• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.77-98
• /
• 1993

The intent of this study is to analyze the characteristics of distribution, patter, and deposits of the exposed debris slope landform by aerial photography interpretation, measure-ment on the topographical maps and field surveys in the southern part Taebaek mountains. It also aims to research the arrangement types of mountain slope and the landform development of debris slopes in this area. In conclusion, main observations can be summed up as follows. 1. The distribution characteristics 1)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of intrusive rocks with the talus line. 2)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of inrtusive rocks with the talus line. 2) From the viewpoint of distribution altitude, talus is mainly distributed in the 301~500 meters part above the sea level, while the block stream is distributed in the 101~300 meters part. 3) From the viewpoint of slope oriention, the distribution density of talus on the slope facing the south(S, SE, SW) is a little higher than that of talus on the slope facing the north(N, NE, NW). 2. The Pattern Characteristics 1) The tongue-shaped type among the four types is the most in number. 2) The average length of talus slope is 99 meters, especially that of talus composed of hornfels or granodiorite is longer. Foth the former is easy to make free face; the latter is easdy to produce round stones. The average length of block stream slope is 145 meters, the longest of all is one km(granodiorite). 3) The gradient of talus slope is 20~45${^\circ}$, most of them 26-30${^\croc}$; but talus composed of intrusive rocks is gentle. 4) The slope pattern of talus shows concave slope, which means readjustment of constituent debris. Some of the block stream slope patterns show concave slope at the upper slope and the lower slope, but convex slope at the middle slope; others have uneven slope. 3. The deposit characteristics 1) The average length of constituent debris is 48~172 centimeters in diameter, the sorting of debris is not bad without matrix. That of block stream is longer than that of talus; this difference of debris average diameter is funda-mentally caused by joint space of bedrocks. 2) The shape of constituent debris in talus is mainly angular, but that of the debris composed of intrusive rocks is sub-angular. The shape of constituent debris in block stream is mainly sub-roundl. 3) IN case dof talus, debris diameter is generally increasing with downward slope, but some of them are disordered and the debris diameter of the sides are larger than that of the middle part on a landform surface. In block stream, debris diameter variation is perpendicularly disordered, and the debris diameter of the middle part is generally larger than that of the sides on a landform surface. 4)The long axis orientation of debris is a not bad at the lower part of the slope in talus (only 2 of 6 talus). In block stream(2 of 3), one is good in sorting; another is not bad. The researcher thinks that the latter was caused by the collapse of constituent debris. 5) Most debris were weathered and some are secondly weathered in situ, but talus composed of fresh debris is developing. 4. The landform development of debris slopes and the arrangement types of the mountain slope 1) The formation and development period of talus is divided into two periods. The first period is formation period of talus9the last glacial period), the second period is adjustment period(postglacial age). And that of block stream is divided into three periods: the first period is production period of blocks(tertiary, interglacial period), the second formation period of block stream(the last glacial period), and the third adjustment period of block stream(postglacialage). 2) The arrangement types of mountain slope are divided into six types in this research area, which are as follows. Type I; high level convex slope-free face-talus-block stream-alluvial surface Type II: high level convex slope-free face-talus-alluvial surface Type III: free face-talus-block stream-all-uvial surface Type IV: free face-talus-alluval surface Type V: talus-alluval surface Type VI: block stream-alluvial surface Particularly, type IV id\s basic type of all; others are modified ones.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.131-170
• /
• 1991

