• 한국멀티미디어학회논문지
• /
• 제7권11호
• /
• pp.1531-1539
• /
• 2004

본 논문은 입술의 경계선을 효과적으로 추출하는 방법을 제안하였다. 입술 형태는 PDM(Point Distribution Model)과 주성분 분석법을 이용하여 표현하고 입술 경계선은 GLDM(Gray Level Distribution Model)을 기반으로 표현하였다 입술 경계선 추출은 모델에 대한 입력영상의 정확도에 대한 목적함수를 최적화하는 문제로 단순화하였으며, 최적화를 위해 다운힐 심플렉스(Down Hill Simplex) 알고리즘을 이용하였다. 탐색과정에서 지역 최소점으로 수렴하는 문제를 해결하기 위하여 입술 형태 모델의 형태계수를 GMM(Gaussian Mixture Model)을 이용하여 표현하였다. 형태계수에 대한 GMM을 이용하여 입술의 대략적인 형태를 찾고, 이때 사용된 mixture 성분을 이용하여 탐색과정에서 입술의 형태를 조정함으로써 지역 최소점에 수렴하여 입술의 정확한 위치를 찾지 못하는 문제점을 해결하였다. 여러 영상을 대상으로 실험하여 좋은 결과를 얻었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.152-159
• /
• 1994

One of the main objectives of the study is to propose a pratical and realistic reliability analysis by ETCM(Expected Total Cost Minimization). This study is intended to propose the safety assesment and capacity rating of existing reinforced concrete members by evaluating the safety evaluation index, that is RF(Rating Factor) from the results of the field test and inspection for 5 reinforced concrete bridges. ETCM method is used for the reliability analysis of the proposed models. The proposed reliability model and method are applied the safety assesment and system factors of reinforced concrete members.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.252-255
• /
• 2009

This paper proposes a new loss minimization controller (LMC) for induction motor drive. The proposed LMC presents a strategy to minimize the total power losses of induction motor (IM), which is based on simplified equivalent circuit and simplified model of IM. The proposed controller using the field oriented control (FOC) method is to determine an optimal rotor flux for obtaining the minimum total power losses and higher efficiency. Simulation and experimental results are given to validate the effectiveness of the proposed method.

• 정보처리학회논문지B
• /
• 제11B권3호
• /
• pp.281-288
• /
• 2004

본 논문은 외부 자극에 대한 생물 행동의 복잡하고 다양한 특징들을 추출하고 분석하기 위한 방법을 제안한다. 이를 위해 물 속 생물인 깔따구의 행동궤적으로부터 얻어 낸 속도 벡터의 위상영상에 적응적이고 수리적인 방법인 에너지 최소화 모델을 적용한다. 즉, 다이아지논이라는 약물이 처리되기 전과 후의 깔따구의 행동궤적의 특징을 위상영상으로부터 찾아내어 행동 패턴을 분류하고 이 약물에 대한 깔따구의 적응적 행동 특징을 추출하는 것이다. 특징추출을 위해 도입한 방법은 T. Chan과 L. Vese에 의해 제안된 개선 Active Contour 모델에 근거한 것으로 Active Contour를 진화시키는 과정에서 생성되는 에너지함수 값의 변화를 이용한 것이다. Active Contour 모델이란 주어진 영상에 놓인 커브를 그 커브에 의해 분할된 부분영상들의 에너지 값들의 합을 최소화하는 방향으로 변화하게 함으로써 영상 내 객체의 경계를 찾는 영상분할 방법이다. 깔따구의 행동궤적 데이터는 CCD 카메라를 통해 0.25초 간격으로 약물을 처리하기 전과 후 4일 간을 관찰하여 획득하고, 이 행동궤적 데이터에서 행동의 특징 요소가 되는 속도벡터 성분을 15-20분 간격으로 추출하여 위상영상을 만든다. 그리고 이 위상영상에 Active Contour를 적용함으로써 시간에 따라 감소하는 에너지 함수 값의 그래프에서 구해진 기울기 변화에 대한 수리적 계산과 분석을 통해 깔따구 행동궤적의 특징을 찾고 행동 패턴을 분류한다. 또한, 에너지 최소화 모델은 약물 처리된 깔따구의 반응적인 행동이 이에 적응하고 있음을 효과적으로 보여준다.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.305-314
• /
• 2007

