• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.40-42
• /
• 2006

무선 센서 네트워크는 제한된 배터리를 갖는 노드로 토폴로지를 구성한다. 이러한 이유 때문에 전체 네트워크의 수명을 극대화하고 라우팅에 에너지 효율성을 고려하여 토폴로지를 구성하는 것이 중요하다. 네트워크 토폴로지는 전송범위에 의해 결정되며 노드의 고정된 전송범위로 인한 에너지 비효율성 문제를 해결하는 방법으로 최적의 전송범위 혹은 MST(Minimum Spanning Tree)기반으로 토폴로지를 구성하는 대안이 있지만 최적의 솔루션은 아니다. 본 논문에서는 단계에 따라 전송범위를 차별화시켜 라우팅을 수행하는 DR(Differential Routing)을 제안하였다. DR은 전송범위에 기반하여 최적의 토폴로지를 구성한다. 그리고 무선 센서 네트워크의 특정한 통신 패턴에 맞게 트리 구성 단계와 데이터 수집 단계의 전송범위를 차별화시켜 전송파워를 조절함으로써 전체 네트워크의 수명 극대화, 파티션 방지, 그리고 에너지 효율성을 향상시킨 알고리즘이다. 실험을 통해 제안한 DR이 최적의 토폴로지를 구성하여 에너지 효율성 측면에서 좋은 성능을 보임을 확인할 수 있었다.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.121-129
• /
• 2011

One of the major challenges of minimum energy consumption for wireless sensor networks(WSN) environment. LEACH protocol is hierarchical routing protocol that obtains energy efficiency by using clustering. However, LEACH protocol in each round, because the new cluster configuration, cluster configuration, whenever the energy consumed shorten the life of the network. Therefore in this paper, the cluster is formed in WSN environment in early stage and the problems with energy waste have been solved by selecting C-node. In the initial round of proposed model uses 26 percent more than traditional LEACH energy consumption. However, as the round is ongoing, it has been proved by the network simulation tool that the waste of energy could be diminished up to 35%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1188-1197
• /
• 2010

A most important thing in a connected dominating set(CDS)-based routing in a wireless ad-hoc network is to select a minimum number of dominating nodes and then build a backbone network which is made of them. Node failure in a CDS is an event of non-negligible probability. For applications where fault tolerance is critical, a traditional dominating-set based routing may not be a desirable form of clustering. It is necessary to minimize the frequency of reconstruction of a CDS to reduce message overhead due to message flooding. The idea is that by finding alternative nodes within a restricted range and locally reconstructing a CDS to include them, instead of totally reconstructing a new CDS. With the proposed algorithm, the resulting number of dominating nodes after partial reconstruction of CDS is not changed and also its execution time is faster than well-known algorithm of construction of CDS by 20~40%. In the case of high mobility situation, the proposed algorithm gives better results for the performance metrics, packet receive ratio and energy consumption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.1119-1143
• /
• 2014

Lightweight trust mechanism with lightweight cryptographic primitives has emerged as an important mechanism in resource constraint wireless sensor based mobile devices. In this work, outlier detection in lightweight Mobile Ad-hoc NETworks (MANETs) is extended to create the space of reliable trust cycle with anomaly detection mechanism and minimum energy losses [1]. Further, system is tested against outliers through detection ratios and anomaly scores before incorporating virtual programmable nodes to increase the efficiency. Security in proposed system is verified through ProVerif automated toolkit and mathematical analysis shows that it is strong against bad mouthing and on-off attacks. Performance of proposed technique is analyzed over different MANET routing protocols with variations in number of nodes and it is observed that system provide good amount of throughput with maximum of 20% increase in delay on increase of maximum of 100 nodes. System is reflecting good amount of scalability, optimization of resources and security. Lightweight modeling and policy analysis with lightweight cryptographic primitives shows that the intruders can be detection in few milliseconds without any conflicts in access rights.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.9
• /
• pp.3034-3055
• /
• 2014

