• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.1
• /
• pp.45-51
• /
• 2021

Purpose: Problems related to the elderly's daily life, such as social isolation and absence of a place to go, are already widely recognized, but there are few domestic studies or support policies for this, and the elderly leisure welfare facilities provided by the state do not fully support the elderly's daily life. There are studies related to the elderly's neighborhood environment and facilities, which can be seen as the third place for the elderly in Korea, but these are mostly quantitative studies. In order to talk about the third place for daily support for the elderly in Korea, a detailed study of the use cases of the third place in Korea is needed. This study analyzes the third place of the elderly in Korea and discovers the characteristics and components. Based on the detailed analysis of the third place of the elderly, the characteristics of the third place of the elderly in Korea and the elements constituting it are found to be able to represent the specific necessary environment of the third place of the elderly. Methods: The research targets include 'A Mill' (located in Jungnang-gu, Seoul), and 'Roadside in front of Villa B'(located in Dongdaemun-gu, Seoul), 'C-dong roadside park'(located in Dobong-gu, Seoul) within the range of repeated observations and meetings among the places used as a third place for the elderly was selected. The site survey consisted of in-depth interviews, observational surveys, and participatory observations. In-depth interviews were held for a total of 5 months, from October to December 2019 and from April to May 2020. Results: As a result, a total of 11 characteristics (adjacent to the residence, an open place, an independent space, a comfortable place to stay, a pleasant space, safety is guaranteed, a place that has been operated for a long time, a place that can be used autonomously, a place where social exchange occurs, No financial burden, fun activities) was discovered. Implications: This study is significant in that unlike the existing studies focusing on the use behavior of established institutions or facilities, the elderly identified the necessary environment through their own created places.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.185-194
• /
• 2022

Coffee is one of the most consumed beverages in the world and is the second largest traded commodity after petroleum. Due to the great demand of this product, large amounts of waste is generated in the coffee industry, which are toxic and represent serious environmental problems. This study aims to study the possibility of recycling spent coffee grounds (SCG) as a mineral admixture by replacing the cement in the manufacturing of concrete. To recycle the coffee g rounds, the SCG was dried to remove moisture and fired in a kiln at 850 ℃ for 8 hours. Carbonized coffee grounds are produced as coffee grounds ash (CGA) through ball mill grinding. The chemical composition of the prepared coffee grounds ash was investigated using X-ray fluorescence (XFR). According to the chemical composition analysis, the major elements of coffee grounds ash are K₂O(51.74 %), CaO(15.92 %), P₂O₅(14.39 %), MgO(7.74 %) and SO₃(6.89 %), with small amounts of F₂O₃(0.66 %), SiO₂(0.59 %) and Al₂O₃(0.31 %) content. To evaluate quality and mechanical properties, substitutions of 5, 10, and 15 wt.% of coffee grounds ash (CGA) were tested. From the quality test results, the 28-day activity index of CGA5 reached 80 %, and the flow value ratio reached 96 %, which is comparable to the minimum requirement for second-grade FA. From the test results of the mortar, the optimal results have been found in specimens with 5 wt-% coffee grounds ash, showing good mechanical and physical properties.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.35 no.4
• /
• pp.63-74
• /
• 2022

Objectives : Skin aging is generally characterized by wrinkles, sagging, loss of elasticity roughness, pigmentation and dryness. This changes is caused by reducing the elements constituting the extracellular matrix contributing to the physiological properties of the skin, such as collagen fiber, elastic fiber, and hyaluronic acid. Adequate skin hydration is important to maintain normal skin function and reduce skin aging. The present study is objective to observe skin moisturizing effects of Unripe apple(UA, Immature fruit of Malus pumila Mill) in vivo and its underlying molecular mechanisms. Methods : ICR mice were orally administerd UA(100, 200 and 400mg/kg/day) for 8 weeks, and skin water contents and the expression of transforming growth factor (TGF)-𝛽1, ceramide, hyaluronan and collagen type I(COL1) were measured in dorsal back skin of the mice. Gene expression of hyaluronan synthase(HAS1, HAS2, HAS3), collagen synthase(COL1A1, COL1A2) and TGF-𝛽1 were also determined by realtime RT-PCR. Results : Skin water contents and the expression of TGF-𝛽1, ceramide, COL1 and hyaluronan were significantly increased in UA group(100, 200 and 400mg/kg/day) compared to vehicle control. The mRNA expression of HAS isoform(HAS1, HAS2, HAS3), COL1A1, COL1A2, and TGF-𝛽1 were also significantly increased by UA. Conclusions : UA has skin moisturizing effects and enhancement activities in skin function related components(COL1, hyaluronan, ceramide and TGF-𝛽1). These results suggested that UA can be a developing candidate for developing alternative skin protective agent or functional food ingredient.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.56-62
• /
• 2022

