• Advances in concrete construction
• /
• v.8 no.2
• /
• pp.119-126
• /
• 2019

This paper reports an experimental investigation conducted to evaluate the durability performance of concrete mixtures prepared utilizing blends of Type I Portland cement (OPC) and natural pozzolans (NPs) obtained from three different sources in Saudi Arabia. The control concrete mixture containing OPC alone as the binder and three concrete mixtures incorporating NPs were prepared keeping water/binder ratio of 0.4 (by weight), binder content of $370kg/m^3$, and fine/total aggregate ratio of 0.38 (by weight) invariant. The compressive strength and durability properties that included depth of water penetration, depth of carbonation, chloride diffusion coefficient, and resistance to reinforcement corrosion and sulfate attack were determined. Results of this study indicate that at all ages, the compressive strength of NP-admixed concrete mixtures was slightly less than that of the concrete containing OPC alone. However, the concrete mixtures containing NP exhibited lower depth of water penetration and chloride diffusion coefficient and more resistance to reinforcement corrosion and sulfate attack as compared to OPC. NP-admixed concrete showed relatively more depth of carbonation than OPC when subjected to accelerated carbonation. The results of this investigation indicates the viability of utilizing of Saudi natural pozzolans for improving the durability characteristics of concrete subjected to chloride and sulfate exposures.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.93-107
• /
• 2005

The estuary of Nakdong River area including Noksan industrial complex and Busan New Port is composed of thick unconsolidified sediments containing abundant clay, and thus is a potential hazardous area of ground subsidence. We analyzed mineral compositions and geotechnical properties of the clay sediments that sampled from 4 boreholes of the area, and examined vertical variations and their correlations. The results showed correlations between some mineral constituents and geotechnical properties of clay sediments. A positive correlation showed between quartz content and wet unit weight, whereas a negative correlation showed between quartz content and liquid limit. Feldspar content and water content showed a negative correlation, whereas content of clay minerals and liquid limit showed a positive correlation. And also, there is a negative correlation between content of clay minerals and wet unit weight. Correlation equations are obtained from the multiple regression analyses among plastic index, content of clay mineral, smectite and clay fraction.

• The Korean Journal of Food And Nutrition
• /
• v.35 no.5
• /
• pp.353-358
• /
• 2022

To confirm the applicability of crab apple, the composition and content of amino acids and minerals with 'Fuji' apple were measured. Apple and crab apple were extracted with water, 70% and 100% ethanol, respectively. The contents of polyphenols, flavonoids, and ascorbic acid, antioxidant activities of these extracts were measured. The amino acid composition of apples comprised a total of 17 amino acids. The total amino acid contents of apple and crab apple were 2,050.45 mg/kg and 900.05 mg/kg, respectively. For minerals, the total mineral content of apple and crab apple were 489.14 mg%, 529.77 mg%, respectively. The contents of polyphenols, flavonoids, and ascorbic acid of apple and crab apple extracts were highest in 70% ethanol extracts. The content of polyphenols, the crab apple extract, showed a generally higher content than the apple extract. The content of flavonoids, apple and crab apple extracts revealed no difference between extracts. The content of ascorbic acid, apple extract showed a generally higher content than the crab apple extract, but there was no significant difference between extracts. In the case of DPPH and ABTS radical scavenging abilities, 70% ethanol extract showed the highest antioxidant activity, and crab apple showed higher activity than apple extracts.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.281-295
• /
• 2010

