• The Korean Journal of Physiology and Pharmacology
• /
• 제8권6호
• /
• pp.345-349
• /
• 2004

Heat shock ($43^{\circ}C$ for 60 minutes) is sufficient to induce apoptosis in a wide number of cell lines. In this study, we asked whether DNA strand breaks are responsible for this phenomenon. Using the highly sensitive comet assay for DNA damage detection, we were unable to demonstrate DNA breaks immediately after heat shock in Raji human Iymphoid cells. It showed that DNA breaks were not necessary for hyperthermic apoptosis, since its activity is indicative of DNA lesions. Here, we present a suggestion that a protein(s) is the major target for heat shock apoptosis. We firstly found glycerol, which reportedly stabilizes protein structure, showed a protective effect in Raji cells against hyperthermic apoptosis. In addition, quercetin, which modulates transcription of the heat shock protein family members, enhanced apoptotic death induced by hyperthermia. Furthermore, Raji cells are protected by a pre-mild heat treatment prior to the killing dose of heat shock.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1166-1180
• /
• 1990

본 연구에서는 열간 반경단조를 해석하는데 있어서 재료의 변형 해석은 강-점 소성해석법으로 해석하고 온도분포도 유한 요소법으로 해석한다.

• Preventive Nutrition and Food Science
• /
• 제9권2호
• /
• pp.144-149
• /
• 2004

Changes in functional constituents of grape (Vitis vinifera) seeds prepared by three different heat pretreatments were determined and compared with those of non-treated grape seed. The recovery of grape seed oils was generally increased by roasting, steaming and microwave processes, although the recovery of specific constituents varied among three heat pretreatments. The recovery of MeOH extracts of the seeds increased following the roasting process, whereas that of MeOH extracts decreased gradually with steaming and microwave treatments. Levels of four catechins in grape seeds: (+)-catechin, procyanidin B$_2$, (-)-epicatechin, and (-)-epicatechin gallate, were decreased with increased roasting and steaming time, but were unaffected by microwave treatment. During the three different heat pretreatments, levels and compositions of fatty acid did not change, whereas those of phytosterol compositions decreased greatly. These results suggest that a mild heat pretreatment, controlled for temperature and time, is needed to prevent a considerable loss in the level of valuable functional components in grape seed.

• 생명과학회지
• /
• 제19권12호
• /
• pp.1705-1711
• /
• 2009

항암제 내성을 획득한 암세포는 많은 경우 다양한 세포 독성 물질에 대해 교차 내성을 나타낸다. 그러나 온열 치료가 내성 획득 종양에 적용 될 때의 종양 세포의 사멸 효과는 알려져 있지 않다. 본 연구는 시스플라틴에 내성을 갖는 위암 세포 주, SNU601/Cis2이 열충격에 반응하는 민감도와 세포 사멸 방식을 조사함으로써 약물 내성 종양의 온열 치료 효과를 예측하고자 하였다. 정상 위암 세포 주 SNU601/WT은 열충격에 매우 민감하게 반응하며 apoptosis로 사멸하지만, 내성 위암 세포 주 SNU601/Cis2는 미열충격에 내성을 나타내었으며 고열충격에 노출되자 necrosis로 사멸하였다. 또한 SNU601/Cis2에서 necrosis의 발생은 열충격에 의한 JNK1/2의 활성화와 HSP27의 발현저하 현상과 관련되어 있었다. Necrosis의 유도는 세포막 파괴에 의해 세포 내부 물질의 방출로 인한 주변 조직의 염증반응을 수반하는데, 이러한 염증 반응은 암의 성장을 촉진하고 암의 성상을 심화시키는 것으로 보고되고 있다. 이러한 관점에서, 온열 치료가 약물 치료와 병행 될 경우에는 교차 내성과 necrosis로 인한 역효과를 방지하기 위하여, 그 적용이 주의 깊게 이루어져야 할 것으로 판단된다.