This study investigated the water leaching behavior of vanadium in Na₂CO₃-roasted vanadium-bearing titaniferous magnetite (VTM) concentrate. The magnetic concentrate and Na₂CO₃, mixed in a mass ratio of 4:1, were roasted at 1050 ℃, kept for 3 h, and ground to a size of D₅₀ = 48.79 ㎛ using a rod mill. The effects of leaching temperature and pulp density on water leaching were then investigated. The results show that the vanadium leaching efficiency decreased to 90.4%, 88.2%, and 83.8% as the temperature increased to 25, 55, and 85 ℃, respectively, whereas it remained almost constant 90.4%, 87.0%, and 87.0% as the pulp density increased to 10, 50, and 100 w/v%, respectively. Based on the preliminary leaching results, multi-stage leaching was conducted with the experimental conditions of 25 ℃, 100 w/v%, 300 rpm, and 1 h. The vanadium concentration in the final leaching solution was determined as 16.20 g/L after four stages of leaching. Thus, a high-concentration sodium vanadate solution was prepared by multi-stage leaching.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.8 no.1
• /
• pp.30-42
• /
• 2006

This experiment was conducted to investigate current situation and plant grouping by light and watering of mingled several cacti and succulents in a pot. The main 11 cacti are consist of Myrtillocactus geometrizans (Mart.) Cons., Gymnocalycium mihanovichii var. friedrichii Werd., Marginatocereus marginatus(DC.) Backbg., Eriocactus leninghausii (Hge. Jr.) Backbg, Notocactus scopa (Spreng.) Berg., Lobivia nealeana Backbg., Mammillaria elongata var. intertexta (DC.) SD., Pseudoespostoa (Vp1.) Backbg., Mammillaria albilanata Backbg., Mammillaria klissingiana Bod. and Espostoa lanata (HBK.) Br. & R. The main 10 succulents are Kalanchoe thyrsifolia Harv., Portulacaria afra var. foliis-variegatis Jacobs., Crassula perforata Thunbg., Echeveria pulvinata Rose, Aeonium arboreum cv. atropurpureum., Echeveria lauii Moran & J. Meyran, Pachypodium lamerei Drake, Sedum rubrotinctum cv. Aurora Boom., Aloe mitriformis Mill., and Euphorbia coerulescens Haw. The cacti were native to Mexico, Brazil, Peru, Paraguay, Ecuador, etc. The sucullents were native to Mexico, Africa, Gran Canaria, Madagascar, etc. Most of all the cacti and sucullents in the experiment are growing well under full sun or light shade, however Portulacaria afra var. foliis-variegatis Jacobs, and Sedum rubrotinctum cv. Aurora Boom. did not influenced by light. And all the plants require a little or moderate watering. Thus, planting by similar required water and light, when growing in a pot of several cacti and succulents, might be decreased the rate of death causing by their different plant physiology.

• Clean Technology
• /
• v.16 no.4
• /
• pp.258-264
• /
• 2010

This study estimated the possibility of phosphate removal characteristics to utilize EAF(electric arc furnace) slag as submarine cover material. The major phosphate removal mechanism was a certain formation of HAP precipitation occurred by the ionization reaction between $Ca^{2+}$ and $OH^-$, which were leached from the EAF Slag. Another phosphate removal mechanism was the adsortion of EAF slag surface. As a result of $PO_4{^-}-P$ removal characteristics using continuous column reactor, $PO_4{^-}-P$ concentration decreased rapidly after 3 days and 10 days later, it show under 0.5 ppm. The result as applied in real sea water, shows that the phosphate removal effects were 93~98% by the subaqueous sediment removal using the EAF slag. In conclusion, EAF slag is useful in $PO_4{^-}-P$ removal and control and it is possible to use without additional process like crush and selection.

