• The Journal of the Petrological Society of Korea
• /
• v.18 no.2
• /
• pp.153-169
• /
• 2009

Hornblende gabbro-lamprophyre-diorite Complex in Guwoonri, Hwacheon distributes in a zonal pattern, where the diorite distributed along the margin of the Complex encompasses the hornblende gabbro body in the central part of the Complex, and lamprophyre intruded in vein along the boundary between diorite and hornblende gabbro. The hornblende gabbro in the central part of the Complex also shows a zonal distribution pattern, where hornblende gabbro containing subspherical amphibole phenocrysts as a major mafic mineral(Sag) surrounds hornblende gabbro with prismatic amphiboles as a principal mafic mineral(Pag). The zonal distributions observed in hornblende gabbro-lamprophyre-diorite Complex in Guwoonri resulted from two different geological processes. The zonal distribution among diorite, lamprophyre, and hornblende gabbro was due to intrusions of three distinct magmas derived from different degree of partial melting of a common source rock, whereas the zonal distribution shown within the hornblende gabbro body occupying the central part of the Complex resulted from an inward fractional crystallization of a single magma. Geochemical characteristics and mineral mode of hornblende gabbro, lamprophyre, and diorite indicate that these rocks formed from hydrous mafic to intermediate magma derived from partial melting of enriched mantle, which has been caused by infiltration of volatiles including water into mantle in plate margin.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.513-525
• /
• 2009

The Buyeong gold-silver deposit consists of quartz veins that fill along the NS fault zone within Cretaceous Goseong formation. Mineralization can be divided into hypogene and supergene stages. Hypogene stage is associated with hydrothermal alteration minerals such as sericite, pyrite, chlorite, epidote and sulfides such as pyrite, pyrrhotite, marcasite, sphalerite, chalcopyrite, galena and galenobismutite. Supergene stage is composed of malachite, goethite, chalcocite, and sphalerite oxide. Fluid inclusion data indicate that homogenization temperatures and salinities range from 112 to $340^{\circ}C$ and from 0.2 to 7.9 wt.% NaCl, respectively. Sulfur(3.2~3.9‰) isotope composition indicates that ore sulfur was derived from mainly magmatic source as well as partly host rocks. The calculated oxygen(4.3~6.0‰) and hydrogen(-60~-64‰) isotope compositions indicate that hydrothermal fluids may be meteoric origin with some degree of mixing of another meteoric water for paragenetic time.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.407-421
• /
• 2014

The benthic environmental impact experiment addresses environmental impacts at a specific site related to deep-sea mineral resource development. We have acquired several tens of multi- or box core samples at 31 sites within the Benthic environmental Impact Site (BIS) since 2010, aiming to examine the basic properties of surficial deep-sea sediment as a potential source for deep-water plumes. In this study, we present the geochemical properties such as major elements, rare earth elements (REEs), and heavy metal contents at the BIS. Such proxies vary distinctly according to the Facies association. The lithology of all core sediments in the BIS corresponds to both Association Ib and Association IIIb. The vertical profiles of some major elements ($SiO_2$, $Fe_2O_3$, CaO, $P_2O_5$, MgO, MnO) show noticeable differences between Association Ib and IIIb, while others ($Al_2O_3$, $TiO_2$, $Na_2O$, and $K_2O$) do not vary between Association Ib and IIIb. REEs are also distinctly different for Associations Ib and IIIb; in Association Ib, REY and HREE/LREE are uniform through the sediment section, while they increase downward in Association IIIb like the major elements; below a depth of 8 cm, REY is over 500 ppm. The metal enrichment factor (EF) evaluates the anthropogenic influences of some metals (Cu, Ni, Pb, Zn, and Cd) in marine sediments. In both Associations, the EF for Cu is over 1.5, the EF for Ni and Pb ranges from 0.5 to 1.5, and the EF for Zn and Cd are less than 0.5, indicating Cu is enriched but Zn and Cd are relatively depleted in the BIS. The vertical variations of geochemical properties between Association Ib and IIIb are shown to be clearly different, which seems to be related to the global climate changes such as the shift of Intertropical convergence zone (ITCZ).

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.164-175
• /
• 2011

Using natural electromagnetic (EM) fields at low frequencies, magnetotelluric (MT) surveys can investigate conductivity structures of the deep subsurface and thus are used to explore geothermal energy resources and investigate proper sites for not only geological $CO_2$ sequestration but also enhanced geothermal system (EGS). Moreover, marine MT data can be used for better interpretation of marine controlled-source EM data. In the interpretation of MT data, MT modeling schemes are important. This study improves a three dimensional (3D) MT modeling algorithm which uses edge finite elements. The algorithm computes magnetic fields by solving an integral form of Faraday's law of induction based on a finite difference (FD) strategy. However, the FD strategy limits the algorithm in computing vertical magnetic fields for a topographic model. The improved algorithm solves the differential form of Faraday's law of induction by making derivatives of electric fields, which are represented as a sum of basis functions multiplied by corresponding weightings. In numerical tests, vertical magnetic fields for topographic models using the improved algorithm overcome the limitation of the old algorithm. This study recomputes induction vectors and tippers for a 3D hill and valley model which were used for computation of the responses using the old algorithm.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1422-1427
• /
• 2002

