결과, 동일한 교반속도에서 유기상의 분산정도는 blade의 형태가 flat, 60 mesh, 40 mesh, 20 mesh의 순서로 감소하였고 계면활성제인 TBA의 농도가 증가할수록, 그리고 유기상의 부피비가 작을수록 유기상은 잘 분산되었다. 또한 완전분산에 필요한 최소교반속도는 flat, 60 mesh, 40 mesh, 20 mesh의 순서로 증가하였으나 최소소요동력은 거의 동일하였다. 이때 Power number와 Reynolds number와의 관계는 $N_p=a\;N_{Re}{^b}$ 이었으며 교반기의 형태에 따른 상수 a와 혼합계의 종류에 따른 상수 b의 값은 각각 2200~4100, -0.69~-0.63 범위이었다.

• 전자공학회논문지C
• /
• 제36C권2호
• /
• pp.62-67
• /
• 1999

변조된 Passband 신호의 동기 검파 방식의 복조(Coherent Demodulation)에서 대부분의 수신 신호 decision에서 나타나는 실제적인 문제는 그 성상도가 회전하는 경우이다. 일단 성상도가 회전하는 경우이다. 일단 성상도가 회전하게 되면 수신단에서는 유효한 성상도와 구별해 낼 수 있는 방법이 없다. 그러나 수신기는 회전된 성상도에 의해 수신된 위상을 결정하므로 이러한 문제를 극복해 낼 수 없다면 그 결과는 계속되는 에러로 나타나게 된다. 본 논문에서는 먼저 QPSK 복조기에서의 주파수 옵셋과 위상 오차를 극복하기 위한 Carrier Recovery Loop에 대해서 살펴보고 나서 위상 Rotation을 방지하기 위한 방법을 제시하였다. 검출된 위상 오차를 주파수 옵셋 교정에 선별적으로 적용함으로써 Phase rotation의 발생을 줄일 수 있다. 시뮬레이션을 통해 제시한 방법의 타당성을 검증하였다.