• Journal of the Korea Society for Simulation
• /
• v.29 no.4
• /
• pp.95-109
• /
• 2020

In this paper, an optimal manufacturing system design problem in an automotive body assembly lines is introduced when various costs such as equipment investment costs are considered. Meta-model methodology based on simulation results has been used for estimating the performances of the system such as production rate and work-in-process levels. The objective function is minimizing total cost which satisfies the target production rate. The investment costs such as robots, buffers, transportation equipment, and the inventory holding cost of work-in-process have been included in the objective function. Harmony search method has been used for optimization.

• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.2
• /
• pp.262-274
• /
• 2013

Heavy rain and heavy snow as representative extreme weather are recently an issue in urban area. The paper aims at modeling the scenarios of evacuation that minimizes economic loss of the designated urban area with improving travel efficiency by providing road closure information facing an extremely heavy rainfall. The paper develops a model by using a NetLogo toolkit applied to the study area of Seocho-dong, Seocho-gu, Seoul. The model conducts a simulation of travel time under different scenarios of information provision. The simulation results show that it is efficient to provide the information of road closure to 20~40% of the drivers under the scenario of humid road or rainfall less than 20mm, whereas to 40~60% of the drivers under the scenario of heavy rainfall more than 20mm.

• Journal of Korean Society for Quality Management
• /
• v.43 no.4
• /
• pp.533-544
• /
• 2015

Purpose: The purpose of this study is to analyze the cost efficiency of food industry in JeollaNamdo. And this study is focused on the correlation between the economic efficiency of food industry and its cost efficiency, based on the analysis of 372 food companies' data in JeollaNamdo in 2012. Methods: DEA cost minimization is the measurement of the cost efficiency of JeollaNamdo food industry in 2012. In this study, the CCR and BBC models have been employed to analyze the decomposing cost efficiency-technical efficiency, allocative efficiency, and scale efficiency respectively. And the Spearman rank correlation and Wilcoxon signed rank test also have been employed to check the correlation and difference between the ranking orders based on the efficiency scores respectively. Results: For the CCR model, mean cost efficiency was found to be 0.084(0.54 for allocative efficiency and 0.19 for technical efficiency). For the BCC model, mean cost efficiency was found to be 0.252(0.453 for allocative efficiency and 0.564 for technical efficiency). Average scale efficiency was found to be 0.38. In analyzing the results, this study argues that the optimal way to improve cost efficiency is by reducing inputs proportionally and changing their combination. Conclusion: The efficiency scores of the two models show high correlation, whereas, the differences between them are also found to be significant. Hence, it should be cautious to select a suitable model when we do the research.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.13-23
• /
• 2011

Grid computing is a new generation computing technology which organizes virtual high-performance computing system by connecting and sharing geographically distributed heterogeneous resources, and performing large-scaled computing operations. In order to maximize the performance of grid computing, job scheduling is essential which allocates jobs to resources effectively. Many studies have been performed which minimize total completion times, etc. However, resource costs are also important, and through the minimization of resource costs, the overall performance of grid computing and economic efficiency will be improved. So in this paper, we propose a multi-objective job scheduling model considering both time and cost. This model derives from the optimal scheduling solution using NSGA-II, which is a multi objective genetic algorithm, and guarantees the effectiveness of the proposed model by executing experiments with those of existing scheduling models such as Min-Min and Max-Min models. Through experiments, we prove that the proposed scheduling model minimizes time and cost more efficiently than existing scheduling models.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.237-244
• /
• 2011

In this paper, a feature-based registration technique is proposed for pre-contrast and post-contrast lung CT images. It utilizes three dimensional(3-D) features with their descriptors and estimates feature correspondences by nearest neighborhood matching in the feature space. We design a transformation model between the input image pairs using a free form deformation(FFD) which is based on B-splines. Registration is achieved by minimizing an energy function incorporating the smoothness of FFD and the correspondence information through a non-linear gradient conjugate method. To deal with outliers in feature matching, our energy model integrates a robust estimator which discards outliers effectively by iteratively reducing a radius of confidence in the minimization process. Performance evaluation was carried out in terms of accuracy and efficiency using seven pairs of lung CT images of clinical practice. For a quantitative assessment, a radiologist specialized in thorax manually placed landmarks on each CT image pair. In comparative evaluation to a conventional feature-based registration method, our algorithm showed improved performances in both accuracy and efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3508-3517
• /
• 2013

