• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.373-379
• /
• 2016

The thermal control device for the periodic working component combined solid-liquid phase change material (PCM) with heat pipes is designed and numerically studied. Due to high latent heat and retaining constant temperature during melting process the component peak temperature, not withstanding small radiator size, is reduced. The warm-up heater power consumption to keep the minimum allowed temperature is also cut down since the accumulated thermal energy is released through the solidification. The thermal buffer mass (TBM) made of Al can give the similar effect but the mass and power consumption of warm-up heater should increase compared to PCM. The amount of PCM can be optimized depending on the component heat dissipation and on/off duty time.

• Journal of Embryo Transfer
• /
• v.12 no.3
• /
• pp.283-291
• /
• 1997

In vitro development of bovine embryos is affected by many factors such as energy substrates, amino acids, and some growth factors. It has been reported that mRNA of insulin, PDGF and their receptors are detected in cow embryos, and that some chelating agents such as EDTA and transferrin have beneficial role on mouse and bovine embryos. The author hypothesized that insulin, transferrin arid PDGF added to a culture medium increase in vitro development of bovine embryos by chelating toxic substance(s) or increasing cell growth and metabolism. Immature oocytes from slaughtered ovaries of Holstein cows and heifers were matured for 24 hours in a TCM199 containing 10% fetal calf serum, FSH, LH and estradiol with granulosa cells in vitro. Matured oocytes were coincubated with sperm for 30 hours in a modified Tyrode's medium (IVF). Embryos cleaved to 2- to 4-cell at 30 hours after IVF were selected and cultured in a 30-$\mu$l drop of a synthetic oviduct fluid medium (SOFM) containing 0.8% BSA, Minimum Essential Medium essential and non-essential amino acids, and insulin, transferrin or PDGF for 9 days. Supplementation of a SOFM with insulin, and /or transferrin did not increase develop-mental rate to expanding and hatching blastocyst of 2- to 4-cell bovine embryos compared with control. The highest developmental rate to hatching blastocyst was shown when PDGF was added at the concentration of 10 ng /ml among the supplementing doses tested in the present study (p<0.05). Addition of PDGF without insulin to a SOFM could not increase embrye development, but combined addition of PDGF with insulin significantly increased (p<0.05) embryo development to hatching blastocyst (50%) compared with control (38%). In conclusion, insulin and PDGF supplemented to a SOFM may act synergistically and have beneficial effect on in vitro development of 2- to 4-cell bovine embryos matured and fertilized in vitro.

• Nutrition Research and Practice
• /
• v.16 no.2
• /
• pp.233-247
• /
• 2022

BACKGROUND/OBJECTIVES: The objective of this study was to describe the development process of the Korean Healthy Eating Index (KHEI) based on the Korea National Health and Nutrition Examination Survey (KNHANES). SUBJECTS/METHODS: The components of KHEI were selected based on Dietary Guidelines for Koreans, domestic and overseas dietary quality indices, and results of the analysis of association with chronic diseases. The standards for scoring of KHEI were selected based on the 2015 Dietary Reference Intakes for Koreans (KDRI). The KHEI scores of Korean adults were calculated using a 1-day 24-h recall data in the 2013-2015 KNHANES. RESULTS: The KHEI included eight adequacy components evaluating the proper intake of recommended foods such as fruit, vegetable, and milk and three moderation components evaluating the consumption of food that limit intake such as sodium and saturated fatty acid. In addition, three balance components assessing the balance of energy intake were included. The KHEI score was defined to range from the minimum of 0 point to the maximum of 100 points. Among Korean adults, the total KHEI score was 63.2 out of 100. Gender and age differences were found in the average of total KHEI scores. Women showed higher score than men (61.7 in men and 64.7 in women, respectively). By age group, 20s and 30s showed the lowest scores with 57.4 and 61.1 respectively, and the scores increased with age by peaking at 67.8 in ages 60-69 and slowed down again in ages 70 or over. CONCLUSIONS: The KHEI can be useful for establishing and assessing national nutritional policies and in epidemiological studies to assess the relationship between overall dietary quality and chronic diseases. KHEI will need to be continuously updated to reflect changes in dietary guidelines and the KDRI.

