• Journal of The Korean Astronomical Society
• /
• v.55 no.1
• /
• pp.1-9
• /
• 2022

We present the photometric properties of V608 Cas from detailed studies of light curves and eclipse timings. The light curve synthesis indicates that the eclipsing pair is an overcontact binary with parameters of ∆T = 155 K, q = 0.328, and f = 26%. We detected the third light ℓ₃, which corresponds to about 8% and 5% of the total systemic light in V and R bands, respectively. Including our 6 timing measurements, a total of 38 times of minimum light were used for a period study. It was found that the orbital period of V608 Cas has varied in some combination of an upward parabola and two periodic variations. The continuous period increase with a rate of +3.99 × 10^-7 d yr^-1 can be interpreted as a mass transfer from the secondary component to the primary star at a rate of 1.51 × 10^-7 M_⊙ yr^-1. The periods and semi-amplitudes of the two periodic variations are about P₃ = 16.0 yr and P₄ = 26.3 yr, and K₃ = 0.0341 d and K₄ = 0.0305 d, respectively. The most likely explanation of both cycles is a pair of light-traveling time effects operated by the possible presence of third and fourth components with estimated masses of M₃ = 2.20 M_⊙ and M₄ = 1.27 M_⊙ in eccentric orbits of e₃ = 0.66 and e₄ = 0.52. Because the contribution of ℓ₃ is very low compared to the estimated masses of two circumbinary objects, they can be inferred as very faint compact objects.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.1
• /
• pp.45-52
• /
• 2020

Even though sewers have been conventionally designed to prevent from sediment deposition using a specified minimum velocity or shear stress at a particular depth of flow or with a particular frequency of occurrence, it was appreciated that these methods do not consider the characteristics and concentration of the sediment and the specific hydraulic conditions of the sewer with sediment. In this study, a densimetric Froude number formula was suggested considering particle diameter and volumetric concentration of the sediment as well as flow depth and flowrate, based on several domestic field inspections, which was compared with other formulas proposed by previous investigators. When the sediment concentration was not considered, the calibration coefficient of 0.125-1.5 to the densimetric Froude numbers of this study was needed to obtain the similar ones with previous investigators'. For the densimetric Froude number formula obtained with consideration of sediment concentration, the exponent value of term C_v was almost the same as that of previous results and that of d₅₀/R_h was similar for F_r < 2.2.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.275-282
• /
• 2004

We completed the light curves of the contact binary CK Boo for 13 nights from June to July in 2004 using the 1-m reflector and BVR filters at Mt. Lemmon Optical Astronomy Observatory, and determined four new times of minimum light (three timings for primary eclipse, one for secondary). With contact mode of the 1998-version Wilson-Devinney binary model, we analyzed our BVR light curves and Rucinski & Lu (1999)'s radial-velocity ones. As a result, we found CK boo to be A-type over-contact binary ($f=84\%$) with the low mass ratio (q=0.11) and orbital inclination ($i=65^{\circ}$). Absolute dimensions of the system are determined from our new solution; $M_1=1.42Me{\odot},\;M_2=0.15M{\odot},\;R_1=1.47R{\odot},\;R_2=0.59M{\odot}$ and the distance to it is derived as about 129pc. Our distance is well consistent with that ($157{\pm}33pc$) from the Hipparcos trigonometric parallax within the limit of the error yielded by the latter.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.185-194
• /
• 2022

Coffee is one of the most consumed beverages in the world and is the second largest traded commodity after petroleum. Due to the great demand of this product, large amounts of waste is generated in the coffee industry, which are toxic and represent serious environmental problems. This study aims to study the possibility of recycling spent coffee grounds (SCG) as a mineral admixture by replacing the cement in the manufacturing of concrete. To recycle the coffee g rounds, the SCG was dried to remove moisture and fired in a kiln at 850 ℃ for 8 hours. Carbonized coffee grounds are produced as coffee grounds ash (CGA) through ball mill grinding. The chemical composition of the prepared coffee grounds ash was investigated using X-ray fluorescence (XFR). According to the chemical composition analysis, the major elements of coffee grounds ash are K₂O(51.74 %), CaO(15.92 %), P₂O₅(14.39 %), MgO(7.74 %) and SO₃(6.89 %), with small amounts of F₂O₃(0.66 %), SiO₂(0.59 %) and Al₂O₃(0.31 %) content. To evaluate quality and mechanical properties, substitutions of 5, 10, and 15 wt.% of coffee grounds ash (CGA) were tested. From the quality test results, the 28-day activity index of CGA5 reached 80 %, and the flow value ratio reached 96 %, which is comparable to the minimum requirement for second-grade FA. From the test results of the mortar, the optimal results have been found in specimens with 5 wt-% coffee grounds ash, showing good mechanical and physical properties.