This study was designed to analyze morphological characteristics of Korean young adults, norms and standard deviation of variables, sexual differences, correlationship between each area of face and correlationship between hard tissue and soft tissue. The primary sample consisted of 45 males and 57 females who were early and middle twenties and had acceptable profile, no history of previous orthodontic treatment, absence of remarkably large overjet and overbite, full complement of permanent teeth, Class I skeletal and dental relationships and good vertical facial proportions. Their cephalograms were analyzed morphologically with a computer morphometrics. Then the final sample - 25 males and 38 females - were selected within 1 S.D. of E-line, ANB, P/A facial height ratio, Interincisal angle, L1 to A-Pog, ODI and APDI. The results of the study were as follows: 1 In the form and proportion of facial skeleton there were no significant differences between males and females, but in the size males were larger than females. 2. The dental protrusion patterns had no significant sexual difference and no significant correlationship between protrusion of upper lip and inclination of upper incisor. But mentolabial angle had positively correlated with interincisal angle and negatively with inclination of upper and lower incisor. 3. In the relationship between nose and soft-tissue profile, males were larger than females in nasal length, height and angular measurements. 4. In analysis of soft-tissue profile, males were larger than females in the length and thickness. In the angular measurements and proportion of soft-tissue profile, there were no significant differences between males and females.

• Journal of Periodontal and Implant Science
• /
• v.34 no.1
• /
• pp.19-28
• /
• 2004

Tooth is the most important element in esthetic consideration on facial area. Tooth alignment which is in harmony with gingiva, lips, and face is also key element. The purpose of this study was to give a clinical discipline for restoration of gingival contour, which contains a ratio of maxillary 6 anterior teeth, research for gingival contour etc., in case of rehabilitation of maxillary anterior teeth. 300 Dankook university dental school students ,who is their twenties and free from periodontitis, participate in this study. The result was from each 70 males and females who had normal occlusion and tooth alignment. Length, width and length/width ratio of maxillary 6 anterior teeth were 0.74-0.81 in male, 0.81-0.84 in female. There was significant difference between male and female. The most deepest position of gingiva in maxillary central incisor and canine was located in distal part of teeth and maxillary lateral incisor was middle portion. In maxillary central incisors, gingival line of the most deepest point appeared significant difference between male and female (p<0.01) whereas there was no difference in lateral incisors and canines. Distance between interdental papilla apex and the most deepest portion appeared significant difference between male and female. Distance of the deepest position of gingiva is statistically significant except maxillary central incisors and lateral incisors. Standard deviation and mean of the width of labio-lingual were measured in cervical area and there was a significant difference both male and female.(p<0.01) From this result, we could get the mean of maxillary anterior gingival line and these results have great value in clinical guidance in studying maxillary anterior teeth.

• The korean journal of orthodontics
• /
• v.12 no.2
• /
• pp.79-93
• /
• 1982

The purpose of orthodontic treatment is to achieve normal occlusion and good facial esthetics for individual patients. To produce harmonized facial balance, treatment planning for patient who require orthodontic treatment should include both a hard tissue and soft tissue cephalometric analysis. Author studied to derive the normal standards of soft tissue profile in Koreans by roentgenocephalometric analysis. For this study 12 soft tissue profile landmarks were plotted and 23 linear length, 9 soft tissue thickness, 8 vertical height length, 12 angles of soft tissue profile, and 3 vertical proportion were measured. The subjects consisted of 166 males and 209 females from 7 to 19 years with normal occlusion and acceptable profiles, and were divided into five groups according to age. The obtained results were as follows; 1. From the basis of N-Pog (Nasion-Pogonion) plane, the growth of facial soft tissue in the middle region especially nose area was greater than others facial region. 2. From the basis of G-Pog' (Glabella-soft tissue Pogonion) plane, the values of linear measurement of soft tissue Nasion and Inferior labial sulcus decreased and nose tip grew forward as growing older. 3. The growth of the facial soft tissue thickness was greatest in superior labial sulcus and the thickness of soft tissue nasion gradually became thinner as growing old. 4. The thickness of upper and lower lip was 14.47mm, 14.57mm in adulr male, 12.76mm, 13.78mm in adult female. 5. The soft tissue thickness of the lower lip was thicker than that of upper lip in all age groups and both sexes, 6. The vertical length of the upper and lower lips were 25.04mm, 49.97mm in adult male and 23.50mm, 48.39mm in adult female. 7. By the significant test, there were significant difference between male and female in fifth adult group on all vertical length measurements of lower face. 8. In fifth adult group, the perpendicular distance from LS, LI to Steiner's line and Ricketts' esthetic line were as follow; Steiner line to LS, LI were 7.98mm, 5.84mm in male. Steiner line to LS, LI were 6.71mm, 5.08mm in female. Ricketts' esthetic line to LS, LI were -0.40mm, 1.72mm in male. Ricketts' esthetic line to Ls, LI were -1.38mm 0.65mm in female. 9. In fifth adult group, the facial convexity angle and lower facial component angle were $171.17^{\circ}142.94^{\circ}$ in male and $172.5^{\circ}$, $144.41^{\circ}$ in female.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.657-673
• /
• 1992