This paper considers single machine scheduling problems where the processing time of a job increases as a function of its position in the sequence. In this model, the later a given job is scheduled in the sequence, the longer its processing time. It is shown that the optimal schedule may be very different from that of the classical version of the problem. We introduce polynomial solutions for the makespan minimization problem, the sum of completion times minimization problem and the sum of earliness penalties minimization problem. For two resource constrained problems, based on the analysis of the problems, the optimal resource allocation methods are presented, respectively.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권7호
• /
• pp.329-334
• /
• 2005

This paper presents the optimal design for reducing the rotor inertia in order to improve the driving characteristic of BLDC motor for robots. The parallel Genetic Algorithm is performed to rotor inertia minimization in optimal design. Also, velocity profile with finite jerk method is introduced to reduce vibration of BLDC motor. As a result, a torque characteristic is same although rotor inertia is reduced to 2/3 compared with prototype model. And, maximum vibration value is reduced by 63.4[$\%$] according to the application of finite .jerk method.

• 소음진동
• /
• 제9권1호
• /
• pp.131-140
• /
• 1999

A method to reconstruct the sound field around a Korean bell is developed. The sound radiation problem is formulated based on the boundary element method by using the algorithm of the acoustical holography. Sound pressures at the hologram surface are measured and used as input data for the analysis program that was developed in this study. An error minimization scheme is presented to overcome difficulties that arise in the backward reconstruction of the BEM-based acoustical holography In the model fictitious source surfaces were also introduced to reduce the complexity stemmed from the source shape. The sound field associated with the (4.0) vibrational mode of the Korean bell was visualized and verified experimentally.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1114-1123
• /
• 2017

A linear permanent-magnet vernier (LPMV) motor has magnets and windings in the short mover, which is very suitable for long stroke applications. This paper proposed a new field oriented control with space vector pulse width modulation for the LPMV motor, which considers loss minimization. First, the topology of the LPMV motor is briefly presented. Then, the mathematical model is derived, and the mover field oriented control strategy is proposed. Also, the loss analysis is performed. Finally, the simulated and experimental results are given, verifying the feasibility and effectiveness of the proposed control strategy.

• 조명전기설비학회논문지
• /
• 제28권7호
• /
• pp.48-54
• /
• 2014

This paper discusses study of torque ripple minimization employing an improved TDF(torque distribution function)-based instantaneous torque control to reduce acoustic noise and vibration problem of the SRM. As the flux linkage of the SRM is a nonlinear function of phase current and rotor position, design of optimal controller for the SRM is quite complicated. Hence, an accurate mathematical model considering the nonlinearity of the SRM is required. An improved TDF based torque control has been proposed in order to reduce the toque ripple at high speed operation. Dynamic simulation using Matlab/Simulink as well as Finite Element Analysis is presented. A prototype SRM for electric vehicle traction has been manufactured to validate the experimental results comparing the dynamic simulation results.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.411-419
• /
• 2016

This article investigates the problem of distributed channel selection in opportunistic spectrum access networks from a perspective of interference minimization. The traditional physical (PHY)-layer interference model is for information theoretic analysis. When practical multiple access mechanisms are considered, the recently developed binary medium access control (MAC)-layer interference model in the previous work is more useful, in which the experienced interference of a user is defined as the number of competing users. However, the binary model is not accurate in mathematics analysis with poor achievable performance. Therefore, we propose a real-valued one called stochastic MAC-layer interference model, where the utility of a player is defined as a function of the aggregate weight of the stochastic interference of competing neighbors. Then, the distributed channel selection problem in the stochastic MAC-layer interference model is formulated as a weighted stochastic MAC-layer interference minimization game and we proved that the game is an exact potential game which exists one pure strategy Nash equilibrium point at least. By using the proposed stochastic learning-automata based uncoupled algorithm with heterogeneous learning parameter (SLA-H), we can achieve suboptimal convergence averagely and this result can be verified in the simulation. Moreover, the simulated results also prove that the proposed stochastic model can achieve higher throughput performance and faster convergence behavior than the binary one.