• Title/Summary/Keyword: minimum $F_0$

Search Result 279, Processing Time 0.04 seconds

Reverse design of photomask for optimum fiedelity in optical lithography (광리소그래피에서 최적 모양의 패턴 구현을 위한 포토마스크 역설계)

  • 이재철;오명호;임성우
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.34D no.12
    • /
    • pp.62-67
    • /
    • 1997
  • The optical lithography wit an ArF excimer laser as a light source is expected to be used in the mass production of giga-bit DRAMs which require less than 0.2.mu.m minimum feature size. In this case, the distortion of a patterned image becomes very severe, since the lithography porcess is performed at the resolution limit. Traditionally, the photomask pattern was designed and revised with trial-and-error methods, such as repeated execution of process simulators or actual process experiments which require time and effort. Ths paper describes a program which automatically finds an optimal mask pattern. The program divides the mask plane into cells with same sizes, chooses a cell randomly, changes the transparent/opaque property of the cell, and eventually genrates a mask pattern which produces required image pattern. The program was applied to real DRAM cell patterns to produce mask patterns which genertes image patterns closer to object images than original mask patterns.

  • PDF

Investigation of Resonant Wavelength Separation in Microband-induced Fiber Gratings

  • Sohn Kyung-Rak;Shim Joon-Hwan;Kim Kwang-Taek
    • Journal of the Optical Society of Korea
    • /
    • v.10 no.2
    • /
    • pp.63-66
    • /
    • 2006
  • In microband-induced fiber gratings, polarization properties and birefringence are investigated as a function of an applied line force. With the transmission curves associated with the maximum and minimum resonant wavelengths, the polarization-dependent behaviors are analyzed. By increasing the transverse line force, the resonance wavelength for an incident light polarized to the same direction of the force is blue-shifted as much as 0.69 nm/(N/cm) while that for the other polarization is insensitive. Using the resonant wavelength separation corresponding to the force variation, the transverse effective index change or modal birefringence variation is obtained. The ratio of modal birefringence versus applied line force is ${\Delta}B/{\Delta}f_x={\sim}8.38{\times}10^{-7}$.

Green Synthesis of Copper Nano-Drug and Its Dental Application upon Periodontal Disease-Causing Microorganisms

  • El-Rab, Sanaa M.F. Gad;Basha, Sakeenabi;Ashour, Amal A.;Enan, Enas Tawfik;Alyamani, Amal Ahmed;Felemban, Nayef H.
    • Journal of Microbiology and Biotechnology
    • /
    • v.31 no.12
    • /
    • pp.1656-1666
    • /
    • 2021
  • Dental pathogens lead to chronic diseases like periodontitis, which causes loss of teeth. Here, we examined the plausible antibacterial efficacy of copper nanoparticles (CuNPs) synthesized using Cupressus macrocarpa extract (CME) against periodontitis-causing bacteria. The antimicrobial properties of CME-CuNPs were then assessed against oral microbes (M. luteus. B. subtilis, P. aerioginosa) that cause periodontal disease and were identified using morphological/ biochemical analysis, and 16S-rRNA techniques. The CME-CuNPs were characterized, and accordingly, the peak found at 577 nm using UV-Vis spectrometer showed the formation of stable CME-CuNPs. Also, the results revealed the formation of spherical and oblong monodispersed CME-CuNPs with sizes ranged from 11.3 to 22.4 nm. The FTIR analysis suggested that the CME contains reducing agents that consequently had a role in Cu reduction and CME-CuNP formation. Furthermore, the CME-CuNPs exhibited potent antimicrobial efficacy against different isolates which was superior to the reported values in literature. The antibacterial efficacy of CME-CuNPs on oral bacteria was compared to the synergistic solution of clindamycin with CME-CuNPs. The solution exhibited a superior capacity to prevent bacterial growth. Minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and fractional inhibitory concentration (FIC) of CME-CuNPs with clindamycin recorded against the selected periodontal disease-causing microorganisms were observed between the range of 2.6-3.6 ㎍/ml, 4-5 ㎍/ml and 0.312-0.5, respectively. Finally, the synergistic antimicrobial efficacy exhibited by CME-CuNPs with clindamycin against the tested strains could be useful for the future development of more effective treatments to control dental diseases.