• Journal of Bio-Environment Control
• /
• v.21 no.2
• /
• pp.79-87
• /
• 2012

This research was conducted to obtain basic data with regard to the heating performance that would be produced by installing an aluminum hot water pipe inside the greenhouse with the goal of reducing the heating energy in greenhouse. The research results are summarized as follows. The degree of difference in relation to the temperature by height within the greenhouse during the entire experiment was significant - within the range of 4.0~$7.0^{\circ}C$. The temperature difference between incoming and outgoing water was about $3.3^{\circ}C$ greater when FCU was activated compared to when it was not activated. Meanwhile, the amount of energy consumed increased about 36.2~40.1%. The amount of pyrexia per hour also increased by 44.6~52.0%. During the experiment period, circulated flux was within the range of 0.48~$0.49L{\cdot}s^{-1}$ while average fluid speed was 1.53~$1.56m{\cdot}s^{-1}$. The average temperature difference between incoming and outgoing water was 6.24~$11.50^{\circ}C$. The amount of heating value by each set temperature within the minimum outdoor temperature range of -14.0~$-0.6^{\circ}C$ was 135,930~307,150 kcal, and the range was within the 9,610~$19,630kcal{\cdot}h^{-1}$ per hour. This demonstrated that about 23~53% heating energy of the maximum heating load could be supplied. Total radiating value and amount of energy consumed were 2,548,306 kcal and 3,075.7 kWh, respectively. When heating takes place using oil, which is a fossil fuel, the total amount of light oil consumed was 281.6 L while the cost was 321,000 won. When the electricity cost for farms is applied, the total cost was about 110,730 won, which is about 33.5% of the cost required compared to oil consumption. The temperature at in the experiment area was about 8.3~$14.6^{\circ}C$ higher compared to that of the control area.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.65-73
• /
• 1998

One approach to improved image restoration methods has been the incorporation of additional source information via Gibbs priors that assume a source that is piecewise smooth. A natural Gibbs prior for expressing such constraints is an energy function defined on binary valued line processes as well as source intensities. However, the estimation of both continuous variables and binary variables is known to be a difficult problem. In this work, we consider the application of the deterministic annealing method. Unlike other methods, the deterministic annealing method offers a principled and efficient means of handling the problems associated with mixed continuous and binary variable objectives. The application of the deterministic annealing method results in a sequence of objective functions (defined only on the continuous variables) whose sequence of solutions approaches that of the original mixed variable objective function. The sequence is indexed by a control parameter (the temperature). The energy functions at high temperatures are smooth approximations of the energy functions at lower temperatures. Consequently, it is easier to minimize the energy functions at high temperatures and then track the minimum through the variation of the temperature. This is the essence of a continuation method. We show experimental results, which demonstrate the efficacy of the continuation method applied to a Bayesian restoration model.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.179-190
• /
• 2012

This study was performed to obtain a heat saving effect and enhance the efficiency of a greenhouse by using a hot water piping in order to minimize the operating costs of a greenhouse as oil prices continue to rise. This method also reduces the likelihood of accidents caused by snowdrifts in regions with heavy snowfall. In general, the experimental plot was $2.0{\sim}6.0^{\circ}C$ higher than the control plot. When the skylight felt was opened, the minimum temperature was in the range of $3.0{\sim}12.0^{\circ}C$. Therefore, we judged that damage caused by snowdrifts may be prevented partly by active heating. The temperature difference inside of the greenhouse by height was insignificant. The maximum heating load of the greenhouse according to crop was respectively about $37,000kcal{\cdot}h^{-1}$ and $41,700kcal{\cdot}h^{-1}$. During the experiment, the heat value of each designed temperature in the range of the minimum ambient temperature $-11.9{\sim}4.0^{\circ}C$ was about 95,000~322,000 kcal and it was in the range of $6,050{\sim}20,900kcal{\cdot}h^{-1}$. If it is compared with the maximum heating load, it can be shown that about 15~56% of the heating energy can be supplied. The total heat value and the amount of power consumption were 2,629,025 kcal and 677.3 kWh respectively during the experiment. If it is heated with diesel, a fossil fuel, the consumption during the experiment was 291 L and the cost was 331,700won. Total cost of using electric power was about 24,400 won and it is shown that it is about 7.5% of the cost of diesel consumption. Also, if the total amount of power consumption is converted into energy, it is approximately 582,200 kcal and the energy was just about 22% of the total heat value.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.83-88
• /
• 2016