This paper deals with magnetic susceptibility, mineralogy, soil properties (pH, EC, CEC, loss on ignition), iron and manganese oxides, the content and partitioning of heavy metals (As, Cd, Cr, Cu, Ni, Pb, Zn), and their mutual relationship in the soil samples of an unpolluted, abandoned mine area, and industrial complex area. The various minerals derived from weathered bedrock were identified by X-ray diffraction in the unpolluted soil samples, except for the magnetic minerals. XRD analysis also revealed the existence of hematite and magnetite related to mine tailings and waste rocks in the abandoned mine area samples. The industrial complex area samples had carbonate minerals, such as calcite and dolomite, that might be due to anthropogenic deposition. The sum of the reducible, oxidizable, and residual fractions was over 80% for the abandoned mine area samples and over 50% for the industrial complex area samples using the sequential extraction method. The industrial complex area samples had a relatively high carbonate fraction that was associated with carbonate minerals. The content of aqua regia-extractable Fe, Mn, As, and Zn had a high positive correlation with the content of the dithionite-citrate-bicarbonate (DCB)-extractable method related to Fe/Mn oxide phases. The 54% and 58% of aqua regia-extractable Fe and As content, respectively, acted together with the concentrations of the DCB-extractable phases. Magnetic susceptibility values of total samples ranged from 0.005 to $2.131{\times}10^{-6}m^3kg^{-1}$. The samples including iron oxide minerals, such as hematite and magnetite, had a high magnetic susceptibility. The magnetic susceptibility showed a significant correlation with the heavy metals, Cd (r=0.544, p<0.05), Cr (r=0.714, p<0.01), Ni (r=0.645, p<0.05), Pb (r=0.703, p<0.01), and Zn (r=0.496, p<0.01), as well as Fe (r=0.608, p<0.01) and Mn (r=0.615, p<0.01). The aqua regia-extractable Fe and Mn content had a significant positive correlation with Cd, Cr, Cu, Ni, and Zn. However, the DCB-extractable Fe and Mn content had a significant positive correlation with As and Ni, indicating that the heavy metals were associated with Fe and Mn oxide minerals.

• Fisheries and Aquatic Sciences
• /
• v.6 no.4
• /
• pp.172-179
• /
• 2003

The safety of pufferfish (Lagocephalus gloveri) liver oil and the contents of some nutritional components were examined to obtain important information on their use as high valued functional foods. Pufferfish liver oil was extracted by the hot-water method using $1\%$ NaOH solution to remove toxic compounds, and then purified using a general purifying method of fish oil. Any extraordinary clinical symptoms were not observed from all groups administrated with pufferfish liver oil throughout the test period. None of the rats died when administrated the highest concentration of 10 mL/kg of the pufferfish liver oil. Vitamin A content was 114.2 ppm, as a retinal equivalent in the oil extracted using hot-water, but the content was higher (169.3 ppm) in oil extracted using n-hexane. Vitamin D and E were not detected in ppm in oil extracted using hot-water. Vitamin D in the pufferfish liver oil extracted using n-hexane was also undetected, but vitamin E was at 32.5 ppm. Among the 18 minerals detected, the sodium content was the highest at 253.5 ppm, followed by 13.9 ppm ofpotassium, 1.5 ppm of calcium, 0.2 ppm of magnesium, and other trace minerals. The contents of EPA and DHA were $0.8\%\;and\;14.8\%$, respectively, in the pufferfish liver oil extracted using hot-water. Considering these results, there is potential that pufferfish liver oil could be used as a functional food.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1523-1526
• /
• 2001

To study the secretion of trace elements during early lactation, twelve lactating Murrah buffaloes were selected from the herd of the institute. The buffaloes were divided into two groups of six each. Buffaloes of group I were not injected and served as control. Buffaloes of group II received oxytocin injection (2.5 I.U.) intramuscularly for a period of five days for let down of milk. Milk samples were collected from both groups of buffaloes five days before, during and after the administration of oxytocin. Aliquots of milk samples from each buffalo were composited in proportion to their milk yield and used for analysis of trace elements in milk. In both the groups of buffaloes Cu, Mg, Fe, Zn and Mn contents did not vary significantly between animals. However, Ca levels varied significantly (p<0.01) between animals. Administration of oxytocin influenced (p<0.01) Cu, Mg, Zn, Fe and Mn secretion in milk. However, Ca secretion was not affected by oxytocin administration. Secretion of these elements also varied significantly during different days of the study. Zinc content of milk in the control group also varied significantly (p<0.01) during different days and periods of study indicating thereby no effect of oxytocin. The study indicated that administration of oxytocin increases Cu and Mn content and decreases Mg, Fe and Zn content without altering the Ca concentration of milk.