Wireless Sensor Networks have extensively been utilized for ambient data collection from simple linear structures to dense tiered deployments. Issues related to optimal resource allocation still persist for simplistic deployments including linear and hierarchical networks. In this work, we investigate the case of dimensioning parameters for linear and tiered wireless sensor network deployments with notion of providing extended lifetime and reliable data delivery over extensive infrastructures. We provide a single consolidated reference for selection of intrinsic sensor network parameters like number of required nodes for deployment over specified area, network operational lifetime, data aggregation requirements, energy dissipation concerns and communication channel related signal reliability. The dimensioning parameters have been analyzed in a pipeline monitoring scenario using ZigBee communication platform and subsequently referred with analytical models to ensure the dimensioning process is reflected in real world deployment with minimum resource consumption and best network connectivity. Concerns over data aggregation and routing delay minimization have been discussed with possible solutions. Finally, we propose a node placement strategy based on a dynamic programming model for achieving reliable received signals and consistent application in structural health monitoring with multi hop and long distance connectivity.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.461-472
• /
• 2007

In Ubiquitous Sensor Network (USN), the sensor nodes are required to consume their energy evenly to prolong the lifetime of the entire sensor network because of the limited energy of the sensor node. AODV which is applied to USN as routing protocol selects route according to only the shortest distance of the minimum hop count but regardless of the remaining battery power for each node. Thus it comes to ill-balanced power consumption seriously. In this paper, a scheme that controls packet relay quantity of each sensor node adaptively to prevent traffic overhead at a certain node and to increase the entire network lifetime is proposed. As it is analyzed by simulations, the proposed scheme enhances USN lifetime by balancing each sensor node's packet relay quantity.

• Journal of Korea Water Resources Association
• /
• v.46 no.11
• /
• pp.1053-1067
• /
• 2013

Distributed ecohydrological model which can simulate hydrological components, vegetation and landsurface temperature using practically available input and observed data with minimum parameters is introduced. This model is designed to properly simulate in area with lack of observed data. Parameter estimation and calibration of the model can be carried out with indirectly estimated data (monthly surface runoff by NRCS-CN method and annual actual vaporization by empirical equation) and remote sensing data (NDVI, LST) instead of observed data. We applied this model in the Naeseong creek basin to evaluate the model validity. Firstly, we found the sensitive parameters which largely influence the simulation results by sensitivity analysis, and then hydrological components, vegetation, land-surface temperature, routed streamflow and water temperature were simulated over 10 years (2001 to 2010) using calibrated parameters. Parameters are estimated by optimization method. It is shown that most of grids are well simulated. In the case of streamflow and water temperature, we checked two observed points in the outlet of watershed and it is shown that streamflow and water temperature are properly simulated as well. Hence, it can be shown that this model properly simulate the hydrological components, vegetation, land-surface temperature, routed streamflow and water temperature as well, even though in despite of using limited input data and minimum parameters.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2017

Communications for mobile sink groups such as rescue teams or platoons bring about a new challenging issue for handling mobility in wireless sensor networks. To do this, many studies have been proposed to support mobile sink groups. When closely looking at mobile sink groups, they can be divided into (multiple) small groups according to the property of applications. For example, a platoon can be divided into multiple squads to carry out its mission in the battle field. However, the previous studies cannot efficiently support the division of mobile sink groups because they do not address three challenging issues engendered by the mobile sink group division. The first issue is to select a leader sink for a new small mobile sink group. The efficient data delivery from a source to small mobile sink groups is the second issue. Last, the third issue is to share data between leader sinks of small mobile sink groups. Thus, this paper proposes a routing protocol to efficiently support the division of mobile sink groups by solving the three challenging issues. For the first issue, the proposed protocol selects a leader sink of a new small mobile sink group which provide a minimum summation of the distance between the new leader sink and the previous leader sink and the distance from the new leader sink to all of its member sinks. For the efficient data delivery from a source to small mobile sink groups in the second issue, the proposed protocol determines the path to minimize the data dissemination distance from source to small mobile sink group by calculating with the location information of both the source and the leader sinks. With regard to the third issue, the proposed protocol exploits member sinks located among leader sinks to provide efficient data sharing among leaders sinks by considering the location information of member sinks. Simulation results verified that the proposed protocol is superior to the previous protocol in terms of the energy consumption.