District is not only a place that every urban activities are executing but also basic unit that are forming urban structure. Therefore this study tried to make land use-transportation model through analyzing $CO_2$ exhausting volumes by assuming 270 scenarios those are postulated various land use patterns and transport policies in District. As results, this study shows best District Unit Design technique is the policy that develop equally all blocks or only outer blocks and introduction of car free zone to inner 2 way streets. Most important policy in order to reduce $CO_2$ gas is to introduce Transportation Demand Management especially in case of hyper high density development. In case of low density development, policy of car free streets in 2 ways roads is efficiency for reducing $CO_2$ gas. And suggested land use-transportation model will be good for choosing alternatives those are able to reduce $CO_2$ in District Unit.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.1
• /
• pp.115-122
• /
• 2011

Recently, we have proposed a hypothesis that spinal structures have a stress sensor driving feedback mechanism, In the human spine, spinal structure could react to modify muscular action in such a way so as to equalize stress at the disc, therefore reduce the risk of injury, In this analysis, abdominal muscle and abdominal pressure, which were not included in the previous study, were added to identify those effects in spine stability during upright stance posture for the case where the intervertebral disc plays the role of mechanoreceptor, The musculoskeletal FE model was consisted with detailed whole lumbar spine, pelvis, sacrum, coccyx and simplified trunk model. Muscle architecture with 46 local muscles containing paraspinal muscle and 6 rectus abdominal muscles were assigned according to the acting directions. The magnitude of 4kPa was considered for abdominal pressure. Minimization of the nucleus pressure deviation and annulus fiber average tension stress deviation was chosen for cost function. Developed model provide nice coincidence with in-vivo measurement (nucleus pressure). Analysis was conducted according to existence of co-activation of abdominal muscle and abdominal pressure. Antagonistic activity of abdominal muscle produced stability of spinal column with relatively small amount of total muscle force. In contrast to the abdominal muscle, effect of abdominal pressure was not clear that was partly depending on the assumption of constant abdominal pressure.

• The KIPS Transactions:PartD
• /
• v.14D no.6
• /
• pp.689-700
• /
• 2007

Organizations and customers lose if business activities we discontinued by an incident of information systems under the current business environment because they pursue real time enterprise and on demand enterprise. The loss includes the intangible decline in brand image, customer separation, and the tangible loss such as decrease in business profits. Thus. it is necessary to have preparedness in advance and mitigation for minimization of a loss due to the business discontinuity and information system's operational risks. This paper suggests the mitigation model for minimizing the incidents of disk unit in information system's operational risks. The model will be represented by a network model which is composed of the three items as following: (1) causes, attributes, indicators of an operational risk, (2) a periodic time through an analysis of historical data, (3) an index or a regulation related to the examination of causes of an operational risk.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.87-94
• /
• 2017

Many industrial accidents have occurred continuously in the manufacturing industries, construction industries, and service industries of Korea. Fatal accidents have occurred most frequently in the construction industries of Korea. Especially, the trend analysis of the accident rate and fatal accident rate is very important in order to prevent industrial accidents in the construction industries systematically. This paper considers forecasting of the accident rate and fatal accident rate with static and dynamic time series analysis methods in the construction industries. Therefore, this paper describes the optimal accident rate and fatal accident rate by minimization of the sum of square errors (SSE) among regression analysis method (RAM), exponential smoothing method (ESM), double exponential smoothing method (DESM), auto-regressive integrated moving average (ARIMA) model, proposed analytic function model (PAFM), and kalman filtering model (KFM) with existing accident data in construction industries. In this paper, microsoft foundation class (MFC) soft of Visual Studio 2008 was used to predict the accident rate and fatal accident rate. Zero Accident Program developed in this paper is defined as the predicted accident rate and fatal accident rate, the zero accident target time, and the zero accident time based on the achievement probability calculated rationally and practically. The minimum value for minimizing SSE in the construction industries was found in 0.1666 and 1.4579 in the accident rate and fatal accident rate, respectively. Accordingly, RAM and ARIMA model are ideally applied in the accident rate and fatal accident rate, respectively. Finally, the trend analysis of this paper provides decisive information in order to prevent industrial accidents in construction industries very systematically.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.57-67
• /
• 1998

In order to extract the contour of interesting object in the image, Kass suggested the Active Contour Model called "Snakes" The speed of this model is slow and this model is sensitive of initialization. In order to improve these problems, Gunn extracted the accurate contour by using two initializations, and operated to less sensitive of initialization. This method could extract more accurate contour than the existing method, but it had no effect in the speed and it was sensitive of noise. This paper applied to the Energy Minimization Algorithm about only the pixel within the window applying the window of $8{\times}8$ size at each contour point consisting Snakes in order to solve these problems. In order to less sensitive of noise which exists within image, it suggests a method that moves the window to vertical direction for the gradient of each contour point.our point.