• Korean Journal of Ecology and Environment
• /
• v.33 no.2 s.90
• /
• pp.128-135
• /
• 2000

The authors surveyed the seasonal variations of environmental factors, the distributions of heterotrophic bacteria and Anabaena cylindrica growth-inhibiting bacteria at each water layer in Daechung Reservoir to verify the role of bacteria during the extinction of bloom. Average water depth at site 1, 2, and 3 were 25.5 m, 15.0 m and 12.3 m, respectively. Water temperature showed a typical pattern seasonally. The variation of DO was relatively inverse proportional to that of water temperature, although it was irregular during summer time. DO decreased gradually to early May, fluctuated sharply after then, and followed by gradual increasement after middle of September. This variation pattern was notable at surface layer. There was remarkable difference in DO concentraion between surface layer and the other water layers during the period in which DO irregulary varied. The variation range of chlorophyll-a concentraion at surface layer in summer time was broad, and it was relatively high when DO was high. The population size of heterotrophic bacteria was high from Spring to Autumn, an declined after September when the water temperature droped rapidly. Especially this variation pattern was prominent at the surface layer. Bacteria that inhibit the growth of A. cylindrica was almost not detected by June, and its distribution increased in July. Afterward, it showed different variation pattern between each site. The distribution of A. cylindrica growth-inhibiting bacteria was higher at the middle and bottom layer than the surface layer in July and October, when it was larger at all sites for the study period. This result suggests that the antagonistic bacteria exhibit higher activity when host activity drops. These results also suggest that natural water bacteria control the distirbution of cyanobacteria, especially its activity as controller is remarkable when cyanobacterial growth declines.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.3
• /
• pp.393-407
• /
• 1997

A survey of biological and chemical characteristics in the middle-northern East Sea of Korea was carried out at 28 stations in October, 1995 on board R/V Tam-Yang. On the basis of the vertical profiles of temperature, salinity and dissolved oxygen, water masses in the study area were divided into 5 major groups; (1) Low Saline Surface Water (LSSW), (2) Tsushima Surface Water (TSW), (3) Tsushima Middle Water (TMW), (4) North Korean Cold Water (NKCW), (5) last Sea Porper Water (ESPW). Other 4 mixed water masses were also observed. It is highly possible that the LSSW which occured at depths of $0\~30m$ in the most southern part of the study area is originated from the Yangtze River (Kiang) of China due to very low salinity $(<32.0\%_{\circ})$ relatively high concentration of dissolved silicate and no sources of freshwater input into that area. Oxygen maximum layer in the vertical profile was located near surface at northern cold waters and became deeper at the warm southern area. Oxygen minimum layer af depths $50\~100m$, which is TMW, were found in only southern area. In the vortical profiles of nutrients, the concentrations were very low in the surface layer and increased drammatically near the thermocline. The highest concentration occurred in the ESPW. The relatively low value of Si/P ratio in the ESPW (13.63) compared to other reports in the East Sea was due to continuous increase of P with depth as well as Si. The N : P ratio was about 6.92, showing that nitrogenous nutrient is the limiting factor for phytoplankton growth. The exponential relationship between Si and P, compared to the linear relationship between N and P, indicates that nitrate and phosphate have approximately the same regenerative pattern, but silicate has delayed regenerative pattern.

• Journal of Internet Computing and Services
• /
• v.6 no.6
• /
• pp.85-97
• /
• 2005

In this paper, we construct the traffic information database by using the acquired data from the traffic information devices installed in road network, and, by referring to this database, propose the intersection simulation system which can dynamically manage the real-time traffic flow for each section of road from the intersections, This system consists of hierarchical 3 parts, The lower layer is the physical layer where the traffic information is acquired on an actual road. The traffic flow control framework exists in the middle layer. The framework supports the grouping of intersection, the collection of real-time traffic flow information, and the remote monitoring and control by using the traffic information of the lower layer, This layer is designed by extending the distributed object group framework we developed. In upper layer, the intersection simulator applications controlling the traffic flow by grouping the intersections exist. The components of the intersection application in our system are composed of the implementing objects based on the Time-triggered Message-triggered Object(TMO) scheme, The intersection simulation system considers the each intersection on road as an application group, and can apply the control models of dynamic traffic flow by the road's status. At this time, we use the real-time traffic information collected through inter-communication among intersections. For constructing this system, we defined the system architecture and the interaction of components on the traffic flow control framework which supports the TMO scheme and the TMO Support Middleware(TMOSM), and designed the application simulator and the user interface to the monitoring and the controlling of traffic flow.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.247-256
• /
• 2013

