• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.181-185
• /
• 2009

Recently, much attention to a self-organizing mobile ad-hoc network is escalating along with progressive deployment of wireless networks in our everyday life. Being readily deployable, the MANET (mobile ad hoc network) can find its applications to emergency medical service, customized calling service, group-based communications, and military purposes. In this paper we investigate a time slot exchange problem found in the time slot based MAC, that is designed for IEEE 802.11b interfaces composing a MANET. The paper provides a method to maintain the quality of voice call by providing a new time slot when the channel assigned for that time slot gets noisy with interferences induced from other nodes, which belong to the same and/or other subgroups. In order to assess the performance of the proposed algorithm, a set of simulations using the OPNET modeler has been performed assuming that the IEEE 802.11b interfaces are operating under a modified MAC, which is a time slot based reservation MAC implemented in the PCF part of the superframe. In a real-time voice call service over a MANET of a size 500 ${\times}$ 500 meter squares with the number of nodes up to 100, the simulation results are collected and analyzed with respect to the packet loss rate and packet delay. The results show us that the proposed time slot exchange protocol improves the quality of voice call over that of plain DCF.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.5
• /
• pp.45-55
• /
• 2002

In this paper, we describe an outdoor augmented reality system using GPS tracking for position and attitude information. The system consist of a remote mobile operation unit and a ground operation unit. The remote mobile operation unit includes a real-time image acquiring device, a GPS tracking device, and a wireless data transceiver; the ground operation unit includes a wireless transceiver, a virtual image generating device, and an image superimposing device. The GPS tracking device for measurement of position and attitude of the remote mobile operation unit was designed by TANS Vector and RT-20 for DGPS. The wireless data transceiver was for data transmission between the remote mobile operation unit and the ground operation unit. After the remote mobile operation unit was installed on a vehicle and a helicopter, the system was evaluated to verify its validity in actual applications. It was found that the implemented system could be used for obtaining real-time remote information such as construction simulation, tour guide, broadcasting, disaster observation, or military purpose.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.73-80
• /
• 2009

Security is critically important for ubiquitous sensor networks that are usually used for the military and serveillance in environments that are opened to attacks, such as, eavesdroping, replay attacks of abnormal messages, forgery of the messages to name a few. ZigBee has emerged as a strong contender for ubiquitous sensor networks. ZigBee is used for low data rate and low power wireless sensor network applications. To deploy ubiquitous sensor networks, the collected information requires protection from an adversary over the network in many cases. The security mechanism should be provided for collecting the information over the network. However, the ZigBee protocol has some security weaknesses. In this paper, these weaknesses are discussed and a method to improve security aspect of the ZigBee protocol is presented along with a comparison of the message complexity of the proposed security protocol with that of the current ZigBee protocol.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1112-1115
• /
• 2016

Global Positioning System(GPS) is a useful system used in both civilian and military applications. However, the signal of GPS is susceptible to jamming attacks due to low receive sensitivity, since the signals come from the satellite located at over 20,000 km above the earth. In this paper, we have conducted a preceding research on a non-Foster matching circuit that efficiently matches an electrically ultra-small GPS antenna. Electrically Small Antennas(ESAs) are inefficient radiators and are difficult to match in wideband due to extremely high quality factor. In order to match small GPS antenna in wideband, a non-Foster matching circuit for a small GPS antenna was designed. A negative impedance converter circuit consisting of Linvill's cross-coupled pair transistors was fabricated and its stability was verified by the time-domain stability analysis. In addition, anechoic chamber measurements show that the non-Foster matching circuit for small GPS antenna can lead bore-sight gain improvement by more than 17 dB.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.506-511
• /
• 2010

This paper presents development activities of the T700/701K turbo-shaft engine for Korean Utility Helicopter(KUH). The T700/701K is the first rear-drive variant of the GE's T700 engine which is proven for military applications in the world. The main workscope of the development includes a modification from a front-drive engine to a rear-drive one, an performance enhancement of the power turbine and an incorporation of two channel FADEC(Full Authority Digital Engine Control) system for more reliable operation. The first engine run for development and qualification test was successfully completed in 2008. Since the PFRT(Preliminary Flight Rating Test) has been completed, the first flight of the engine installed in the first prototype of KUH has been successfully demonstrated in March, 2010 and the engine installation compatibility tests are being carried out during KUH flight test. The test and evaluation for qualification of the engine has been done except for the LCF test up to date.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.71-78
• /
• 2015