• Resources Recycling
• /
• v.32 no.2
• /
• pp.3-11
• /
• 2023

The aim of this study was to develop a physical treatment method for obtaining iron concentrate with a grade higher than 60% from slag generated in the Waelz Kiln (WK) process. The size of the WK slag used in this work was several millimeters, with T-Fe and ZnO contents of 40.24% and 1.03%, respectively. The slag samples were pulverized in a laboratory rod mill for various grinding times, followed by a magnetic separation test under a low magnetic intensity of 0.05 T initially. The results showed that the highest iron grade was obtained from samples with a grinding time of 10 min. Additionally, for a grinding time of 20 min, the highest grade and recovery ratios were achieved at a magnetic intensity of 0.8 T. Based on these findings, the optimal physical treatment process proposed in this study resulted in iron concentrates with a grade of 61.34% and an enrichment ratio of 1.52.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5B
• /
• pp.519-524
• /
• 2010

This study was carried out to select suitable plants for beach revegetation as a preliminary study for quantifying the effect of decreasing sand movement. After planting some herbal plants in field, monitoring of temporal change of vegetation coverage which was index of the growth rate was conducted. Through literature reviews, 24 candidate plants for beach revegetation were selected, then seven species of them, Peucedanum japonicum Thunb., Dianthus japonicus Thunb. ex Murray, Sedum oryzifolium Makino, Sedum takesimense Nakai, Sedum spectabile Boreau, Farfugium japonicum (L.) Kitam., Aster sphathulifolius Maxim. were picked through salinity tolerance experiments in laboratory. Seven species selected by salinity tolerance experiments and two additional herbal plants, Prunella vulgaris var. lilacina Nakai and Linaria vulgaris Mill., not the candidates, were nine final species which were planted in the beach around Osan port, Uljin, Korea. The changes of vegetation coverage of each species were investigated from photos periodically taken for about a year using image processing methods. As a result of the monitoring, Sedum takesimensei, Dianthus japonicus and Aster sphathulifolius were observed with high coverages during the whole monitoring while Prunella vulgaris var. lilacina and Linaria vulgaris were observed with low coverage during the same period. Consequently, Sedum takesimensei, Dianthus japonicus and Aster sphathulifolius were concluded as the most suitable plants for beach revegetation. Furthur study to quantify the effects of decreasing sand movement by the selected species is needed.

• Journal of Korea Port Economic Association
• /
• v.39 no.2
• /
• pp.77-95
• /
• 2023

The regional infrastructure industries of Gwangyang City, the subject of this study, are Gwangyang Port and Gwangyang Steel Mill. Therefore, it is necessary to analyze the regional economic ripple effects of the port logistics industry in Gwangyang City. In this study, a multi-stage approach using the RW and the LQ methodology using the national input-output tables in 2015 and 2019 is used to prepare the regional interindustry analysis chart in Gwangyang City, and an exogenous demand induction model that reclassified the port logistics industry was applied. Through this, the purpose of this study was to provide policy implications by figuring out the regional economic ripple effects of the port logistics industry quantitatively in Gwangyang City. As a result of the analysis, the industries with high production inducement effect and forward/backward linkage effect of the port logistics industry in Gwangyang City were analyzed as manufacturing, transportation, land and air logistics sectors. And the industries in which the added value inducement effect and the employment inducement effect were analyzed as an industry related to the service industry. Therefore, it is necessary to prepare support measures to foster the port logistics industry as a way to promote these industries and revitalize the local economy of Gwangyang City. To this end, it is desirable to improve policies and systems for the vitalization of the Gwangyang port maritime cluster and provide various policy support for the port logistics industry in Gwangyang City. This study is meaningful in suggesting policy implications for the regional economy of Gwangyang City based on the results of exogenous analysis of the port logistics industry in small and medium-sized cities. However, It seems that further studies related to this will be needed in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.6-19
• /
• 2024

With the advancement of Computer-Aided Design/Computer-Aided Manufacturing (CAD-CAM) technology, fabrication of dentures using this technology has gained popularity. As one of CAD-CAM technologies, digital complete denture system has been introduced, which fabricates complete dentures using subtractive manufacturing of monolithic block containing both the color of a denture base and an artificial tooth. In this case, two pairs of upper and lower dentures were fabricated for two patients. Two pairs of complete dentures were fabricated for a 74-year-old male and a 73-year-old female respectively by conventional denture fabrication method and digital method of milling. To obtain a digital complete denture, monolithic block (Ivotion, Ivoclar Vivadent, Schaan, Liechtenstein) was chosen for the materials to fabricate the digital complete dentures. An individual tray was designed using CAD software and manufactured by 3D printing technique. The final impression and interocclusal relationship were recorded using the fabricated individual tray. The final impression was scanned, and the complete denture design and try-in denture were 3D printed using CAD-CAM software. Subsequently, the monolithic block was milled, and the final dentures were fabricated and tried on patients. Previously mentioned two patient cases compared and analyzed stability, fit, speaking, mastication, aesthetics, and patient satisfaction of two pairs of dentures: one fabricated using CAD-CAM system and the other using traditional methods. This was performed to evaluate and report the findings from both denture-making approaches.