Root zone environments in two cropping system within a year for Kyoho grapes (포도 '거봉'의 2기작 재배에서 근권환경 특성)

  • 오성도;김용현
    • Journal of Bio-Environment Control
    • /
    • v.6 no.4
    • /
    • pp.235-241
    • /
    • 1997
  • This study was performed to investigate the behaviour of root zone environments under the control of soil temperature and tension of soil moisture near the root Bone of 'Kyoho' grapes tree grown on restricted root zone system in plastic greenhouse. Maximum diurnal air temperature inside plastic greenhouse ranged between 25.1 and 32.7$^{\circ}C$, and the average of nocturnal air temperature inside plastic greenhouse maintained at 18$^{\circ}C$ in winter season. Also the minimum diurnal relative humidity ranged between 50 and 55%, and the maximum nocturnal relative humidity ranged between 84 to 87%. At a depth of 15cm from soil surface, the average soil temperature maintained at 25.6$^{\circ}C$ for under-ground heating, and appeared to 17.4$^{\circ}C$ for unheated condition. Although the tension of soil moisture just after irrigation sharply decreased to pF 1.5, the tension of soil moisture at the depth of 15cm maintained at pF 2.0~2.2. It is suggested that the tension of soil moisture at the depth of 15cm might be used as the standard for the determination of irrigation set point. Effective drainage system is needed to prevent the spindly and succulent growth of vine trees grown in restricted root zone system.

  • PDF

Nonhomogeneity of the Electrical Properties with Deposition Position in an ITO Thin Film Deposited under a Given R.F. Magnetron Sputtering Condition (동일 증착 조건의 스퍼터링에 의해서 제작된 Indium Tin 산화물 박막의 증착위치에 따른 전기적 특성의 불균질성)

  • 유동주;최시경
    • Journal of the Korean Ceramic Society
    • /
    • v.38 no.11
    • /
    • pp.973-979
    • /
    • 2001
  • Tin-doped indium oxide (ITO) thin films were deposited using r.f. magnetron reactive sputtering and the electrical properties, such as the resistivity, carrier concentration and mobility, were investigated as a function of the sample position under a given magnetron sputtering condition. The nonhomogeneity of the electrical properties with the sample position was observed under a given magnetron sputtering condition. The resistivity of ITO thin film on the substrate which corresponded to the center of the target had a minimum value, 2∼4$\times$10$\^$-4/$\Omega$$.$cm, and it increased symmetrically when the substrate deviated from the center. The density measurement result also showed that ITO thin film deposited at the center has a maximum density of 7.0g/cm$^3$, which was a relative density of about 97%, and the density decreased symmetrically as the substrate deviated from the center. The nonhomogeneity of electrical properties with the deposition position could be explained with the incidence angle of the source beam alpha, which is related with an atomic self-shadowing effect. It was confirmed experimentally that the density in film affect both the carrier mobility and the conductivity. In the case where the density of ITO thin film is 7.0g/cm$^3$, the magnitude of the mean free path was identical with that of the grain size(the diameter of column). However, in the other cases, the mean free path was smaller than the grain size. These results showed that the scattering of the free electrons at the grain boundary is the major factor for the electrical conduction in ITO thin films having a high density, and there exists other scattering sources such as vacancies, holes, or pores in ITO thin films having a low density.ing a low density.

  • PDF

In-Vitro, Anti-Bacterial Activities of Aqueous Extracts of Acacia catechu (L.F.)Willd, Castanea sativa, Ephedra sinica stapf and shilajita mumiyo Against Gram Positive and Gram Negative Bacteria

  • Dashtdar, Mehrab;Dashtdar, Mohammad Reza;Dashtdar, Babak;shirazi, Mohammad khabaz;Khan, Saeed Ahmad
    • Journal of Pharmacopuncture
    • /
    • v.16 no.2
    • /
    • pp.15-22
    • /
    • 2013
  • Objective: Evaluations of the in-vitro anti-bacterial activities of aqueous extracts of Acacia catechu (L.F.)Willd, Castanea sativa, Ephedra sinica stapf and Shilajita mumiyo against gram-positive bacteria (Staphylococcus aureus, Streptococcus pneumonia) and gram-negative bacteria (Escherichia coli, klebsiella pneumoniae, Proteus mirabilis, Pseudomonas aeruginosa) are reasonable since these ethnomedicinal plants have been used in Persian folk medicine for treating skin diseases, venereal diseases, respiratory problems and nervous disorders for ages. Methods: The well diffusion method (KB testing) with a concentration of $250{\mu}g/disc$ was used for evaluating the minimal inhibitory concentrations (MIC). Maximum synergistic effects of different combinations of components were also observed. Results: A particular combination of Acacia catechu (L.F.) Willd, Castanea sativa, Ephedra sinica stapf and shilajita mumiyo extracts possesses an outstanding anti-bacterial activity. It's inhibiting effect on microorganisms is significant when compared to the control group (P<0.05). Staphylococcus aureus was the most sensitive microorganism. The highest anti-bacterial activity against gram-positive bacteria (Staphylococcus aureus, Streptococcus pneumonia) or gram-negative bacteria (Escherichia coli, Klebsiella pneumonia, Proteus mirabilis, and Pseudomonas aeruginosa) was exerted by formula number 2 (table 1). Conclusion: The results reveal the presence of anti-bacterial activities of Acacia catechu, Castanea sativa husk, Ephedra sp. and Mumiyo against gram-positive and gram-negative bacteria. Synergistic effects in a combined formula, especially in formula number 2 (ASLAN$^{(R)}$) can lead to potential sources of new antiseptic agents for treatment of acute or chronic skin ulcers. These results considering the significant anti-bacterial effect of the present formulation, support ethnopharmacological uses against diarrheal and venereal diseases and demonstrate use of these plants to treat infectious diseases.