The carbonate sands of the Sabkha layer in the Middle East have very low shear strength. Therefore, instant settlement and time-dependent secondary settlement occur when inner voids are exposed, as in the case of particle crushing. We analyzed settlement of the Sabkha layer under a large-scale foundation by hydrotesting, and compared the field test results with the results of laboratory tests. With ongoing particle crushing, we observed the following stress-strain behaviors: strain-hardening (Sabkha GL-1.5 m), strain-perfect (Sabkha GL-7.0 m), and strain-softening (Sabkha GL-7.5 m). General shear failure occurred most frequently in dense sand and firm ground. Although the stress-strain behavior of Sabkha layer carbonate sand that of strain-softening, the particle crushing strength was low compared with the strain-hardening and strain-perfect behaviors. The stress-strain behaviors differ between carbonate sand and quartz sand. If the relative density of quartz sand is increased, the shear strength is also increased. Continuous secondary compression settlement occurred during the hydrotests, after the dissipation of porewater pressure. Particle crushing strength is relatively low in the Sabkha layer and its stress-strain behavior is strain-softening or strain-perfect. The particle crushing effect is dominant factor affecting foundation settlement in the Sabkha layer.

• Applied Microscopy
• /
• v.32 no.2
• /
• pp.175-183
• /
• 2002

In this study, we carried out immunostaining and immunogold labeling with rabbit anti-dopamine (TH) and rabbit anti-calbindin-$D_{28K}$ to examine the characteristics and functions of the neurons that secrete neurotransmitters in optic lobes of Todarodes pacificus and Octopus minor inhabiting the Korean waters. The obtained results are as follow. In the immunostaining with anti-dopamine, only a few of the large amacrine cells in an the upper part of an outer granule cell layer and the cells forming the islands of medulla showed positive reaction in Todarodes pacificus, while $2{\sim}3$ cells in the upper and middle parts of an outer granule cell layer and more than 5 cells in the islands of medulla reacted positively in Octopus minor. For the case of anti-calbindin case, $2{\sim}3$ small amacrine cells in the upper portion of the outer granule cell layer and $1{\sim}2$ cells which are located in the lower part of an inner granule cell layer showed positive reaction in Todarodes pacificus, while, in Octopus minor, 4 cells in the outer granule cell layer reacted positively, no immunoreactive cell being found in the inner granule cell layer. As a result of performing the immunogold labeling, relative large number ($17{\sim}26$) of gold particles were labeled per $0.5{\mu}m^2$ of the cytoplasm of the cells which showed the immunoreactivity to the anti-dopamine and anti-calbindin in Todarodes pacificus, however, small number (10) of gold particles were labeled in Octopus minor, which reach only half of the number in the Todarodes pacificus.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.5
• /
• pp.993-1000
• /
• 2017

When the availability of embedded device is considered, combined countermeasure such as first-order masking and hiding countermeasures is quite attractive because the security and efficiency can be provided at the same time. Especially, combined countermeasure can be applied to the confusion and diffusion layers of the first and last rounds in order to provide the efficiency. Also, the middle rounds only employs first-order masking countermeasure or no countermeasure. In this paper, we suggest a novel side channel analysis with low complexity in the output of diffusion layer. In general, the attack target cannot be set to the output of diffusion layer owing to the high complexity. When the diffusion layer of block cipher is composed of AND operations, we show that the attack complexity can be reduced. Here, we consider that the main algorithm is SEED. Then, the attack complexity with $2^{32}$ can be reduced by $2^{16}$ according to the fact that the correlation between the combination of S-box outputs and that of the outputs of diffusion layer. Moreover, compared to the fact that the main target is the output of S-box in general, we demonstrate that the required number of traces can be reduced by 43~98% in terms of simulated traces. Additionally, we show that only 8,000 traces are enough to retrieve the correct key by suggested scheme, although it fails to reveal the correct key when performing the general approach on 100,000 traces in realistic device.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.8-13
• /
• 2011

