• 구강회복응용과학지
• /
• 제34권4호
• /
• pp.297-305
• /
• 2018

목적: 다양한 형태의 공동 설계 및 재료를 이용한 하악 대구치의 치아 구조 및 intracoronal 수복물에서 발생하는 응력 분포 및 최대 von Mises 응력을 분석하고자 하였다. 연구 재료 및 방법: 콤포지트레진 및 금으로 수복한 통상적 교합면 와동과(OR-C, OG-C) 인접면 와동(MR-C, MG-C) 및 콤포지트레진으로 충전한 최소 침습적 와동을 갖는 교합면 와동(OR-M) 및 인접면 와동(MR-M)의 형상을 하악 삼차원 입체 모델로 설계했다. 저작력을 부여하기 위해 총 교합력 200 N의 정적 축 방향 하중을 10개의 교합 접촉점에서 치아에 적용했다. 유한 요소 해석은 교합 하중에 의해 생성 된 응력 분포를 예측하기 위해 수행되었다. 결과: 최소 침습적 설계를 가진 수복물은 통상적 와동 설계(341.9 MPa - 397.2 MPa)에 비해 von Mises 응력(OR-M 모델: 26.8 MPa, MR-M 모델: 72.7 MPa)의 값이 현저하게 낮았다. 치아 내부에서 최대 von Mises 응력의 크기는 통상적 와동 설계(372.8 - 412.9 MPa) 및 최소 와동 설계(361.1 - 384.4 MPa) 모델에서 유사했다. 결론: 최소 침습성 모델은 수복물 중에서 최소의 von Mises 응력이 생성되었다. 법랑질 내에서는 최대 von Mises 응력이 최소 공동 설계와 기존 설계의 모델에서 유사한 크기로 관찰되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.33-33
• /
• 1999

The design of a vacuum pumping system for the KOMAC (Korea Multipurpose Accelerator Complex) RFQ(Radio-Frequency Quadrupole) linac is described. [Fig] Resulted from the lost proton beam, gas streaming from the LEBT (Low Energy Beam Transport) and out-gassing from the surfaces of the RFQ cavity and vacuum plumbing, the total gas load will be on the order of 7.2$\times$10-4 Torr-liters/sec, consisting mainly of hydrogen. The system designed to pump on a continual basis with redundancy to ensure that the minimal operating vacuum level of 1.0$\times$10-6 Torr is maintained even under abnormal conditions. Details of the design, performance analysis and the preliminary test results of the cryogenic pumps are presented.

• 소성∙가공
• /
• 제22권4호
• /
• pp.183-188
• /
• 2013

Scroll compressors are widely used in air conditioning systems and in automobiles due to their low pressure loss, minimal vibrations, and light-weight. Open-die forging with back pressure is used to forge the rotating scroll, and it requires special care since the forging die can be severely damaged at the fixed end of the spiral cavity similar to a fracture of a cantilever beam. To overcome the inevitable weakness of the forging die due to such damage, an innovative design is necessary. In this study, structural analysis using the finite element method was conducted to determine the reason for the fracture of the forging die. A novel design to avoid stress concentrations and vertical deflection, causing serious damage to the die, is suggested.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.59-63
• /
• 2014

Object of this study is to see whether the arc-groove on a D-shape bluff body effects the drag reduction or not. To this end, the changes of the boundary layer on the surface of the object, the downstream flow field and wake flow were found by experiments. The experiments are conducted by changing number and depth of the groove, angle of the first groove and Reynolds number(Re). Groove did not effect on the surface in the downstream boundary layer of the object and was minimal impact on the time mean velocity recovery of the wake flow. Also the effects of Groove did not have a significant impact on the structure of the wake and the wake frequency. Therefore it is found that the arc-groove of the drag reduction effect on the D-shape bluff body was smaller.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.250-260
• /
• 2015

Purpose: Dual cylindrical microwave chambers equipped with an ohmic heating tube were designed and fabricated to maximize the electric field strength for expeditious heat treatment of particulate foods. Methods: The efficacy of the combination heater was investigated by simulating the electric field distribution by using COMSOL Multiphysics software. Results: All components of the designed microwave heating unit were suitable for transmitting maximal microwave power to the load. The simulated electric field distribution implied that single-mode microwave heating would be sufficient for the steady generation of a highly localized heating zone in the cavity. During impedance matching, the calculated reflection coefficient ($S_{11}$) was small, possibly implying minimal power loss and wave reflection in the designed microwave heating chamber. Conclusions: This study demonstrates the possibility of concentrating the microwave power at the centerline for a single-frequency microwave, for thermal treatment of multiphase foods without attenuating the microwave power.

• 한국염색가공학회지
• /
• 제35권2호
• /
• pp.107-120
• /
• 2023

The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing's allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.