Volumetric Blood Velocity Measurement on Multigate Pulsed Doppler System based on the Single Channel RF Sampling using the Optimized Sampling Factor (최적화된 샘플링 인수를 갖는 단일 채널 RF 샘플링 방식의 다중점 펄스 도플러 시스템을 사용한 혈류 속도분포 측정)

  • 임춘성;민경선
    • Journal of Biomedical Engineering Research
    • /
    • v.19 no.2
    • /
    • pp.143-152
    • /
    • 1998
  • In this paper, we present the performances of a Doppler system using single channel RF(Radio Frequency) sampling. This technique consists of undersampling the ultrasonic blood backscattered RF signal on a single channel. Conventional undersampling method in Doppler imaging system have to use a minimum of two identical parallel demodulation channels to reconstruct the multigate analytic Doppler signal. However, this system suffers from hardware complexity and problem of unbalance(gain and phase) between the channels. In order to reduce these problems, we have realized a multigate pulsed Doppler system using undersampling on a single channel, It requires sampling frequency at $4f_o$(where $f_o$ is the center frequency of the transducer) and 12bits A/D converter. The proposed " single-Channel RF Sampling" method aims to decrease the required sampling frequency proportionally to $4f_o$/(2k+1). To show the influence of the factor k on the measurements, we have compared the velocity profiles obtained in vitro and in vivo for different intersequence delays time (k=0 to 10). We have used a 4MHz center frequency transducer and a Phantom Doppler system with a laminar stationary flow. The axial and volumetric velocity profiles in the vessel have been computed according to factor k and have been compared. The influence of the angle between the ultrasonic beam and the flow axis direction, and the fluid viscosity on the velocity profiles obtained for different values of k factor is presented. For experiment in vivo on the carotid, we have used a data acquisition system with a sampling frequency of 20MHz and a dynamic range of 12bits. We have compared the axial velocity profiles in systole and diastole phase obtained for single channel RF sampling factor.ng factor.

  • PDF

A Study of Teaching Effectiveness on Clinical Nursing Education (임상간호 실습교육의 교수효율성에 관한 연구)

  • 김미애
    • Journal of Korean Academy of Nursing
    • /
    • v.26 no.4
    • /
    • pp.946-962
    • /
    • 1996
  • The purpose of this study was to contribute to the development of clinical instruction by students' ratings of teaching effectiveness in clinical nursing education. The subjects were comprised of graduating class 618 students from 24 nursing colleges in the nation. The instruments used in this study were "general characteristics & status of clinical nursing education" developed by the researcher and "Instrument to Measure Effectiveness of Clinical Instructors" by Reeve(1994). The 50 questions used in the questionaire were categorized into 13 components subject to factor analysis. The 13 components were interpersonal relationships, communication skills, role model, resource for students, favorable to students, encouraging to think for selves, teaching methods, evaluation, finding assignments for objectives, organization of subject matter, professional competence, knowledge of subject matter & working with agency personnel. The results of this study are as follows 1. Status of clinical nursing educaion : 1) Clinical nursing education were led by nursing professors(44.9%), a team of both nuring professor & head nurse(6.8%), instructors from specific hospital(15.1%), instuctos for a specific subject(14.6%), & head nurse(6.8%). For 3-year program students, 34.6% of the clinical nursing education were led by instructors from specific hospital & 51.4% of the education by nursing professors for Bachelor's program. 2) The contents for clinical education comprised of Conference being the most frequent of 34.5% ; a combination of Nursing skills, Orientation, Conference etc.22.0% : Nursing process 21.7% : Orientation 13.5% : Inspection(making rounds ) 6.4%, & Nursing skills of 2% being the least frequent. 3) Students' preference of clinical teachers from the highest to the lowest were instructors for a specific subject being the most desired (44.9%) followed by nursing professor, head nurse, a team of both nursing professor & head nurse, & instructors from specific hospital being the least desired. 4) Students felt that the qualification for clinical teachers should be at least a master's degree holder and 5 or more years of clinical experience. The reason they felt was because knowledge & experience are imperative for professional education. 2. Clinical teaching effectiveness : The total points for teaching effectiveness was 147.97(mean of 2.95±0.98) where the total score is considered to be an average rating. 3. Teaching effectiveness as status of clinical nursing education : 1) The score ratings for the clinical instructors from the highest to the lowest were as follows : instructors for a specific subject, instructors from specific hospitals, a team of both nursing professors & head nurses, nursing professors, head nurses, which resulted in significunt difference(F=4.53, P<0.001). 2) The rating scores based on the teaching program from the highest to the lowest were as follws ; nursing skills, nursing process, a combination of nursing skills, orientation, conference etc. , conferences, orientation, inspection, which resulted in significunt difference(F=10.97, P<0.001). 4. Based on 13 categorized components from the questionaires, questions related to communication skills scored the highest points of 3.20 where inquiries regarding resource for students scored the lowest points of 2.38. 5. Among the 13 categorial components from the questionaire, Interpersonal relationship, Communication skills, Resource for students, Encouraging to think for selves, Evaluation, Teaching method, Finding assignment for objectives, Organization of subject matter, Professional competence, & Working with agency personnel, instructors for a specific subject scored the highest points and head nurse scored the lowest, which resulted in significant difference. Favorable for students, instructors for a specific subject scored highest points and nursing professor scored the lowest, which resulted in significant deference (F=5.39, P<0.001). Role model & Professional competence, instructors for a specific subject scored the highest points and head nurse scored the lowest, with minimum variation(F=1.29, P>0.05 : F=1.64, P>0.05) 6. Based on 13 categorial components as a whole, the highest points scored among the 5 groups of clinical teachers was instructors for a specific subject and the lowest, by head nurse(F=1.94, P<0. 001). A team of both nursing professor & head nurse attained higher score in clinical education than their independent education.

