• 한국안전학회지
• /
• 제27권5호
• /
• pp.203-210
• /
• 2012

Traffic accident risk of young drivers(less than 25) is reported to have 8 times as high as that of middle aged drivers(between 30 and 49). Despite the rise of traffic accident risk, few have been attempted to take a look into driving characteristics of young drivers. The purpose of this paper is to analyze age-specific risks of young driver by means of database of insurance and vehicle inspection, thereby collecting data such as age, vehicle mileage, injuries and so on. We conducted Data-Mining(CART) and Portfolio analysis according to age groups(every 10 years). The conclusions which can be drawn from this empirical study are as follows: (1) Despite the fact that young drivers have low vehicle mileage, the rate of fatality is relatively high. (2) Being concerned of vehicle mileage, 24,000km of driving experience is thought to be critical in differing in fatality rate. Having annual average mileage fewer than 24,169 km, accident frequency is relatively lower than that exceeding 24,169 km(1,571 cases). Backed upon these, some recommendations about driver's license system for young driver to improve are given.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권1호
• /
• pp.1-13
• /
• 2008

A methodology for collection and analysis of automotive field reliability data is presented. Automotive warranty system usually covers a pre-determined period of time and/or mileage accumulation. Therefore mileage information for the vehicles that have not experienced any failure or problems during the warranty period is not available. In this paper, a reliability analysis method using the estimated mileage distribution from an additional survey for vehicles that have not any record during the warranty period is proposed. Methods of reliability analysis using the warranty information collected under the EU and US warranty policies are also provided.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.13-18
• /
• 2016

KTX wheelset bearings have thus far been maintained in accordance with the maintenance system of French national railway company, SNCF. The overhaul cycle time (OCT) of KTX wheelset bearings is now 1.4 million km in mileage. This value, however, has not been validated in Korea that has much different railway environments with France. In fact, it is impossible to validate OCT of wheelset bearings directly because they are disassembled and cleaned only when some faults are detected. In this paper, the accuracy of the current OCT value was evaluated indirectly by investigating the effect of grease lubricants on the bearing life. Five grease samples (one new and four aged greases) were used in this study. Four aged greases of different conditions were obtained from four wheelset bearings whose mileages were about 0.3, 1.2, 1.3, and 1.8 million km, respectively. Each grease sample was then injected into the RCF (Rolling Contact Fatigue) tester and fatigue lifetime was experimentally estimated. In addition, the wt% of Fe in each grease sample was analysed. The experiment results reveal that the bearing lifetime is inversely proportional to the mileage of grease sample while the wt% of Fe increases with the mileage of grease sample. Based on the experimental results, it can be concluded that the current OCT value is appropriate for the first overhaul of wheelset bearings. However, further validation is required to determine the second and third OCT values.

• 한국경영정보학회:학술대회논문집
• /
• 한국경영정보학회 2007년도 International Conference
• /
• pp.667-672
• /
• 2007

IT의 발달로 인해 기존 마케팅의 한 수단이던 로열티 프로그램인 마일리지는 최초의 형태와는 다르게 현재에는 다양한 형태와 매체로 변화되었고 사용되고 있다. 이러한 마일리지의 발전단계는 초기의 단일 마일리지에서 점차 제휴의 형태로 변화되고 있으며, 현재는 부분적인 통합의 단계로 발전하고 있다. 이에 따라 본 연구에서는 마일리지와 전자화폐의 유형을 정리하고 현재 마일리지의 문제점을 해결하기 위해 통합 마일리지로의 전환과 필요성을 제시하였다. 통합 마일리지에 대한 한 방법으로 전자화폐를 통한 마일리지의 참여 주체인 소비자, 사업자, 정부의 입장별로 나누어 각각의 제안점을 제시하고자 한다.

• 한국산업정보학회논문지
• /
• 제27권6호
• /
• pp.59-68
• /
• 2022

우리는 자동차 소유자에게 자동차 소모품의 교체 주기를 알려주는 자동차 유지관리 지원 장치를 제안한다. 소모품 교체 주기를 놓친다면 차량의 상태가 악화되기 때문에 권장 기간 내에 소모품을 교체하는 것이 중요하다. 자동차 유지관리 지원 시스템은 설치된 차량의 주행 거리를 기준으로 차량 소유자가 정하는 교체 시간을 알려준다. 이 시스템은 On Board Diagnostics-II 포트에 노출된 Electronic Control Unit과 계기판 사이의 통신을 위해 Controller Area Network 인터페이스에서 획득한 속도 정보를 통합하여 차량 주행 거리를 계산한다. 이를 통해 시스템에 추가 배선이 필요하지 않다. 시스템의 주행 거리를 차량의 계기판과 비교하여 시스템의 오차가 0.28%에 불과하다는 것을 확인하였다. 자동차의 일반적인 조건으로는 무시할 수 있는 15mW를 소비하는 저전력 모드로 자동으로 진입해 점화 스위치가 꺼졌을 때 차량 배터리가 방전되는 것을 방지한다.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.521-528
• /
• 2009