Orthodontic treatment of cleft patients is difficult as the growth is different from that of normal ones. So it is very important to know the characteristic features of the craniofacial morphology and growth pattern in unilateral cleft lip and palate patients. The materials for this study consisted of 55 normal males and 50 unilateral cleft lip and palate ones who received cheiloplasty and palatoplasty previously. The cleft subjects were divided into 4 groups according to their ages kto find out the growth pattern of hard and soft tissue, and to compare the features with those of normal ones. Each cephalogram analysed by McNamara method and others. The obtained results were as follows 1. In the unilateral cleft lip and palate subjects, forward growth of the maxilla was smaller than that of normal ones from 9 years old. So the maxilla was retruded. The maxillary incisors were severely retruded in all age groups. 2. The mandibular overall length and its anteroposterior position did not show any significant differences between two groups. But the height of ramus was very short and the mandible had vertical growth tendency to compensate for undergrowth of the maxilla in cleft subjects after 12 years of age. 3. Horizontal growth of the soft tissue in middle face was smaller than that of any other facial region from 9 years old. The vertical growth rate of upper lip was decreased as growing old. 4. In cleft subjects, the upper and lower facial component angle and the facial convexity angle were large. So their facial profile changed to straight or concave as growing old.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.3
• /
• pp.289-302
• /
• 2006

For a reconstruct draft of the Gyupyo (Gnomon) in King Sejong Era, we collected a lot of documents of the Chosen Dynasty. With the result we made a reduced model by 1/10 and drawing set for the Gnomon in Sejong Era. It is composed of the Gyu, Yongpyo, Hoengryang (a beam), Yeongbu and granitic prop. You can read the scale where the shadow of vertically-standing stick touches the horizontal Gyu. A Shadow-Define. (Yeongbu) was used to focus the shadow cast by the sun's center, measuring the (gnomon) shadow length precisely. A Yeongbu is made of a leaf of copper in the middle of which is pierced a pin-hole for the tiny optical image of the sun which tilted to face the incident sunlight, used the principle of the a pin-hole camera and Scheimplug principle.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.2
• /
• pp.181-220
• /
• 1998

1. PURPOSE This is a quantitative analysis of Sasang Constitution by measuring human body except face. This study is carried out for the purpose of searching out the theory of Sa-cho and the morphologic theory of Sasang Constitution. 2. METHOD (1) SUBJECTS Subjects are 338 person came to Dept. of Sasang Constitutional Medicine (KyungHee Oriental Medical Center) and Oriental Medicine and Western Medicine Cooperative Health Examination Center (KyungHee Medical Center) from October 1997 to Jauary 1998. The mean age is $41.7{\pm}12.39$. (2) CLASSIFICATION OF SASANG CONSTITUTION QSCCII(Questionnaire for the Sasang Constitution Classification) is used for the Classification of Sasang Constitution. The distributions of Sasang Constitution Classification are Soeumin 83, Soyangin 98, and Taeumin 157. (3) MEASURING INSTRUMENT & ITEMS Length, Breadth, Circomferece, and Skinfold thickness of each body segment are measured by Martin's measuring instrument and Skinfold Caliper. Measured items of this study is based on Lohman's methods and is added new items. (4) DATA ANALYSIS The Volume, Weight, Rate, and Index of each group are calculated by using measuring items. The difference of each group is analyzed by SPSS 7.0 for Win. 3. RESULT (1) THE MORPHOLOGIC CHARACTERISTIC of TAEUMIN First of all, the Taeumin has a emormous morphology. His trunk is huge but head-neck and limbs is small. The volume and weight of head-neck is smaller than other body segments but the volume and weight of upper-abdomen is bigger than ones. (2) THE MORPHOLOGIC CHARACTERISTIC of SOEUMIN The Soeumin has a small morphology. His head-neck rate is bigger than Taeumin's but his trunk rate is smaller than Taeumin's. And his lower limbs rate is bigger than other constitution but it's not a significant difference. His neck is thinest and longgest than others. His chest is thin and narrow. His lower-abdomen rate is bigger than other constitution but it's difference is not significant. (3) THE MORPHOLOGIC CHARACTERISTIC of SOYANGIN Soyangin has a middle size at head-neck and chest part. But the rate of upper limb is higer than other constitution. And the rate of lower-abdomen part is lower than other constitution. but that's not significant.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.72-84
• /
• 2010