• Medical Lasers
• /
• 제9권2호
• /
• pp.159-165
• /
• 2020

Background and Objectives The ultimate goal in current skin rejuvenation practice is to achieve a good result with minimal pain and downtime. Nonablative skin rejuvenation (NSR) is one technique. The efficacy of the long-pulsed 1064 nm Nd:YAG laser (LPNDY) has not been assessed in NSR. Materials and Methods Three target areas were selected (bilateral cheeks and glabellar region) in six volunteer subjects. A LPNDY with an integral skin temperature monitor delivered three stacked shots to each target area (1064 nm, 12 mm spot, 13 J/cm², 1 Hz) without any skin cooling or anesthesia. The skin temperature was recorded before, during, and after each set of shots using the system monitor and in real-time using a high-sensitivity (±0.001℃) near-infrared video camera. The skin reaction was observed with the naked eye, and pain and discomfort were assessed by the subjects during and after treatment. Results The subjects reported a mild feeling of heat with no discomfort during or after the test treatments. Mild erythema was observed around the treatment areas, without noticeable edema. A series of three ascending skin temperature stepwise peaks, with a decrease in skin temperature towards the baseline after the third shot, was observed consistently. The mean temperatures for shots 1, 2, and 3 for the cheeks were 39.5℃, 42.0℃, and 44.4℃, respectively, and for the glabella, 40.8℃, 43.9℃, and 46.2℃, respectively. Similar ranges were indicated on the system integral temperature monitor. Conclusion A set of three stacked pulses with the LPNDY at a low fluence achieved ideal dermal temperatures to achieve some dermal remodeling but without any downtime or adverse events. The temperature data from the integral thermal sensor matched the video camera measurements with practical accuracy for skin rejuvenation requirements. These data suggest that LPNDY would satisfy the necessary criteria to achieve effective NSR, but further studies will be needed to assess the actual results in clinical practice.

• Journal of Welding and Joining
• /
• 제16권1호
• /
• pp.114-124
• /
• 1998

The effect of matrix phase (austenite, pearlite, martensite) on the low stress abrasion resistance in the chromium-carbide-type high Cr white iorn hardfacing weld deposites has been investigated. In order to examine matrix phase, a series of alloys with different matrix phase by changing the ratio of Cr/C system by heat treatment were employed. The alloys were deposited twice on a mild steel plate using self-shielding flux cored arc welding process. The low stress abrasion resistance of the alloys against sands was measured by the Dry Sand/Rubber Wheel Abrasion Test(RWAT). Even though formation of pearlite phase in the matrix showed higher hardness than that of austenite, there was no observable difference in wear resistance between the pearlite and austenite phase for the same amount of chromium-carbide in the matrix. On the other hand, the formation of martensitic phase,, from heat treated austenitic alloys (high content of Cr), enhanced wear resistance due to its fine secondary precipitates.

• 한국자동차공학회논문집
• /
• 제17권4호
• /
• pp.48-54
• /
• 2009

The demand for formable high-strength steel (HSS) sheets has recently increased to reduce the weight of automotive bodies. The 340MPa (Tensile Strength) grade steel sheets are widely used for body inner and outer panels. Especially, super formable 340MPa grade steel sheets with high r-value have an excellent deep drawability compared with the other 340MPa grade steel sheets. It is very available for a part such as rear floor, center floor and dash panels used conventional mild steels up to now. We developed a super formable HSS by optimization of chemical composition, texture control and heat treatment control. It has good mechanical properties with excellent formability (tensile strength: 343MPa, elongation: 41.1% and $\bar{r}=2.1$).

