• Journal of Energy Engineering
• /
• v.27 no.1
• /
• pp.40-50
• /
• 2018

Today, the development of industries and rapid urbanization has a profound impact on the human environment. It can be said that the environment in the craft village is most affected. The environment in these areas is severely degraded and depending on the type of production, the environment in the craft villages is different. In Phong Khe ward of Bac Ninh Province, Vietnam, there are over 204 small and large facilities of recycling and producing paper. The paper facilities produce about 200,000 tons of paper each year and the amount of paper produced is not less than 500 tons each day in Phong Khe. They are creating livelihoods for more than 6,000 workers and generating local budgets from VND- 50 billion to VND 60 billion per year. Despite this great contribution, the use of old machines and "backward" modes of production means that paper recycling has caused serious air, soil, and water pollution in the region. The specific objectives of this study were as follows: (1) provide an overview of paper production process in the Phong Khe paper craft village; (2) comprehensive literature review of the current status of water environment, atmosphere environment, soil environment and solid waste; (3) figure out about waste treatment in Phong Khe ward.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.46-57
• /
• 2011

In this study, analytical solution of multip-species transport equations coupled with a first-order reaction network under constant concentration boundary condition or total flux boundary condition is obtained using similarity transformation approach of Clement et al. (2000). The study shows the schematic process about how multi-species transport equations with first-order sequential reaction network is transformed through the similarity transformation approach into independent and uncoupled single species transport equations with first-order reaction. The analytical solution was verified through the comparison with popular commercial programs such as 2DFATMIC and RT3D. The analytical solution can be utilized in nuclear waste sites where radioactive contaminants and their daughter products occur and in industrial complex cities where chlorinated solvent such as PCE, TCE, and its biodegradation products produces. In addition, it can help the verification of the developed numerical code.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.22-30
• /
• 2015

For the preliminary investigations of the bioclogging on groundwater artificial recharge system, studies for conditions and analytical methods of biofilm formation on sediments were performed. Based on the tested results, following conditions were determined for biofilm formation on batch process: optimum period for biofilm formation (30 days), the proper inoculating water (pond water), medium (minimum salt medium with 0.1% yeast extract). Procedures for the measurement of ATP and DHA were also determined. Biomass extract was used for ATP measurement, while sediment itself for DHA. Effects of metals on the biofilm formation were investigated under the determined conditions. Different sensitivities and orders were found depending on tested metals and measurement methods. In general, biomass measurement by ATP and viable cell count showed higher sensitivity than that of DHA. Following toxicity orders were also appeared for ATP and viable cell: Cu ≈ Cd > As(III).

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.251-268
• /
• 1986

Selecting a site for the safe disposal of radioactive waste requires the evaluation of a wide range of geologic, mineralogic, hydrologic, and physicochemical properties. Although highly diverse, these properties are in fact interrelated. Site requirements are also diverse because they are influenced by the nature of the radionuclides in the waste, for example, their half-lives, specific energy, and chemistry. A fundamental consideration in site selection is the mineralogy of the host rock, and one of the most ubiquitous mineral groups is clay minerals. Clays and clay minerals as in situ lithologic components and engineered barriers may playa significant role in retarding the migration of radionuclides. Their high sorptivity, longevity (stability), low permeability, and other physical factors should make them a very effective retainer of most radionuclides in nuclear wastes. There are, however, some unanswered questions. For example, how will their longevity and physicochemical properties be influenced by such factors as radionuclide concentration, radiation intensity, elevated temperatures, changes in redox condition, pH, and formation fluids for extended periods of time? Understanding of mechanisms affecting clay mineral-radionuclide interactions under prevailing geochemical conditions is important; however, the utilization of experimental geochemical information related to physicochemical properties of clays and clay-bearing materials with geohydrologic models presents a uniquely challenging problem in that many assessments have to be based on model predictions rather than on experiments. These are high-priority research investigations that need to be addressed before complete reliance for disposal area performance is made on clays and clay minerals.

• Journal of Soil and Groundwater Environment
• /
• v.24 no.3
• /
• pp.13-23
• /
• 2019

The purpose of this study is to suggest conceptual models based on finite numerical method that can be used to assess contaminant transport through subsurface and estimate exposed concentration at contaminated site. This study tested various assumptions of the numerical models for contaminant transport in unsaturated and saturated zones to simulate the pathways to the human exposal point. For this purpose, models for seven possible scenarios of contaminant transport were simulated using the numerical code MODFLOW and MT3D. The simulation results that showed different peak concentrations and travel times were compared. In conclusion, the potential utility of the numerical models in the site specific risk analysis suggested as well as future research ramifications.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.287-293
• /
• 2018