• Applied Biological Chemistry
• /
• v.50 no.1
• /
• pp.18-22
• /
• 2007

The optimum production condition for the antibiotic from Bacillus thuringiensis BK4 was determined, and the suppression rate of Fusarium-wilt by the butanol-extracted antibiotic was verified by employing tomatoes in vitro and in vivo pot tests. Cell growth and antifungal activity were the best when 0.5% xylose and 0.2% peptone No.3 were given as carbon and nitrogen sources, respectively, in the presence of 5mM $CaCl_2$. The partially purified antibiotic successfully prevented Fusarium oxysporum pathogen in pot experiments. When the pots were treated with both live cells and the partially purified antibiotic, an additive-effect was seen in the suppression of Fusarium-wilt, but synergistic effect was not detected. The antibiotic, denoted BK4, purified by Sephadex LH-20 column chromatography was eluted with a single peak at a retention time of 38 min. on prep-HPLC; Minimum inhibition concentration of the homogenous antibiotic was determined to be 50${\mu}$g/ml.

• Microbiology and Biotechnology Letters
• /
• v.38 no.3
• /
• pp.278-282
• /
• 2010

In this study, the antibacterial activity and component analysis of Persicaria perfoliata extracts were investigated. MIC (Minimum Inhibitory Concentration) values of ethyl acetate fraction from P. perfoliata on Escherichia coli, Propionibacterium acnes, and Staphylococcus aureus were 0.25%, equally. The results showed that the antibacterial activity of the ethyl acetate fraction was the highest in the S. aureus and P. acnes. Ethyl acetate fraction from P. perfoliata extracts showed 5 bands in TLC and 8 peaks in HPLC (320nm). In HPLC chromatogram of ethyl acetate fraction, first main peak 2 (24.99%) and peak 3 (22.65%) were identified as quercetin-3-o-glucuronide and isoquercitrin in the order of elution time. Also, in HPLC chromatogram of deglycosylated fraction, main peak 2 (76.93%) was identified as quercetin in the order of elution time. And these components are very effective as antioxidants. Thus, these results indicate that extract/fractions of P. perfoliata can be applicable to new functional cosmetics for antioxidant, antibacterial activity.

• Resources Recycling
• /
• v.6 no.3
• /
• pp.3-8
• /
• 1997

The EA.F. sleelmaking slag (slag that follow) of a cnmvany 1 Co.. containzd a simple substance of a metal, wustlte (FeO), magnetite (Fe,O,), gehlenite (CaAl,SiO,), monlicellite (CaMgSiO,), dc. To recovere a metal (Fe grade . t95%) in the slag, it is desirable that the particles of a metal are isolated from thc slag and madc for a liberated subslance. Then, the liberaled melal is easlly recoveled by a magnetic separation. If thc rcclarnalcd slag, the sizc of which ranges under 40 nun, have a mulli-stage crushing, the most of a metal in thc slag is simply isolaled as a liberated subslance. If the mad, lhat is a liberated subslance and a sphere, is recovered by a magnetic field intensity. the minimum intensity, at which a metal is attracted, is approximately IOOG and did no1 dcpcnd on the particle size of a metad in the same particles. TIe recovered material. that contdined a iron (Fe) over 95% is a metal which is crushed slag by l00G in the multi-stage. If the magnetic field intcns~ty increase, the recovery mcrcasc, but the concentration grade decrease Bewusc thc concentration eams more and more impurities, iron oxide and the coml~ound of alkali earth element. 'll~ercforc If the rccla~nated slag have the multi-stage crushing, the metal is almostly recovered in the crushed slag by lO0G on each particles. If the slag, used as a rcclamatian lhat is a amount of 350,000 tan from I Co., was undcr the multistage crushing and then separaled by 100gauss, it is possible to recova a metal approximately 2.500 Ion, lhat is 0.73% of n ~eclamated slag. in 304.7 mm particles and to recover 4.200 tan in 0.3-1.7 mm particles , that is 1.2% nf a rcclamated slag, in a year. Therefore, ihe told recoverable meld is 6,700 ton, that is 19% of a reclmated slag, in a year, too.