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권6호
• /
• pp.884-891
• /
• 2005

This paper describes the purification and properties of a multicatalytic proteinase complex, proteasome, from bovine skeletal muscle, in comparision with proteasome prepared from other species or organs. The purified bovine skeletal muscle proteasome exhibited a single band on polyacrylamide gel electrophoresis under nondenaturing conditions. Bovine skeletal muscle proteasome degraded synthetic peptides maximally at pH 8.0. Relative to pH 8.0, activities were gradually decreased with the lowering pH, but the extent of decrease was substrate-dependent, and the activity at pH 5.5 still retained 78-10% of the activity at pH 8.0, indicating the possibility that the proteasome is active in muscle during aging. When the proteasome was heated at 60$^{\circ}C$ for 15 or 30 min and treated in the presence of 0.0125% SDS, the activity increased over 1.8 and 3.1 times (LLVY (Suc-Leu-Leu-Val-Tyr-NH-Mec) as a substrate), respectively. These results (activation with heat or SDS) indicate that the hydrolytic activity of proteasome was stimulated under mild denaturing conditions. The characteristics of the bovine skeletal muscle proteasome obtained in our experiment were almost the same as those of the proteasome prepared from other species or organs.

• 열처리공학회지
• /
• 제11권3호
• /
• pp.159-167
• /
• 1998

In this study, friction-wear test was carried out on the carburized layer depth of a mechanical structure steel SNCM carburized with RX and LPG for 7hrs at $930^{\circ}C$ and also the wear properties of wear loss, wear rate, coefficient of friction, friction force and friction temperature were investigated. The wear properties for carburized layer of SNCM were tested on dry condition at the room temperature by the thrust load of 49~245N range at sliding speed of 0.2m/sec and the sliding speed of 0.2~1.0m/sec range at thrust load of 98N. Wear loss on the depth of carburizing layer was increased with increasing of thrust load and sliding speed, and with decreasing of hardness. The condition of worn surfaces were showed mild wear at less than the thrust load of 98N and sliding speed of 0.6m/sec but were showed severe wear at more than 98N and 0.6m/sec. The friction load and temperature were increased with increasing of thrust load but with increasing sliding speed was appeared minimum at 0.6m/sec. With increasing thrust load the wear rate was increased and the coefficient of friction was decreased, but with increasing sliding speed the wear rate and the coefficient of friction were decreased in 0.2~0.6m/sec and increased in 0.6~1.0m/sec, therefore 0.6m/sec in this testing is a transition velocity.

• 한국식품과학회지
• /
• 제46권5호
• /
• pp.588-592
• /
• 2014

본 연구는 다진 생강에 다량 함유된 6-gingerol을 뇌질환 개선 등의 기능성이 보고된 6-shogaol로 변환시키기 위하여 $CO_2$를 이용한 6.4MPa의 가압조건에서 가열 온도와 시간을 변수로 두고 중심합성설계법을 이용한 최적반응표면분석법을 적용하였다. 적용 온도 $70-130^{\circ}C$ ($X_1$)와 적용 시간 95-265분($X_2$)을 독립변수로, 6-gingerol함량($Y_1$, mg/g dried ginger)와 6-shogaol함량($Y_2$, mg/g dried ginger)을 종속변수로 설정하였다. 그 결과 온도와 시간이 대체적으로 증가할수록 6-gingerol은 감소하였으며 반대로 6-shogaol은 증가하였다. 도출된 반응표면 설계를 분석한 결과 압력이 6.4 MPa일 경우 적용 온도($X_1$)는 $130^{\circ}C$, 적용 시간($X_2$)는 204분이었다. 최적반응표면분석 결과 예측된 6-gingerol과 6-shogaol 함량은 각각 건조시킨 생강을 기준으로 0.13, 3.85 mg/g이며, 이때 만족도는 0.991이었다. 본 실험 결과를 통하여 도출된 가압조건에서의 열처리 방법은 스팀 등을 이용한 물리적 열처리 기술에 비해 소요 시간과 소모되는 에너지를 줄일 수 있었고, 6-gingerol에서 6-shogaol로의 변환율이 탁월하기 때문에 친환경적이고 효율적인 6-shogaol을 얻을 수 있는 기술임을 확인할 수 있었다.