Amorphous silica ($SiO_2$) silt grains were found in some soils of Korean Peninsula. Scanning electron microscopy of polished section of soils revealed ellipsoidal amorphous $SiO_2$ grains with numerous submicron pores concentrated in the interior. Their amorphous structure was confirmed by lattice imaging and electron diffraction under transmission electron microscope. Amorphous $SiO_2$ grains were not found in the eolian sediment of the Chinese loess plateau. Although the origin of the amorphous $SiO_2$ grain is uncertain, they are likely either phytolith or weathering product of volcanic ash. The amorphous $SiO_2$ silt grains are not useful as a tracer of long-range transport mineral dust in soils.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.6
• /
• pp.37-45
• /
• 2018

The source of Chusan Spring water in the Ulleungdo is the precipitation in the Nari caldera basin, which permeates in the Trachitic pumice and tuff area and moves downward, outflowing at the lithologic boundary between the trachyte and Nari tuff. It is known that the discharge rate of the Chusan Spring is large enough to be used for the small hydroelectric power generation, but the exact discharge rate and hydrogeologic characteristics have not been known. The discharge rates of the Spring were measured 11 times, which ranged from $15,220m^3/d$ to $36,278m^3/d$. The discharge rates, measured by the automatic level recorder, for two-year period, were $20,000{\sim}38,000m^3/d$. The variation of discharge rates did not coincide with rainfall event, but showed daily increases of $3,000{\sim}5,000m^3/d$. The annual discharge rate excluding the evapotranspiration and the surrounding stream discharge corresponded to 70.6% of the annual precipitation of the recharge area. Therefore, meteorological observations at the Nari basin, rather than the Ulleung-do meteorological station, are more appropriate to properly interpret the discharge characteristics of the Chusam Spring and the recharge rate of the basin.

• The Journal of Engineering Geology
• /
• v.34 no.2
• /
• pp.295-315
• /
• 2024

Urban development and the expansion of electrical resistivity surveying applications have increased the need for soil and underground structure investigations on paved surfaces. Traditional methods involved drilling through the pavement or surveying surrounding soil. Recently, non-invasive surveying techniques have been developed. This paper analyzes these methods, categorizing them into galvanic methods (including drilling and flat ground electrodes) and capacitive coupling methods. By examining case studies, it suggests selecting the appropriate method based on the pros and cons of each and the specific site characteristics. The paper also discusses the applicability and limitations of electrical resistivity surveying through various examples.

• Asian Journal of Turfgrass Science
• /
• v.11 no.1
• /
• pp.1-7
• /
• 1997

This study was performed to find out the mineral cycles of manganese and zinc in dynamic grassland ecosystems in a steady state condition at the northwest side on Mt. Kwanak. The experimental results may be summarized on the communities of a Zoysia japonica and a Miscanthus sincnsis as follows. As compared with some properties of the surface soils among two semi-natural grasslands, manganese and zinc was greater quantity in a Miscanthus sincnsis than in a Zoysia japonica on Mt. Kwana For the case of steady procluction and release, the ratio of annual mineral production to the amount accumulated on the top of mineral soil in a steady state provides the estimates of release constant k. The release constants of Mn and Zn of the litter were 0.19 and 0. 14 in the Zoysia japon- ica grassland, and were 0.44 and 0.41 in a Miscanthus sincnsis grassland, respectively. The halftimes of Mn and Zn required for the release or accumulation of the litter on the grassland were 3. 65 and 4.95 years in the Zoysia japonica, and were 1.57 and 1.69 years in the Miscanthus sincnsis, respectively. The amounts of annual cycles for Mn and Zn in the grassland ecosystem under the steady-state conditions were 58.60 and 21.46 mg /$m^2$ in a Zoysia japonica, and were 372.12 and 321.49 ing /m$^2$ in a Miscanthus sincnsis grassland. Key words: Zoysia japonica. Miscanthus sincnsis, Mt. Kwanak, Manganese, Zinc, Mineral cycles.

• Journal of Plant Biology
• /
• v.35 no.2
• /
• pp.135-142
• /
• 1992

Shoot tip explants from germinated seeds of Alnus hirsuta were cultured on NT (Nagata and Takebe, 1971) mineral salts medium supplemented with 6% glucose, MS (Murashige and Skoog, 1962) vitamin mixture, polyvinylpyrrolidone (PVP) and $0-50\;\mu\textrm{M}$ 6-benzylaminopurine (BAP). Five $\mu\textrm{M}$ BAP was found to give the highest shoot multiplication rate. Accordingly about 200 shoots were obtained for further experiments by multiplying shoots on this medium for 4-5 months. Regardless of carbon sources, NT mineral medium produced 3-12 times of shoots than MS mineral medium did. On NT mineral medium, 3% sucrose, 3% glucose and 6% glucose yielded no significant differences. It was observed that media consisting of 1/4-1/2 strength NT mineral salts, 3% sucrose and $1-8\;\mu\textrm{M}$ IBA produced about 100% rooting rate. Almost 100% of the resulting plantlets survived after transfer to the soil by decreasing humidity stepwise.epwise.