Fifteen crossbred cattle bulls of about 22-24 months age (mean body weight ranged from 291.0 to 298.1 kg) were randomly divided into 3 groups of 5 animals following randomized block design. Animals in group 1 were fed concentrate mixture containing wheat bran 97%, mineral mixture 2% and salt 1% plus ad libitum chopped green sugarcane tops (SCT) as a roughage source. Animals in group 2 were fed concentrate mixture containing lentil chuni 97%, mineral mixture 2% and salt 1% while group 3 concentrate contained wheat bran 48.5%, lentil chuni 48.5%, mineral mixture 2% and salt 1% plus ad libitum chopped green SCT to meet their maintenance requirements. During metabolism trial period, the mean total intake and digestibility of DM in groups 1, 2 and 3 was $8.09{\pm}0.41$, $8.41{\pm}0.49$ and $7.86{\pm}0.16kg/d$ and 60.24, 63.24 and 65.05%, respectively. The intake of CP (p<0.05) and EE (p<0.01) was significantly higher in group 2 and group 1, respectively as compared to remaining 2 groups, which were comparable. Digestibility of CP and EE was significantly (p<0.01) higher in group 3 and that of CP was comparable with group 2. The intake and digestibility of total carbohydrates, NDF, ADF, Hemi-cellulose and cellulose were similar among 3 groups. The mean body weight changes in group 1, 2 and 3 were 173.4, 253.4 and 203.4 g/d, respectively, which was significantly (p<0.05) higher in group 2. The total nitrogen (N) and phosphorus (P) intakes were significantly higher in group 2 and group 1, respectively. The total volatile fatty acids, ammonia-N, trichloro-acetic acid precipitable nitrogen (TCA ppt.-N; p<0.05), total-N concentrations and pH were significantly (p<0.01) higher in group 3, however, pH and TCA ppt.-N was comparable with group 2 and 1, respectively. From the results, it may be deduced that the feeding of chopped green SCT supplemented with a concentrate mixture having both wheat bran (48.5%) and lentil chuni (48.5%) has shown a better performance with respect to intake and digestibility of nutrients and growth as well.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.05a
• /
• pp.57-65
• /
• 2009

Selection of good mineralized area is a combination of the integration of all the available geo-scientific (i.e., geological, geochemical, and geophysical) information, extrapolation of likely features from known mineralized terrenes and the ability to be predictive. The time-space relationships of the hydrothermal deposits in the East Asia are closely related to the changing plate motions. Also, two distinctive hydrothermal systems during Mesozoic occurred in Korea: the Jurassic/Early Cretaceous deep-level ones during the Daebo orogeny and the Late Cretaceous/Tertiary shallow geothermal ones during the Bulguksa event. Both the Mesozoic geothermal system and the mineralization document a close spatial and temporal relationship with syn- to post-tectonic magmatism. The Jurassic mineral deposits were formed at the relatively high temperature and deep-crustal level from the mineralizing fluids characterized by the relatively homogeneous and similar ranges of ${\delta}^{18}O$ values, suggesting that ore-forming fluids were principally derived from spatially associated Jurassic granitoid and related pegmatite. Most of the Jurassic auriferous deposits (ca. 165-145 Ma) show fluid characteristics typical of an orogenic-type gold deposits, and were probably generated in a compressional to transpressional regime caused by an orthogonal to oblique convergence of the Izanagi Plate into the East Asian continental margin. On the other hand, Late Cretaceous ferroalloy, base-metal and precious-metal deposits in the Taebaeksan, Okcheon and Gyeongsang basins occurred as vein, replacement, breccia-pipe, porphyry-style and skarn deposits. Diverse mineralization styles represent a spatial and temporal distinction between the proximal environment of sub-volcanic activity and the distal to transitional condition derived from volcanic environments. However, Cu (-Au) or Fe-Mo-W deposits are proximal to a magmatic source, whereas polymetallic or precious-metal deposits are more distal to transitional. Strike-slip faults and caldera-related fractures together with sub-volcanic activity are associated with major faults reactivated by a northward (oblique) to northwestward (orthogonal) convergence, and have played an important role in the formation of the Cretaceous Au-Ag lode deposits (ca. 110-45 Ma) under a continental arc setting. The temporal and spatial distinctions between the two typical Mesozoic deposit styles in Korea reflect a different thermal episodes (i.e., late orogenic and post-orogenic) and ore-forming fluids related to different depths of emplacement of magma (i.e., plutonic and sub-volcanic) due to regional changes in tectonic settings.