Although there are differences in the classification of category adopted by each country, small UAS is usually classified as the one less than 25 kg. UAS has been mainly used for military and public purposes, but in recent years, it has spread to the private sector for hobby, media, and so on. Especially, considering the nature of the operating region and applications, it is necessary to improve operating time, noise and vibration in small UAS to ensure the same level of safety with a manned aircraft. This is because the drone can pose health and safety hazard through collision with manned aircraft or crashing into the ground. In this paper, we investigated operational regulations in the United States and European countries. Based on the investigation, a domestic system development plan for small UAS operation is under development.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.13.1-13.1
• /
• 2009

Transparent electronics has attracted many interests, for it can open new applications for consumer electronics, transportation, business, and military. Among them, display backplane, thin film transistor (TFT) array would be the most attractive application. Many researchers have been investigating oxide semiconductors for transparent channel material of TFT since the report for transparent amorphous oxide semiconductor (TAOS) TFT by Hosono group and ZnO TFT by Wager group. Especially, oxide TFTs have been intensively investigated during a couple of years since the first demonstration of ZnO-TFT driving AM-OLED. Many papers regarding the fabrication and performance of oxide TFTs, and active matrix display driven by oxide TFTs have been reported. Now lots of people have confidence in the competitiveness of oxide TFTs for the backplane of AM-Display. Especially, high mobility, uniformity, fairly good stability, and low cost process make oxide TFTs applied even to a large size AM-OLED. Last year, Samsung mobile display, former SID, reported 12" AM-OLED driven by IZGO-TFT and it seems that the remained issue for the mass production is the bias temperature stability. Here, we will introduce the application of oxide TFT and important issue for oxide TFT to be used for the direct printing.

• Carbon letters
• /
• v.18
• /
• pp.18-23
• /
• 2016

Polyacrylonitrile (PAN)-based carbon fibers have high specific strength, elastic modulus, thermal resistance, and thermal conductivity. Due to these properties, they have been increasingly widely used in various spheres including leisure, aviation, aerospace, military, and energy applications. However, if exposed to air at high temperatures, they are oxidized, thus weakening the properties of carbon fibers and carbon composite materials. As such, it is important to understand the oxidation reactions of carbon fibers, which are often used as a reinforcement for composite materials. PAN-based carbon fibers T300 and T700 were isothermally oxidized in air, and microstructural changes caused by oxidation reactions were examined. The results showed a decrease in the rate of oxidation with increasing burn-off for both T300 and T700 fibers. The rate of oxidation of T300 fibers was two times faster than that of T700 fibers. The diameter of T700 fibers decreased linearly with increasing burn-off. The diameter of T300 also decreased with increasing burn-off but at slower rates over time. Cross-sectional observations after oxidation reactions revealed hollow cores in the longitudinal direction for both T300 and T700 fibers. The formation of hollow cores after oxidation can be traced to differences in the fabrication process such as the starting material and final heat treatment temperature.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.901-906
• /
• 2019

UAV (Unmanned Aerial Vehicle) is widely used in various areas such as civil and military applications including entertainment industries. Among them, UAV based communication system is also one of the important application areas. Relays have been received much attention in communication system due to its benefits of performance enhancement and coverage extension. In this paper, we investigate UAVs as relays especially focusing on physical layer. First, we introduce the research on UAV application for the relays, then the basic performance of relay networks in dual-hop communication system is analyzed by adopting decode-and-forward (DF) relaying protocol. The performance is represented using symbol error rate (SER) and UAV channels are applied by assuming asymmetric environments. Based on the performance analysis, we discuss performance enhancement issues by considering physical layer.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.293-300
• /
• 2008

Efficient designing of SRM Grains in the field of Rocketry is still the main test for most of the nations of world for scientific studies, commercial and military applications. There is a strong need to enhance thrust, improve the effectiveness of SRM and reduce mass of motor and burning time so as to allow the general design to increase the weight of payload/on board electronics. Moreover burning time can be increased while keeping the weight of the propellant and thrust in desired range, so as to give the time to control / general design group in active phase for incorporating delayed cut off if required. A mathematical design, optimization & analysis technique for Slotted Tube Grain has been discussed in this paper. In order to avoid the uncertainties that whether the Slotted Tube grain configuration being designed is best suited for achieving the set design goals and optimal of all the available designs or not, an efficient technique for designing SRM Grain and then getting optimal solution is must. The research work proposed herein addresses and emphasizes a design methodology to design and optimize Slotted Tube Grain considering particular test cases for which the design objectives and constraints have been given. In depth study of the optimized solution have been conducted thereby affects of all the independent parametric design variables on optimal solution & design objectives have been examined and analyzed in detail. In doing so, the design objectives and constraints have been set, geometric parameters of slotted tube grain have been identified, performance prediction parameters have been calculated, thereafter preliminary designs completed and finally optimal design reached. A Software has been developed in MATLAB for designing and optimization of Slotted Tube grains.