  • PDF

Effect of top dressing of Compound Fertilizer Containing nitrate (Ammonium Nitrate Sulfate) on Paddy Rice (수도용(水稻用) 질산태질소함유(窒酸態窒素含有) 복합비료(複合肥料)의 추비효과(追肥效果))

  • Kim, Jeong-Je;Jang, Yong-Seon;Cho, Byong-Ok;Huh, Beom-Lyang
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.21 no.3
    • /
    • pp.289-295
    • /
    • 1988
  • An ordinary paddy variety Hwaseong and a high-yielding variety Samgang were taken under investigation to test the effect of top dressing of newly formulated three compound fertilizers on rice plants for at sprouting heads. The fertilizer formulate used were C. F. I (14-0-14; $NO_3-N$ and $NH_4-N$) and C. F. II (14-0-14; $NH_4-N$ only) and C. F. III (14-0-14 + OM 10%; $NO_3-N$ and $NH_4-N$). A field experiment was conducted on a plot of Gyuam series. The following results were obtained: 1. Effects of compound fertilizers at sprouting heads a. Hwaseong variety exhibited 5-10% yielding increases on the plots with application of 2nd compound fertilizer (I) and (II) compared to straight fertilizer of (I) and (III). Fertilization with 2nd and 3rd compound fertilizers gave the best result when they are done 15 days before heading. A yield increase of 3-5% was achieved when the fertilization was done 20 days before heading in the case of Samgang variety, but no beneficial effect was observed with an application 10 days before heading. b. Rate of barren grains was at the minimum in the compound fertilizer (II) plots of both Hwaseong and Samgang varieties. c. Content of $NO_3-N$ in soils and grain yield appeared to be positively correlated($r=0.618^*$) 2. Effects of heading fertilizers on artificially reduced conditions of soil a. No significant difference in Eh values were measured among reduced paddy soils. The compound fertilizer of (II) presented the best result in yield increases regardless of rice variety. b. Rate of barren grains in both varieties was observed at the minimum on the application of compound fertilizer of (II). c. No great difference of mineral contents was detected among plants from different treatments.

  • PDF

Fabrication of a Subminiature 3 Dimensional Antenna for the Mobile Phone Handset (이동 통신 단말기용 초소형 3차원 안테나 제작)

  • Hong, Min-Gi;Son, Tae-Ho
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.12
    • /
    • pp.1455-1461
    • /
    • 2008
  • We implemented a subminiature internal antenna that is around 1 cc volume for the mobile phone. The fundamental type of studied antenna is IFA(Inverted F Antenna), and this antenna is designed to be improved efficiency and gain due to minimum current cancellation by the avoidance of multiple bending pattern. For the implementation of multiple band, helix is applied to compensate for short antenna length for low frequency band, and a 3 dimensional pattern is used for high frequency band. We made two kinds of 3D structure antenna. One is a 1 cc volume antenna for GSM/DCS band on the bare board set, and the other is a 1.5 cc volume for the GSM/USPCS mobile phone set. Measurements showed good gain performance that average gain of two antenna on each band are $-3.46{\sim}-0.45\;dBi$ and $-4.80{\sim}-3.29\;dBi$ respectively.