• Wind and Structures
• /
• v.26 no.5
• /
• pp.293-304
• /
• 2018

A numerical study is conducted on the flow characteristics of a rectangular cylinder (chord-to-width ratio C/W = 2 - 10) mounted close to a rigid wall at gap-to-width ratios G/W = 0.25 - 6.25. The effects of G/W and C/W on the Strouhal number, vortex structure, and time-mean drag and lift forces are examined. The results reveal that both G/W and C/W have strong influences on vortex structure, which significantly affects the forces on the cylinder. An increase in G/W leads to four different flow regimes, namely no vortex street flow (G/W < 0.75), single-row vortex street flow ($0.75{\leq}G/W{\leq}1.25$), inverted two-row vortex street flow ($1.25<G/W{\leq}2.5$), and two-row vortex street flow (G/W > 2.5). Both Strouhal number and time-mean drag are more sensitive to C/W than to G/W. For a given G/W, Strouhal number grows with C/W while time-mean drag decays with C/W, the growth and decay being large between C/W = 2 and 4. The time-mean drag is largest in the single-row vortex street regime, contributed by a large pressure on the front surface, regardless of C/W. A higher C/W, in general, leads to a higher time-mean lift. The maximum time-mean lift occurs for C/W = 10 at G/W = 0.75, while the minimum time-mean lift appears for C/W = 2 at the same G/W. The impact of C/W on the time-mean lift is more substantial in single-row vortex regime. The effect of G/W on the time-mean lift is larger at a larger C/W.

• Journal of Chest Surgery
• /
• v.18 no.4
• /
• pp.537-541
• /
• 1985

Recently, we met a 12 year old female patient who suffered from bacterial endocarditis and pericarditis which were complicated by patent ductus arteriosus. She was admitted to our hospital because of dyspnea, fever, headache, and generalized ache for 10 days. The initial diagnosis was bacterial endocarditis and pericarditis complicated by patent ductus arteriosus and congestive heart failure. At first, we tried to treat the patient medically with digitalis, diuretics, and massive antibiotics. On echocardiography large amount of pericardial fluid was accumulated mainly right anterior aspect and also noted a large vegetation at pulmonary valve area. With vigorous medical treatment including repeated pericardiocentesis, the patient showed no improvement. So we decided to perform pericardiectomy for elimination of the most probable septic focus. On operation, we encountered an unpredicted event, the pericardium was thickened, distended, and its surface showed pulsating which meant connecting to systemic circulation. We decided to close the operative wound and reoperate her under cardiopulmonary bypass later. On the next day, we operated her under cardiopulmonary bypass later. On the next day we operated her under cardiopulmonary bypass. The operative findings were ruptured main pulmonary artery about 1.5cm in diameter on its ventral portion, the blood from the ruptured main pulmonary artery was filled up the localized pericardial sac due to previous pericarditis. Through the ruptured main pulmonary artery, we also found 0.5cm diametered patent ductus arteriosus. With the aid of partial cardiopulmonary bypass and inserting 24F ballooned Foley catheter at aorta, pericardiectomy was performed first. After completion of the pericardiectomy, total cardiopulmonary bypass was established. With minimum pump flow [0.3L/min/m2] the PDA was closed with two Teflon-felted 4-0 Prolene interrupted sutures. The ruptured main pulmonary artery was also closed using thickened pericardium with three Teflon-felted 4-0 Prolene interrupted sutures. The operation was successful and postoperative course was uneventful. She was discharged on the 16th POD. We report this case as a very rare secondary complication of bacterial endocarditis complicated by patent ductus arteriosus.

• The Korean Journal of Food & Health Convergence
• /
• v.5 no.3
• /
• pp.1-5
• /
• 2019

The field experiment was conducted in vegetable area, Institute of Horticultural Sciences in University of Agriculture, Faisalabad in order to recognize morphological and fruit growth pattern and yield of Tinda (Praecitrullus fistulosus) gourd germplasm lines. Sixteen germplasm lines in which one line is used as check are included were sown and grown on flat beds in field. The field experiment was arranged as randomized complete block design (RCBD) with three replications. Data on days to maturity, fruit per vine, fruit weight in grams, fruit diameter and total yield obtained were recorded. The fruit texture is marked as phenotype parameter. All parameters were collected and then analyzed statistically. All lines and replications showed different results among each other according to parameter. The maximum DTM (days to maturity), F/P (fruit per plant), FW (fruit weight), FD (fruit diameter) and Yield were recorded was $L_0$ (68.66), $L_3$ (1.66), $L_{10}$ (248.33), $L_{13}$ (8.50) and $L_0$ (599.33) and the minimum were recorded was $L_1$ (56), $L_{11}$ (0.33), $L_0$ (198), $L_9$ (7) and $L_4$ (421) grams respectively. All lines showed smooth texture of fruits with no hairs when mature at harvesting stage.