• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.459-463
• /
• 2003

Waveform inversion requires extracting a reliable low frequency content of seismic data for estimating of the low wave number velocity model. The low frequency content of the seismic data is usually discarded or neglected because of the band-limited response of the source and the receivers. In this study, however small the spectral of the low frequency seismic data is, we assume that it is possible to extract a reliable phase information of the low frequency from the seismic data and use it in waveform inversion. To this end, we exploit the frequency domain finite element modeling and source-receiver reciprocity to calculate the $Frech\`{e}t$ derivative of the phase of the seismic data with respect to the earth model parameter such as velocity, and then apply a damped least squares method to invert the phase of the seismic data. Through numerical example, we will attempt to demonstrate the feasibility of our method in estimating the correct velocity model for prestack depth migration.

• Smart Structures and Systems
• /
• v.4 no.4
• /
• pp.449-464
• /
• 2008

An array based, outward monitoring, ultrasonic guided wave based SHM technique using a single transmitter and multiple receivers (STMR), with a small footprint is discussed here. The previous implementation of such SHM arrays used a phase-reconstruction algorithm (that is similar to the beam-steering algorithm) for the imaging of reflectors. These algorithms were found to have a limitation during the imaging of defects/reflectors that are present in the "near-field" of the array. Here, the "near-field" is defined to be approximately 3-4 times the diameter of the compact array. This limitation is caused by approximations in the beam-steering reconstruction algorithm. In this paper, a migration-based reconstruction algorithm, with dispersion correction in the frequency domain, is discussed. Simulation and experimental studies are used to demonstrate that this algorithm improves the reconstruction in the "near-field" without decreasing the ability to reconstruct defects in the "far-field" in both isotropic and anisotropic plates.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.69-77
• /
• 2003

Measurements of backscattered intensity were made over a shallow water using 300 ㎑and 1200 ㎑ bottom mounted ADCP (Acoustic Doppler Current Profiler) to determine the temporal variability of vertical distribution of high-frequency volume scattering strength (Sv). The variability of Sv in relatively deep water column(85 m and 113 m was due to the daily vertical migration, probably of larger zooplankton. However it was not found with 1200㎑ data at shallow water column. From the empirical orthogonal function (EOF) analysis using 1200㎑ data, the vertical distribution of the first mode eigenvectors of Sv is characterized by the presence of the maximum values near the bottom of the water.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.988-998
• /
• 2014

For memory-based big data storage, using hybrid memories consisting of both dynamic random-access memory (DRAM) and non-volatile random-access memories (NVRAMs) is a promising approach. DRAM supports low access time but consumes much energy, whereas NVRAMs have high access time but do not need energy to retain data. In this paper, we propose a new data migration method that can dynamically move data pages into the most appropriate memories to exploit their strengths and alleviate their weaknesses. We predict the access frequency values of the data pages and then measure comprehensively the gains and costs of each placement choice based on these predicted values. Next, we compute the potential benefits of all choices for each candidate page to make page migration decisions. Extensive experiments show that our method improves over the existing ones the access response time by as much as a factor of four, with similar rates of energy consumption.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.495-500
• /
• 1989

The ionic conductivity of polycrystalline, glass, and glass-ceramic silicates was measured using two-terminal AC method with blocking electrode over a frequency range of 100 Hz to 100 KHz in the temperature range of $200^{\circ}C$ to $320^{\circ}C$. Analysing the capacitance (C), susceptance (B), impedance (Z), and conductance (G) under the given conditions, an equivalent circuit containing temperature and frequency dependent component is proposed. Higher capacitance could be observed in the low frequency region and on the improved ionic migration conditions i.e., at higher temperature in a better ionic conductor. Also the electrode polarization built up at the electrode-specimen interface could be sorted out above 10 KHz. However, grain boundary contribution couldn't be extracted from the bulk resistance over the frequency range measured here.

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.73-88
• /
• 2014

Vibration characteristics of columns are influenced by their axial loads. Numerous methods have been developed to quantify axial load and deformation in individual columns based on their natural frequencies. However, these methods cannot be applied to columns in a structural framing system as the natural frequency is a global parameter of the entire framing system. This paper presents an innovative method to quantify axial deformations of columns in a structural framing system using its vibration characteristics, incorporating the influence of load tributary areas, boundary conditions and load migration among the columns.