This study was carried out to investigate the change of photosynthesis, leaf and fruit according to crown layers in Actinidia arguta and hybrid kiwi. Photosynthesis rate (PPFD $1,000{\mu}mol{\cdot}m^{-2}s^{-1}$) were 5.82, 7.11, $9.54{\mu}mol\;CO_2\;m^{-2}s^{-1}$ at lower, middle, and upper position, respectively in 3 layer cultivation type. The length and area of leaves collected from lower position have lager value than upper position. The fruit quality of A. arguta and hybrid kiwifruit increased with increasing crown height. A linear correlation ($R^2=0.72$, 0.89 and 0.98) was shown between fruit weight (Boeun 4, Injea 16 and HM3) and the height of crown layer(layer 1, 2, and 3). From the results, we can suppose that the tree of the upper position of crown layer in the cultivation of A. arguta and hybrid kiwifruit produce high quality fruit due to its high photosynthesis ability.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.2
• /
• pp.107-121
• /
• 2021

The purpose of this study is to optimize the bonding method of the plywood suitable for cross-laminated timber (CLT) with plywood as a core by analyzing the flexural performance and failure mode according to the lamina species, the method of bonding plywood in the longitudinal direction, and whether or not adhesive is applied to the joint. In the case of the Douglas fir lamina layer, the modulus of elasticity decreased by about 11.5% due to longitudinal bonding, and the modulus of rupture increased or decreased according to the adhesive application and bonding method. The optimal conditions were derived as the butt joint without adhesive, half lap joint with adhesive, and butt joint. In the case of the larch lamina layer, the modulus of rupture and the modulus of elasticity decreased by about 15% and 40%, respectively. When using the half lab joint and tongue & groove joint, it is believed that it reduces the load transmitted to the middle layer by primarily preventing the failure on flexure at the joint of the plywood layer. From the results of this study, the larch lamina layer used in the manufacturing process of Ply-lam CLT did not show any difference based on the bonding method. Butt joint and half lap joint bonding method are determined to be suitable when using Douglas fir lamina layer.

• Applied Microscopy
• /
• v.30 no.4
• /
• pp.321-326
• /
• 2000

The ultrastructure of the fertilized egg envelope from pale chub , Zacco platypus belong to Cyprinidae was studied using scanning and transmission electron microscopes. The fertilized egg was an adhesive type, have a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by 5 peaks of hill. An outer surface of the fertilized egg envelope was arranged by pore canals irregularly. In section of fertilized egg, the egg envelope consistes of three layers, an outer adhesive layer, a middle electron dense layer and an inner lamellae layer consisting of 9 layers. These ultrastructural characters of fertilized egg envelope from pale chub can be utilized in taxonomy of teleost.

• Journal of Preventive Medicine and Public Health
• /
• v.2 no.1
• /
• pp.81-87
• /
• 1969

Three Combinations of cloths were evaluated for the protective effects of different kinds of clothings in cold environments. Table 1 shows the components of the three models of clothings. A prototype was made by putting a sheet of vinyl at the middle layer of raw cotton in a fabric-quilt cloths. A glove mannequin was covered by each of these cloths. The globes contained 1,000 cc of hot water about $40^{\circ}C$. Tele-thermistors were fixed in order to check the temperature of cloths space and water temperature for evaluation of calorie-loss and climate of clothings. Results are summarized as follows: 1) Without wind, there is no significant difference of air temperatures between sti-parka and quilt-wear clothing. 2) The prototype with vinyl sheet best protects against wind, the next is the ski-parka. Quilt-wear protects the least. 3) It is well-known that a working-clothing needs not have any separate liners nor outers. 4) For innermost layer of a clothing preventing cold, a cotton-fabrics is recommended and a water-proof cloths for outer layer. 5) Heat-loss was calculated from the cooling degrees of water. Calorie-loss was $910cal/m^2/hr$. when bared, but with the prototype of vinyl sheets the calorie-loss was $350cal/m^2/hr$. (38.5% of bared). Quilt-wear and ski-parka were 380(41.8%) and $440cal/m^2/hr$. (48.4%) respectively.