• Journal of Korea Soil Environment Society
• /
• v.2 no.3
• /
• pp.49-57
• /
• 1997

Naturally-occurring iron minerals, goethite and magnetite, were used to catalyze hydrogen peroxide and initiate Fenton-like oxidation of silica sand contaminated with diesel, kerosene in batch systems. Reaction conditions were investigated by varying H$_2$0$_2$concentration(0%, 1%, 15%), initial contaminant concentration(0.2, 0.5, 1.0g diesel and kerosene/kg soil), and iron minerals(1, 5wt% magnetite or goethite). Contaminant degradations in silica sand-iron mineral-$H_2O$$_2$ systems were identified by determining total petroleum hydrocarbon(TPH) concentration. In case of silica sand contaminated with diesel(1g contaminan/kg soil with 5wt% magnetite) addition of 0%, 1%, 15% of $H_2O$$_2$showed 0%, 25%, and 60% of TPH reduction in 8 days, respectively When the mineral contents were varied from 1 to 5wt%, removal of contaminants increased by 16% for magnetite and 13.1% for goethite. The results from system contaminated by kerosene were similar to those of the diesel. Reaction of magnetite system was more aggressive than that of goethite system due to dissolution of iron and presence of iron(II) and iron(III); however, dissolved iron precipitated on the surface of iron mineral and seemed to cause reducing electron transfer activity on the surface and quenching $H_2$$O_2$. The system used goethite has better treatment efficiency due to less $H_2$$O_2$ consumption. Results of this study showed possible application of catalyzed $H_2$$O_2$ system to petroleum contaminated site without addition of iron source since natural soils generally contain iron minerals such as magnetite and goethite.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.253-272
• /
• 2015

The necessity of aggregate resources in Korea has been increased with a rapid economic growth since the 1990s. Construction activities have been increased drastically for last two decades. Such economic activities are much concentrated at big cities in Korea, and recently new neighbouring cities, such as multifunctional administrative city, enterprise city and innocity, are under construction at the surroundings of the cities. This new urbanization asked for an appropriate supply of raw construction materials such as cement, sands and gravels. The aim of this study is to understand and discuss the analysis and prospect of supply and demand of domestic sand and gravel. On the early years, 1990s, about 25% of the total consumption of these sands and gravels comes from riverine deposits; 20% to 25% from marine sands, 40% to 45% from forest rocks and the rest 5% to 15% from old fluvial deposits and crushed rocks. But nowaday the river aggregate, including both sands and gravels of a present river channel and those of the old fluviatile system are decreasing, while the crushed and forest aggregates and marine sand are now the main source of infrastructure resources. Thus it is increasingly necessary to investigate the forest and crushed aggregate resources potential in Korea where a current analysis indicate that the supply of riverine aggregates gradually decreases.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.11-19
• /
• 2017

Reddish brown clay-silt sediments covered granitoid weathering crust in the Jangdongri area, Naju, Korea. Mineralogical and geochemical properties of the ~2 m sediment section were investigated. The sediments were composed mainly of quartz (50%) and clay minerals (45%) with minor contents of K-feldspar, goethite, hematite, and gibbsite. The clay minerals were illite, illite-smectite mixed-layers, vermiculite, hydroxy-Al vermiculite, kaolinite, and halloysite. Mineral composition varied little through the section with the minor upward enrichment of plagioclase and chlorite. Abundant illitic clay minerals indicated the remote source of the sediments because clays derived by granite weathering in Korea were dominated by kaolin minerals. A comparison with the mineral composition of Asian dust (Hwangsa) suggested that plagioclase and K-feldspar disappeared by chemical weathering after deposition, resulting in the quartz and clay-rich sediments. Plagioclase and chlorite altered to kaolin and vermiculite, respectively. Goethite and hematite derived by the weathering of iron-bearing minerals stained the sediment to reddish brown color. The mineralogical and geochemical properties of the reddish brown clay-silt sediments were consistent with those of eolian deposits identified in Korea, supporting eolian origin of the Jangdongri sediments, requiring future confirmation including age dating and isotopic analysis.

• The Korean Journal of Quaternary Research
• /
• v.18 no.1 s.22
• /
• pp.1-20
• /
• 2004

A geoscientific research was performed on 12 samples of comb-pattern potteries which were excavated at Daecheonri neolithic site, Korea. The texture and compositions of 12 potteries and surrounding metrix of soil and rocks were compared with the help of petrographic microscope, XRD and REE data. As to the manufacturing techniques thick potteries are caused by the amount and number of coarse grains which are assumed to be added shards when their distributional pattern are considered. DC1, DC3, DC 7 and DC11 samples have clearly oriented textures, and the orientation of vesicles in DC3 and DC11 samples arranged in the same direction with those on the pottery surface. This indicates the use potter's wheel technique in manufacturing potteries. Burning temperature is assumed over $800^{/circ}C$, particularly under reduction environment. As to the source, raw materials of pottery matrix are derived from the bottom of excavation site, or in an extracted outcrop of the northwestern foothill from site, while the shard materials are very similar with those extracted from sandy loams near sites. Finally any use pattern of pottery may control the pottery thickness, shard addition, and matrix selection.