• Journal of Ecology and Environment
• /
• v.30 no.4
• /
• pp.287-292
• /
• 2007

We monitored a breeding population of the Asian toad (Bufo gargarizans), in the Wonheunge pond at Sannamdong, Chungju, from 5 March to 11 April, 2006 and 14 February to 31 March, 2007 to investigate their movement patterns, breeding population sizes, and physical characteristics. Terrestrial migration to the pond started on 5 March in 2006 and 14 February in 2007. We captured a total of 266 immigrating individuals (213 males, 53 females) in 2006 and 307 (222 males, 85 females) in 2007, and found 50 adults apparently killed by motor vehicles while migrating to the pond in 2007. Emigration from the pond to terrestrial sites started on 15 March 2006 and 5 March 2007. We captured a total of 245 emigrating toads (181 males, 65 females) in 2006 and 99 (92 males, 7 females) in 2007. An additional 10 emigrating adults were found dead on the road. During both the immigration and emigration periods, two peaks in capture frequency appeared for each sex in each breeding season. The immigration peaks corresponded with higher temperatures, while the emigration peaks corresponded with high humidity. Migrating Asian toads showed sexual size dimorphism and a male-biased sex ratio. Body weights and SVL (snout-vent length) of immigrating and emigrating individuals were negatively related with migration dates.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.4
• /
• pp.31-43
• /
• 2022

Startups are recognized as the vitality of the economy, and countries are competing to attract competitive overseas entrepreneurs and startups to their own startup ecosystem. In this global trend, entrepreneurs cross the border without hesitation, expecting abundant available resources and a startup friendly environment. Despite the increasing frequency of start-up migration between countries, studies related to this are very rare. Therefore, this study has chosen the cross-border migration of startups between countries as a research topic, and those who have been involved in the cross-border entrepreneurial migration to South Korea as a research sample. This study consists of two stages. The first research stage hires a Delphi method to collect expert opinions and find major factors related to the global startup migration. Drawing on the prior literature on the regional startup ecosystem at the national level, this stage is to conduct expert interviews in order to discover underlying factors and subfactors important for global migration of startups. The second stage measures the importance of the factors and subfactors using the AHP model. The priorities of factors and factors were identified hiring the overseas entrepreneurs who moved to Korea as the AHP survey samples. The results of this study suggest some interesting implications. First, a group of entrepreneurs with nomadic tendencies was found in the trend of global migration of entrepreneurs. They had already started their own businesses with the same business ideas in multiple countries before settling down in Korea. Second, important unique factors and subfactors in the context of global start-up migration were identified. A good example is the government's support package, including start-up visas. Third, it was possible to know the priority of the factors and subfactors that influence the global migration of startups This study is meaningful in that it preemptively conducted exploratory research focusing on a relatively new phenomenon of global startup migration, which recently catches attention in the global startup ecosystem. At the same time, it has a limitation in that it is difficult to generalize the meanings found in this study because the research was conducted based on the case of South Korea

• Journal of Korea Water Resources Association
• /
• v.50 no.5
• /
• pp.315-324
• /
• 2017

In this study, the HEC-GeoRAS model was used to estimate the changes of flood inundation depth and area of the Hyeoam-cheon basin after the channel migration and river improvement. The target area was extremely damaged due to the heavy rainfall on 25th August, 2014 after the costruction. According to the results of the analysis, the HEC-GeoRAS model can be used to accurately estimate the changes of flood innundation depth and area in agrecultural lands and lowlands of which the topographic changes and elevation differences are small. The inundation depths were increased 0.99 m in heavy rainfall and 0.39 m in 100 year frequency flood. The inundation areas in 100 year frequency flood were reduced in inundation depths under 1.5 m while they were increased in depths above 4.5 m. It was concluded that the loss of natural resevoir capacity of agricultural lands and lowlands due to the channel migration and river improvement caused the damage of flood in 2014 and the decrease of actual effective widths of the channel added the damage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.345-349
• /
• 2003

The dynamic behavior of CANDU nuclear fuel channel was analyzed by the use of 3-dimensional finite element method, under the various fault conditions such as a fault in the end fitting support and the removal/migration of the garter spring in the fuel channel, in order to predict the dynamic behavior for a degraded symptoms of CANDU nuclear fuel channel. Moreover, the frequency response analysis for possible fault conditions was also peformed considering the effects of the pressure tube vibration and flow-induced vibration by the coolant flow. From the analysis of the frequency responses, defects in the garter spring have influenced the changes of 2nd and 3rd modes and all the important modes are varied for the failure in the journal bearing in the end fitting body.