This study was attempted in order to offer basic data for implementing and applying Samjonseokjo(三尊石造), which is one of traditional stone construction method, by confirming how the constructive principle is expressed such as proportional beauty, which is contained in the modeling of Triad of Buddha Carved on Rock that was formed in the period of the Three States, centering on Triad of Buddha Carved on Rock in Susan. The summarized findings are as follows. 1. As a result of analyzing size and proportion of totally 17 of Triad of Buddha Carved on Rock, the average total height in Bonjonbul(本尊佛) was 2.96m. Right Hyeopsi(右挾侍) was 2.19m. Left Hyeopsi(左挾侍) was 2.16m. The height ratio according to this was 100:75:75, thereby having shown the relationship of left-right symmetrical balance. The area ratio in left-right Hyeopsi was 13.4:13.7, thereby the two area having been evenly matched. 2. The Triad of Buddha Carved on Rock in Seosan is carved on Inam(印岩) rock after crossing over Sambulgyo bridge of the Yonghyeon valley. Left direction was measured with $S47^{\circ}E$ in an angle of direction. This is judged to target an image change and an aesthetic sense in a Buddhist statue according to direction of sunlight while blocking worshipers' dazzling. 3. As for iconic characteristics of Buddha Carved on Rock in Seosan, there is even Hyeopsi in Bangasang(半跏像) and Bongjiboju(捧持寶珠) type Bosangipsang. In the face of Samjon composition in left-right asymmetry, the unification is indicated while the same line and shape are repeated. Thus, the stably visual balance is being shown. 4. In case of Triad of Buddha Carved on Rock in Seosan, total height in Bonjonbul, left Hyeopsi, and right Hyeopsi was 2.80m, 1.66m, and 1.70m, respectively. Height ratio in left-right Hyeopsibul was 0.60:0.62, thereby having been almost equal. On the other hand, the area ratio was 28.8:25.2, thereby having shown bigger difference. The area ratio on a plane was grasped to come closer to Samjae aesthetic proportion. 5. The axial angle of centering on Gwangbae was 84:46:50, thereby having been close to right angle. On the other hand, the axial angle ratio of centering on Yeonhwajwa(蓮華坐: lotus position) was measured to be 135:25:20, thereby having shown the form of inequilateral triangle close to obtuse angle. Accordingly, the upper part and the lower part of Triad of Buddha Carved on Rock in Susan are taking the stably proportional sense in the middle of maintaining the corresponding relationship through angular proportion of inequilateral triangle in right angle and obtuse angle. 6. The distance ratio in the upper half was 0.51:0.36:0.38. On the other hand, the distance ratio in the lower half was 0.53 : 0.33 : 0.27. Thus, the up-down and left-right symmetrical balance is being formed while showing the image closer to inequilateral triangle. 7. As a result of examining relationship of Samjae-mi(三才美) targeting Triad of Buddha Carved on Rock in Susan, the angular ratio was shown to be more notable that forms the area ratio or triangular form rather than length ratio. The inequilateral triangle, which is formed centering on Gwangbae(光背) in the upper part and Yeonhwajwa(lotus position) in the lower part, is becoming very importantly internal motive of doubling the constructive beauty among Samjae, no less than the mutually height and area ratio in Samjonbul.