• Geomechanics and Engineering
• /
• v.14 no.4
• /
• pp.399-406
• /
• 2018

The influences of mineral content and porosity on ultrasonic wave velocity were assessed for ten hornfelsic rocks collected from southern and western parts of the city of Hamedan, western Iran. Selected rock samples were subjected to mineralogical, physical, and index laboratory tests. The tested rocks contain quartz, feldspar, biotite, muscovite, garnet, sillimanite, kyanite, staurolite, graphite and other fine grained cryptocrystalline matrix materials. The values of dry unit weight of the rocks were high, but the values of porosity and water absorption were low. In the rocks, the values of dry unit weight are related to the presence of dense minerals such as garnet so not affected by porosity. The statistical relationships between mineral content, porosity and ultrasonic wave velocity indicated that the porosity is the most important factor influencing ultrasonic wave velocity of the studied rocks. The values of P-wave velocity of the rocks range from moderate to very high. Empirical equations, relevant to different parameters of the rocks, were proposed to determine the rocks' essential characteristics such as primary and secondary wave velocities. Quality indexes (IQ) of the studied samples were determined based on P-wave velocities of them and their composing minerals and the samples were classified as non-fissured to moderately fissured rocks. Also, all tested samples are classified as slightly fissured rocks according to the ratio of S-wave to P-wave velocities.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.6
• /
• pp.826-835
• /
• 2012

This study was conducted to examine the quality characteristics of Oncorhynchus masou stock containing various amounts of tomato (2%, 4%, 6%, 8% and 10%). To accomplish this, the moisture contents, Hunter's color value, pH, salinity, sugar contents, free sugar contents, minerals and free amino acid were measured. The b value decreased, while the L value, a value, pH, salinity, sugar contents, total sugar (fructose, glucose, sucrose) and minerals (Na, Mg, K, Ca, Fe) increased as the ratio of tomato increased. A total of 33 free amino acids were detected, and the amino acid content increased as the ratio of tomato increased. Investigation of different attributes revealed that tomato content significantly affected color intensity, savory flavor and tomato taste. In the acceptance test, stock containg 8% tomato was preferred for flavor, taste, texture and overall quality ; therefore, this was taken as the optimal tomato content for maximizing the overall quality of Oncorhynchus masou stock.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.1-13
• /
• 1994

The industrial minerals play an important role in mining sector. More than 70 % of total mineral production come from industrial mineral sector. This paper reviews geological occurrence of kaolin, pyrophyllite and limestone, and current demand-supply status of major industrial minerals in the Republic of Korea. The kaolin is mainly distributed in the Kyeongsang province, formed by deep weathering of Precambrian anorthosite on mountainside of gentle slope. The pyrophyllite mainly occurs in the Kyeongsang and Chulla provinces, formed by hydrothermal alteration of late Cretaceous andesitic and rhyolitic rocks. Pyrophyllite comprises massive and lenticular bodies and contains minor amounts of kaolin, alunite and pyrite, in some places andalusite and illite. The limestone(Great Limestone Series of Cambrian age) is distributed widely in the Kwangwon and Chungcheong provinces. The limestone bodies are approzimately 70 km long and 3 km wide, elongated NE-ward, and show high grade of CaO content. In 1992, the self-sufficiency ratio of 44 nonfuel (metallic and non-metallic) minerals was no more than 30 percent. However, the ratio of 27 industrial minerals (non-metallic) represents high value of about 72 percent. The export/productjon ratio of the industrial minerals shows decreasing patterns from 12.2 % in 1983 to 4.2 % in 1992. Also the import/production ratio shows rapidly decreasing pattern from 84 % in 1983 to 38.2 % in 1992.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.289-302
• /
• 2007

Separation process of heavy minerals was performed with sand from Dunjang beach of Jaeundo, Shinangun, Chonnam, and the feasibility study separating heavy minerals was carried out, and their properties were studied. Samples were selected in three parts, which were upper part, middle part and lower part, with depth. Samples of heavy mineral groups separated with the spiral separator were chosen as starting materials, and they were separated with 3 times of table separation. Heavy minerals presenting in this area were ilmenite, zircon, rutile, anatase, monazite, and xenotime. In the results of 3 times of table separation, minor content of quartz, orthoclase, albite and muscovite were existed as gangue minerals. Accordingly, we concluded that additional specific gravity separation was needed. In the results of separation of heavy minerals by hand picking, it was confirmed that heavy minerals had various genesis because of their various roundness and color.