In this study, previously reported surplus solar energy-related study result and current status of fan coil unit (FCU) for cooling and heating installed in the current sites were briefly examined and then a method to determine the number of FCUs required to recover surplus solar energy was schematically proposed to provide basic data for researchers and technical engineers in this field. The maximum, mean, and minimum outside temperatures during the experiment period were about $28.2^{\circ}C$, $4.4^{\circ}C$, and $-11.5^{\circ}C$, respectively. The horizontal surface solar radiation level outside the greenhouse was in a range of $0.8-20.5MJ{\cdot}m^{-2}$ and mean and total solar radiation were $10.8MJ{\cdot}m^{-2}$ and $1,187.5MJ{\cdot}m^{-2}$. The mean temperature and relative humidity in the greenhouse during the daytime were in a range of 18.8-45.5 and 53.5-77.5%. The total surplus solar energy recovered from the greenhouse during the experiment period was approximately 6,613.4MJ, which could supplement about 6.7% of the total heating energy 98,600.2 MJ. In addition, the number of FCUs installed for heating varies case to case, although similar FCUs are used. Thus, it is necessary to study the installation height, orientation and installation distance as well as the appropriate number of FCUs from the efficient and economical viewpoints. The required numbers of FCUs for surplus solar energy recovery were 8.4-10.9units and 6.1-8.0units based on air mass and circular flow rate that passed through the FCUs. Considering calculation methods and the risks such as efficiency and use environments of FCUs, it was found that about nine units (one unit per $24m^3$ approximately) needed to be installed. The required number of FCUs for surplus solar energy recovery was around one unit per $24m^3$ approximately.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.159-167
• /
• 2014

In Korea, July 2012, the law as called 'Act on Safety Control of Radioactive Rays Around Living Environment' was implemented to control the consumer product containing Naturally Occurring Radioactive Material (NORM), but, there are no appropriate database and effective dose calculation system. The aim of this study was to develop evaluation technique of the exposure dose with the use of the consumer products containing NORM and to understand the characteristics of the exposed dose according to the radiation type and energy. For the evaluate of exposure dose, the ICRP reference phantom was simulated by the MCNPX code based on Monte Carlo method, and the minimum, medium, maximum energy of alphas, betas, gammas from the representative NORM of Uranium decay series were used as the source term in the simulation. The annual effective doses were calculated by the exposure scenario of the consumer product usage time and position. Short range of the alpha and beta rays are mostly delivered the dose to the skin. On the other hand, the gamma rays mostly delivered the similar dose to all of the organs. The results of the annual effective dose with $1Bq{\cdot}g^{-1}$ radioactive stone-bed and 10% radioactive concentration were employed with the usage time of 7 hours 50 minute per day, the maximum annual effective dose of alphas, betas, gammas were calculated 0.0222, 0.0836, $0.0101mSv{\cdot}y^{-1}$, respectively.

• Korean Journal of Plant Resources
• /
• v.25 no.2
• /
• pp.193-199
• /
• 2012

This study was carried out to evaluate the agronomic characteristics and biological activities of $Sorghum$ $bicolor$ germplasms introduced from USA. Plant height, stem diameter, tiller number, leaf length, leaf width, leaf vein color, ear type, ear length and ear width have different from the cultivated accessions. Sweet-N-Sterile (#4) showed the tallest height, widest ear-width and stem diameter. Most of $Sorghum$ $bicolor$ plants may be available to use for bio-energy from these results showing big biomass. Antioxidant activities of 11 cultivars collected from USA were examined by DPPH assay and reducing power. Among the cultivars, Premium stock (#1), Early Sumac (#7), SS Silage (#9) and WGF Grain Sorghum (#11) showed a significantly higher antioxidant activity in comparison to others. Early Sumac (#7) and SS silage (#9) showed more strong reducing power activities than ${\alpha}$-tocopherol, a positive control. Premium stock (#1), Sweet-N-Sterile (#4), Early Sumac (#7) and SS Silage (#9) were also showed high antioxidant activities by DPPH assay and reducing power experiment. BMR Gold I (#3) displayed strong antimicrobial activity against $Escherichia$ $coli$ at minimum inhibitory concentrations (125 ${\mu}g$/ml).

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.185-196
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(Quality of Service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to let only the minimum number of servers needed to handle current user requests ON. Previous studies on energy aware server cluster put efforts to reduce power consumption further or to keep QoS, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management based on autonomous learning for energy aware server clusters. Using parameters optimized through autonomous learning, our method adjusts server power mode to achieve maximum performance with respect to power consumption. Our method repeats the following procedure for adjusting the power modes of servers. Firstly, according to the current load and traffic pattern, it classifies current workload pattern type in a predetermined way. Secondly, it searches learning table to check whether learning has been performed for the classified workload pattern type in the past. If yes, it uses the already-stored parameters. Otherwise, it performs learning for the classified workload pattern type to find the best parameters in terms of energy efficiency and stores the optimized parameters. Thirdly, it adjusts server power mode with the parameters. We implemented the proposed method and performed experiments with a cluster of 16 servers using three different kinds of load patterns. Experimental results show that the proposed method is better than the existing methods in terms of energy efficiency: the numbers of good response per unit power consumed in the proposed method are 99.8%, 107.5% and 141.8% of those in the existing static method, 102.0%, 107.0% and 106.8% of those in the existing prediction method for banking load pattern, real load pattern, and virtual load pattern, respectively.