One of reliability measurements of vehicle is estimated by driving mileage but the reliability of component, such as an hydraulic clutch system, is defined from the number of successful operational cycle. Relationship between these reliability measurement variables(mileage and cycle) should be examined first of all in the reliability estimation of components. Relationship between mileage and cycles is commonly known as linear function. However, the gradient depends on the operational environmental condition. Therefore, estimation of mission profile variable should be done with correlation analysis at the same time. In this paper, we derive mission profile variable of an hydraulic clutch system by field vehicle test and suggest the determination process of durability test parameters of CMC(Clutch Master Cylinder) with mission profile variable.

• 한국대기환경학회지
• /
• 제11권2호
• /
• pp.153-162
• /
• 1995

As exhaust emission standards for new passenger cars amended in 1987 have become more stringent, vehicle manufacturers have employed three-way catalyst in order to meet these requirements. The purpose of this study was to gather informations on new emission control systems in customer use for in-use vehicles from the 1987 through 1992 model years were capable of achieving low exhaust emission levels although high levels do occur due to defects, deterioration or maladjustments with the emission control equipment. The vehicles with closed loop electronic control fuel injection system emitted low exhaust emission, but the carburetor control system equipped vehicles emitted high exhaust emissions and the high mileage vehicles exhibited higher average emissions than low mileage vehicles. It was also found that the useful life of 80, 000km is very important to maintain the low emission levels within customer service period.

• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.373-381
• /
• 2017

The electric vehicle market has increased rapidly in recent years. Established global automakers have announced that electric cars will be developed and distributed. Furthermore, current electric cars are not merely breezes, instead, they are the mainstream of automobiles. However, high prices, short mileage, and long charge times are the main obstacles to the spread of electric vehicles. To solve these problems, the competition for technology development for the expansion of electric vehicles worldwide intensifies because of the improvements in mileage, price reduction, and expansion of charging infrastructure. In this paper, the trends in the development of key technologies for electric vehicles in overseas markets and the present strategic goals for the development of key technologies for electric vehicles in Korea will be identified.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1987-1993
• /
• 2016

창의융합교육의 핵심은 학습자들로 하여금 실제로 '할 수 있는' 능력을 갖추도록 하는 것이다. 이를 위해 대학 의교육과정에 사회와 기업이 원하는 인재가 갖추어야 할 역량을 선정하고, 선정된 역량에 기반 하여 역량중심 비교과과정 체계 및 운영체계를 개발 하였다. 창의 융합 형 인재를 '협업 형 창의융합인재, 브리꼴레르'로 정의하고, 이러한 인재가 갖추어야 할 핵심역량을 TX역량으로 규정하였다. T역량은 인문소양, 분야별 전문성으로 구성하였고, X역량은 창의적 문제해결력, 융합적 사고력, 자기주도 학습역량, 협력적 리더십으로 구성하였다. 비교과영역의 과정 개발을 통하여 학습자 역량 개발을 위한 과정을 적극 제공하고 관리를 체계화하여 학생들의 교내외 활동의 참여정도 및 성과에 대하여 마일리지점수를 부여하는 운영시스템을 체계화 하였다. 본 연구는 교과영역의 제한된 틀을 넘어 학습자의 다원적 역량을 개발할 수 있는 역량기반 비교과과정 및 그 운영체계의 시한적 모델이 될 수 있으리라 본다.

• 한국분무공학회지
• /
• 제27권3호
• /
• pp.155-160
• /
• 2022

Recently, major developed countries have strengthened automobile fuel efficiency regulations and carbon dioxide emission allowance standards to curb climate change caused by global warming worldwide. Accordingly, research and manufacturing on electric vehicles that do not emit pollutants during actual driving on the road are being conducted. Several automobile companies are producing and testing electric vehicles to commercialize them, but it takes a lot of manpower and time to test and evaluate mass-produced electric vehicles with driving mileage of more than 300km on a per-charge. Therefore, in order to reduce this, a simulation model was developed in this study. This study used vehicle information and MCT speed profile of small electric vehicle as basic data. It was developed by applying Simulink, which models the system in a block diagram method using MATLAB software. Based on the vehicle dynamics, the simulation model consisted of major components of electric vehicles such as motor, battery, wheel/tire, brake, and acceleration. Through the development model, the amount of change in battery SOC and the mileage during driving were calculated. For verification, battery SOC data and vehicle speed data were compared and analyzed using CAN communication during the chassis dynamometer test. In addition, the reliability of the simulation model was confirmed through an analysis of the correlation between the result data and the data acquired through CAN communication.