• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.79-84
• /
• 1994

The mechanism of activated sintering of tungsten powder was discussed in terms of diffusion and segregation of activator atoms at W grain boundaries. Shrinkage behaviours of W-0.2wt.% Ni, W-0.2wt.% Cu or pure W powder compacts during sintering at low temperatures of 900~ $1200^{\circ}C$ were investigated. It was found that the Cu additive inhibits sintering process causing lower densification than pure W compact while remarkable shrinkage occurred in the Ni added W powder. Such contrary effect was explained by comparing self diffusion processes along Ni or Cu segregated W boundaries in which Ni segregants enhance but Cu atoms retard the migration of W atoms at W boundaries.

• Journal of Surface Science and Engineering
• /
• v.24 no.3
• /
• pp.137-143
• /
• 1991

The relation between the ion irradiation induced grain growth and the basic parameters sinvolved in ion beam mixing process was studied. TEM micrographs showed that a significant grain growth has been induced by Ar+ irradiation at room temperature. The grain size increases rapidly in low dose region, while it approaches a saturated value in high dose region, and it has close relationship with nuclear energy deposition and thermodynamic properties such as cohesive energy ( Hc) and heat of mixing ( Hm). A model for the grain growth based on the thermal spike induced atomic migration was developed and applied to interpret experimental results.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.503-508
• /
• 2015

The adsorption characteristics of ammonia on MSWI bottom ash were investigated. The effect of the variation of the landfill environmental parameters including pH, anions and organic matter on the adsorption process was discussed. Results showed that the adsorption could be well described by pseudo-second-order kinetics and Langmuir model, with a maximum adsorption capacity of 156.2 mg/g. The optimum adsorption of ammonia was observed when the pH was 6.0. High level of ion and organic matter could restrict the adsorption to a low level. The above results suggested that MSWI bottom ash could affect the migration of ammonia in the landfill, which is related to the variation of the landfill circumstance.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1177-1184
• /
• 2005

Ab initio quantum chemical molecular orbital calculations have been performed for the unimolecular decomposition of methacrylonitrile ($CH_3C(CN)=CH_2$), especially for HCN and $H_2$ molecular elimination channels. Structures and energies of the reactants, products, and relevant species along the individual reaction pathways were determined by MP2 gradient optimization and MP4 single point energy calculations. Direct four-center elimination of HCN and three-center elimination of H2 channels were identified. In addition, H or CN migration followed by HCN or H2 elimination channels via the methylcyanoethylidene intermediate was also identified. Unlike the case of crotonitrile previously studied, in which the dominant decomposition process was the direct three-center elimination of HCN, the most important reaction pathway should be the direct threecenter elimination of $H_2$ in the case of methacrylonitrile.

• Journal of Integrative Natural Science
• /
• v.9 no.3
• /
• pp.171-176
• /
• 2016

Rap1 is a key regulator of cell adhesion and migration. Although increasing evidence indicates that the Rap1 signaling pathway is involved in the process of bone remodeling, the mechanism by which Rap1 regulates osteoblastic differentiation and cell adhesion remains unknown. Here, we investigated the morphological characteristics and osteoblastic differentiation of cells expressing constitutively activated form of Rap1A (Rap1ACA) or Rap1 GTPase activating protein Rap1GAP and found that activated Rap1 induces osteoblastic differentiation and cell adhesion as well as cell spreading. When osteoblastic differentiation was induced, Rap1ACA cells showed considerably higher levels of calcium deposits than the wild-type and Rap1GAP-overexpressing cells did. Rap1ACA cells showed increased spreading and size, as well as strong cell adhesion and significantly decreased growth rates. F-actin staining using phalloidin revealed several thin thread-like filopodia around the protrusions in Rap1ACA cells, which possibly contribute to the increased cell adhesion.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.551-555
• /
• 2017

Tissue optics is a well-established and extensively studied area. In the last decades, Monte Carlo simulation (MCS) has been one of the standard tools for simulation of light propagation in turbid media. The utilization of parallel processing exhibits dramatic increase in the speed of MCS's of photon migration. Some calculations based on MCS can be completed within a few seconds. Since the MCS's have the potential to become a real time calculation method, a dynamic accuracy estimation, which is also known as history by history statistical estimators, is required in the simulation code to automatically terminate the MCS as the results' accuracy achieves a high enough level. In this work, spatial and time-domain GPU-based MCS, adopting the dynamic accuracy estimation, are performed to calculate the light dose/reflectance in homogeneous and heterogeneous tissue media. This dynamic accuracy estimation can effectively derive the statistical error of optical dose/reflectance during the parallel Monte Carlo process.

• Journal of the Korean Ceramic Society
• /
• v.27 no.6
• /
• pp.755-762
• /
• 1990

The tungsten paste was printed on the surface of 92% alumina sheet which was made by type casting process. The printed tungsten was bonded on the Al2O3 by co-firing in reducing atmosphere. During the co-firing, the binder burn-out was easier in wet H2 atmosphere than in dry H2, which affected sintered density. In practically, the use of wet H2 above 100$0^{\circ}C$ was beneficial for density of alumina and bond strength. This phenomena occured more distinctly when atmosphere varied from dry H2 to wet H2 than varied dew point in wet H2. In wet H2, the improvement in bonding strength can be attributed to good glass migration into the metal layer due to inhibition of the tungsten particle growth, with increase of alumina density, at the temperatrue higher than 100$0^{\circ}C$.

• Computers and Concrete
• /
• v.13 no.2
• /
• pp.149-171
• /
• 2014

This study presents the mathematical model for predicting chloride penetration into saturated concrete under non-isothermal condition. The model considers not only diffusion mechanism but also migration process of chloride ions and other chemical species in concrete pore solution such as sodium, potassium, and hydroxyl ions. The coupled multi-ionic transport in concrete is described by the Nernst-Planck equation associated with electro-neutrality condition. The coupling parameter taken into account the effect of temperature on ion diffusion obtained from available test data is proposed and explicitly incorporated in the governing equations. The coupled transport equations are solved using the finite element method. The numerical results are validated with available experimental data and the comparison shows a good agreement.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.562-568
• /
• 2001

인터넷 환경에서 유휴 컴퓨팅 자원들을 활용하여 병렬 작업들을 분산 처리하는 많은 연구들이 선행 되어왔다. 기존의 방법들을 프로세스(Process)기반으로 자원의 낭비가 심하고, 부하 균등화에 있어 많은 문제점들이 있다. 또한 매우 큰 작업들은 연산 시간이 수시간에서 몇 일씩 소요되는 경우가 있다. 이러한 작업들의 연산에 있어서 결함 허용이 제공되지 않은 경우 전체 소요 시간이 급격히 늘어 날 수 있다. 이러한 문제점을 해결하기 위해 본 연구에서는 이동 에이전트의 이주 전략을 사용, 결함 허용이 가능한 동적 부하 균등화 기법을 새롭게 제안한다. 본 논문에서의 방법은 SPMD형의 연산작업에 효과적으로 적용 가능하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.656-665
• /
• 1992

In this paper, the performance of the various multiple access techniques for the mobile computer network has been studiedi in the consideration of the charactersitics of the mobile cimmunication channel. In the case of the hidden node occurring. It could be seen that the performance of the code division multiple access (CDMA) technique with simultaneous access function is better than that of the other packet access methods such as carrier sendsed multiple access (CDMA), busy tone multiple access (BTMA) and idle signal multiple access (ISMA) in the view of the throughput and mean delay time. Also, it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access (CSMA), etc. when the fading effect or impulsive noise exists in the mobile channel, Especially, in the case of the distributed mobile network it has been shown that the receivertransmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.